Avtopralnica

Terex M 2100-3

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1999, IMMEDIATELY AVAILABLE – Chamber filter press by Häcker with supporting frame and 50 m³/h Abel pump for sale. Plate size: 1200 x 1200 mm, approx. 90 PP plates, 30 mm cake thickness, capacity approx. 2700 liters, automatic plate shifting, open discharge into double-sided filtrate trough, press is ready for operation directly after installation. Abel pump was serviced by the manufacturer shortly before decommissioning. Galvanized support frame with staircase access. Located near Würzburg. Ledjrunu Iepfx Abborg

Leto izdelave: 2025, Stanje: novo, ⭐️4-Post Automotive Workshop Lift⭐️ TM-GROUP 4SF-4000B - 4 Ton Automatic WHEEL ALIGNMENT / GEOMETRY HIGH-QUALITY OIL AND INSTALLATION KIT INCLUDED FOR FREE Specification: ✅ Manufacturer: TM-GROUP ✅ Maximum lifting capacity: 4 tons ✅ Type: Automatic ✅ Underside connection ✅ Power supply: 400V (230V optional) ✅ Lifting time: 60 seconds Lodpew Ta I Tjfx Abborg ✅ Lifting height: 1750 mm ✅ Limit switch: Yes ✅ Motor power: 2.2 kW ✅ Telescopic rolling jack arms, allowing vehicle lifting under the side sills ✅ Turntable plates (with locking option) ✅ Pre-installed turntable locations ✅ Self-lowering ramps ✅ Automatic locks create a blocking threshold for the vehicle ✅ Anchoring kit included: Yes ✅ Hydraulic oil 10L: Included free ✅ Compliant with requirements for UDT certification: Yes ✅ Ramp length: 4250 mm ✅ Ramp width: 918-1118 mm Is this lift suitable for me? The automatic four-post lift is suitable for handling virtually any passenger car, from a 2-door coupe to large 4x4 off-road vehicles. The 4000kg (4T) lifting capacity also allows it to handle smaller commercial vans. This lift provides full servicing and repair capabilities for larger and heavier vehicles. What about the range of repairs? Our lift is ideal for wheel alignment, suspension, engine, or gearbox repairs. The high lifting (175 cm to the base of the tire—practical lifting increased by half the wheel diameter) allows for any inspection. Documentation: The lift is supplied with all necessary documentation: ✅ Declaration of conformity with CE certificate ✅ Operating manual in English ✅ Rolling jack included FREE!

Stanje: dober (rabljeno), Leto izdelave: 1980, filtrirna površina: 98 m², pritisk: 15 letvica, debelina torte: 25 mm, Plant: Used mobile chamber filter press / filter press Manufacturer: Filox 800 x 800 Year of manufacture: 1980 Lsdpfx Abeqa Dtqsborg Plate size: 800 x 800 mm Useful length: 5,200 mm Number of chambers: 88 pcs Cake thickness: 25 mm Filtration pressure: 15 bar Closing pressure: Min. 300 bar, Max. 320 bar Total filter area: approx. 98 sq m Total cake volume: approx. 1,100 litres Motor voltage: 380 V, 50 Hz Protection class: IP 44 Plate material: PP Discharge: open Operating side: left Filter cloths: optional

Stanje: rabljeno, prevoženi kilometri: 67.050 km, moč: 95 kW (129,16 KM), prva registracija: 10/2002, skupna masa: 4.600 kg, vrsta goriva: dizel, barva: zelen, vrsta prenosa: samodejen, število sedežev: 6, Oprema: ABS, centralno zaklepanje, elektronski program stabilnosti (ESP), klimatska naprava, parkirni grelec, Internal vehicle no.: 0739D ----Why autonext GmbH? One of the largest commercial vehicle exhibitions in Germany Always over 400 vehicles immediately available Largest selection - Best price More than 1,000 satisfied customers per year - Top customer ratings WhatsApp Chat: ### Offer: Financing from 4.99% ### ----- * 1 owner (official/government vehicle, which means continuous maintenance) * Perfect base for camper conversion * Optional: Retrofit tow bar for only €599 * Optional: Window tinting available * Good and well-maintained condition * German vehicle * Full service history * Excellent all-weather tires * Number of seats: 6 * Automatic transmission * Air conditioning * Vehicle generator "Camino" from SET Stromerzeuger GmbH, regularly serviced and only 1,510 operating hours * Electrolux heating and air conditioning * Webasto auxiliary heater (parking heater) * Rear axle differential lock? * Rear table * Pop-top roof * Adjustable roof spoiler * 230 volt sockets * CEE plug * Reinforced 2nd battery (88 Ah) * Passenger airbag * Driver's airbag * Exterior mirrors electrically adjustable and heated (both sides) * Kombi chassis version * 150 A generator * Passenger’s side grab handle * Tailgate with glass (opening angle 180 degrees) * Fuel tank: main tank 100 litres * Reading light * Front stabilizer * Additional heater * Dual rear wheels * Rear stabilizer * Rear-wheel drive * Engine: 2.2 L - 95 kW CDI * Wheelbase: 4,025 mm * Permissible total weight: 4.60 t * New inspection/emissions testing (HU/AU) on request ----Warranty & "TÜV Profi Check" are, of course, available from us! We are happy to accept your vehicle in trade-in! We can also provide you with a tailor-made financing or leasing offer—no down payment, redeemable at any time, and with special repayment possible. Let our sales team know your wishes, we are happy to advise you. ----Arrange a test drive appointment and see for yourself the quality of our vehicles. Appointments: Mon.–Fri. from 08:30–18:00, Sat. from 09:30–13:30 Lrodevhw Sbspfx Abbog ----Visit us also on [website]. We look forward to your visit! ----Errors and changes excepted. The equipment offered online is not part of the contract. Equipment must be verified on site.

Stanje: rabljeno, Unit: Chamber filter press, used Type: Netzsch Filter plate size: 1200x1200 mm Number of plates: 74 pcs Filter plates: PP (polypropylene) Filter cloths: optionally available, tailored to the medium Filter area: approx. 204 m² Chamber volume: approx. 2719 dm³ Filtration pressure: approx. 15 bar Pump system: optional Dimensions: L 8933 x W 2240 x H 1900 mm Lrjdpfxst Ay Svo Abbsg Purchase or rental: Inspection of the units possible on request at our facility.

Stanje: rabljeno, Plant: Chamber filter press, used, mounted on a steel frame, semi-mobile Application: Sludge dewatering Design: R+B 1200/1200/125/30 head-guided Filter plate size: 1200x1200 mm Lrsdpsrk Ebkofx Abbjg Number of plates: approx. 125 Filter plates: PP (polypropylene) Cake thickness: 30 mm Chamber volume: approx. 3.8 m³ Filter cloths: optionally available, tailored to the medium Filtration pressure: approx. 15 bar Pump technology: available as an option upon request Power connection: 400 Volt / 125 A (CEE) Weight: approx. 65 t, plus filter cake Chamber volume: approx. 3.8 m³ Polymer dosing pump: e.g. max. 1.5 m³/h – optional, subject to agreement Manual polymer station: optional on request, e.g. consisting of 2 agitator tanks with mixer, approx. 2 m³ each Sludge conditioning tank: optional on request, e.g. capacity approx. 1.8 m³ Purchase or rental: Inspection of the plants at our works possible by arrangement. Other: Would you like to rent or purchase this plant? Please contact us – we are happy to assist you.

Stanje: novo, Extracted air flow rate at connection*: 3550 m³/h (free suction) Total power consumption*: 0.88 kW Operating voltage: 400 V, 50/60 Hz, 3Ph+PE Noise level*: 73 dB(A) Dimensions L/W/H in mm: L 1283 / W 1020 / H 595 Colour: RAL 7035 Weight: 170 kg Manufacturer: ISI Industrieprodukte GmbH Lrsdpfx Abjh Rdypebog *Depending on filter configuration Special voltages and special colours available on request. Application: Extraction of oil mist and fumes, suitable for small to very large machine work areas (oil mist separator). Your benefits with the ELBARON series: - 18 device variants available - Directly from the manufacturer - ISI-TRONIC digital filter control as standard - Electronically regulated EC fan as standard - Adjustable speed and air flow - Available in simplex (single-stage) or duplex (two-stage) versions - Wide range of air flow rates available - Adaptable to contaminant load and required air volume - Extensive range of installation and connection accessories - Quality – Made in Germany We have developed the ELBARON® filter series for use in machining processes with pure oil and for the separation of oil mist and fumes. For many years, the digital electrostatic air filters of the ELBARON® series have been among the most efficient filter units on the market and are used worldwide. Our filter units are already fully digitalized as standard and can, for example, be operated via laptop. The ELBARON® series includes 18 device variants, which can be precisely adapted in size and performance to your application. ELBARON® units impress with long service life and absolute operational reliability. Our electrostatic filter cells are dimensioned to achieve optimum filtration efficiency, long service intervals and trouble-free operation from an economic perspective.

Stanje: novo, Extraction capacity of filter unit at nozzle*: 600/720* m³/h Lrjdpfxsh Rynqj Abbog Total power consumption*: 0.42 kW Operating voltage: 230 V, 50/60 Hz, 1Ph+N+PE Noise level*: 67 dB(A) Dimensions L/W/H in mm: approx. L 800 / W 493 / H 415 Colour: RAL 7035 Weight: 53 kg Manufacturer: ISI Industrieprodukte GmbH, Germany * Depending on filter configuration Special voltages or custom colours available on request Application: Separation of emulsion mist, for small to medium-sized machine workspaces. Your advantages: - Compact dimensions - High-efficiency EC fan as standard - Speed and airflow adjustable (optional) - Washable pre-filter - Separation efficiency up to 99.95% using H13 HEPA filter - Wide range of installation and connection accessories - Flexible adaptation to application requirements - Optimised service life - Quality made in Germany With our TEBARON, we offer a compact air filtration unit tailored to meet the diverse demands of modern machining processes and the resulting emission profiles. The TEBARON is designed as a compact air filtration solution for the separation of emulsion mist in small to medium-sized machine workspaces. Our primary development focus was on achieving compact dimensions combined with maximum energy efficiency, cost-effective operation due to low follow-up costs, and maximum sustainability. To fulfil these objectives, the TEBARON series is equipped with high-efficiency, adjustable EC fans. The standard integrated pre-filter package consists of three fully washable stages, providing high effectiveness against liquids and medium-to-large particles to protect the main filter and maximise its service life. The main filter can be customised to the specific application. As standard, we use an H13 HEPA filter, providing a separation efficiency of 99.95% for particles as small as 0.3 μm.

Stanje: rabljeno, Centrifugal pump, high-pressure pump, water pump, multistage vertical centrifugal pump, pressure boosting pump, pressure intensifier pump - Manufacturer: KSB, high-pressure pump Movichrom - G 9/2 PN16 G2 - Drive: 1.1 kW - Speed: 2825 rpm Lrjdpfxsd Sntbe Abbjg - Max. flow rate: 9 m³/h - Max. head: 22 m - Price: per unit - Quantity: 1 unit - Dimensions: 250/210/H555 mm - Weight: 37 kg/unit

Stanje: novo, Leto izdelave: 2025, Mechanical air filter with 3-stage filtration system for the extraction of oil mist / emulsion mist / grinding mist from machine tools. Can be used flexibly or mounted on a single-column stand behind the machine. Lrodpfxoin Dbre Abbjg Extraction capacities from 1,000 to 4,000 m³/h (sufficient also for enclosed turning / milling / grinding machines / machining centers etc. with an enclosed working area of up to approx. 30 m³)