Pometalni stroj za čiščenje
Tennant M30

Name: Tennant M30
Brand: Tennant
Availability: InStock

Stanje

Rabljeno

Lokacija

Nederland

Prikaži karto

Podatki o stroju

Opis stroja:: Pometalni stroj za čiščenje

Proizvajalec:: Tennant

Model:: M30

Stanje:: rabljeno

Obratovalne ure:: 2.572 h

Cena in lokacija

Lokacija:: Nederland

Klic

Podrobnosti ponudbe

ID ponudbe:: A12197435

Št. reference:: 253649

Nazadnje posodobljeno:: dne 16.07.2025

Opis

The Tennant M30 boosts productivity by delivering exceptional sweeping and scrubbing performance, while also promoting improved health and safety.

The machine is easy to operate and maintain, and swiftly enhances your facility’s image by cleaning in a single pass (wet or dry). Furthermore, the machine cleans up to three times longer on a single water tank, utilizing Tennant’s innovative ec-H2O technology that uses up to 70% less water.

This Tennant M30 comes standard with:

- Complete maintenance service,
- New battery pack,
- Free on-site delivery,
- New wear parts and squeegees,
- Service and overhaul,
- Training and instruction,
- Cleaning agents,
- Brushes and accessories tailored to your floor.

Other specifications:

- Type: Sweeper-scrubber,
- Condition: Used/Pre-owned,
- Brand: Tennant,
- Model: M30,
- Operator position: Ride-on,
- Theoretical capacity: 15,860 m²/h,
- Side brush diameter: 53 cm,
- Scrubbing width: 157 cm,
- Squeegee width: 150 cm,
- Number of brushes (scrub): 2,
- Brush type: Cylindrical,
- Scrub brush diameter: 30.5 x 122 cm,
- Brush pressure (scrub): 193 kg,
- Debris hopper capacity: 198 liters,
- Solution tank capacity: 284 liters,
- Recovery tank capacity: 360 liters,
- Power source: 36V battery,
- Hopper dump system: High-dump,
- Maximum dump height: 152 cm,
- Filter area: 7.3 m²,
- Filter type: Panel filter,
- Maximum speed: 13 km/h,
- Maximum climb angle: 10%,
- Drive: Rear-wheel drive,
Pgodsnyiv Nspfx Adyog
- Filter shaker: Electric,
- Weight (excl. batteries): 1,815 kg,
- Weight (incl. batteries): 2,449 kg,
- Dimensions (LxWxH): 274 x 162 x 147 cm,
- Availability: In stock,
- Operating hours: 2,572 hrs,

You can also rely on Metech for all maintenance and reordering of cleaning supplies for this machine. Besides this used Tennant M30, we also have new and pre-owned sweeper-scrubbers available. Check out our sweeper-scrubbers for more information.

Would you like more information about this Tennant M30? Please contact us — we are happy to provide further details.

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.

Ponudnik

Nazadnje na spletu: prejšnji teden

Registriran od: 2020

97 Oglasi na spletu

Klic

Pošlji zahtevo

Telefon & Faks

+31 342 2... oglasi

Ti oglasi bi vas prav tako lahko zanimali.

Mali oglas

Center CNC za struženje in rezkanje DOOSAN Puma TT 1800 SY

Bühl

587 km

Center CNC za struženje in rezkanje
DOOSANPuma TT 1800 SY

Klic

Stanje: rabljeno, Leto izdelave: 2007, Swing diameter 300 mm Turning length 600 mm Control FANUC, 18i-TB Swing diameter over cross slide 230 mm Travel X1 165 mm Travel Z1 700 mm Travel X2 190 mm Travel Z2 720 mm Travel Y +/- 50 mm Main spindle bore 76 mm Main spindle speed 5,000 rpm Pjdpfx Ajxn Amtjdyogg Main spindle motor 22 kW Spindle torque 208 Nm Counter spindle bore 76 mm Counter spindle speed 5,000 rpm Counter spindle motor 22 kW Spindle torque 208 Nm Tool turret 2 x 12 stations Number of live tool stations 2 x 12 Live tooling speed 5,000 rpm Torque 47 Nm Tool drive power 5.5 kW C-axis resolution 0.001° Rapid traverse X + Z axes 20 / 40 m/min Rapid traverse Y axis 7.5 m/min Total connected load 68.4 kVA Machine weight approx. 7.8 t Accessories: Collet chuck on main spindle, hydraulic 3-jaw chuck KITAGAWA BB208, 210 mm diameter, on counter spindle, various tool holders for turret, short bar loader by HYDRAFEED, model MULTIFEED MX-1B for bar diameter 3 - 80 mm and bar lengths up to 1650 mm; chip conveyor, coolant system with band filter unit

Poglej podrobnosti

Mali oglas

CNC center za struženje in rezkanje DMG Gildemeister SPRINT 65 Linear

Uden

917 km

CNC center za struženje in rezkanje
DMG GildemeisterSPRINT 65 Linear

27.500 €

FCA Začetna cena brez DDV

Klic

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, obratovalne ure: 52.455 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2501-0154, stružna dolžina: 600 mm, premer struženja nad prečnim suportom: 140 mm, premer struženja: 300 mm, moč vretenovega motorja: 25.000 W, hitrost vretena (min.): 5.000 obr/min, največja hitrost vretena: 5.000 obr/min, pomik po osi Z: 900 mm, hitro pomikanje X-os: 3 m/min, hitri pomik os Y: 3 m/min, hitri pomik na osi Z: 3 m/min, največja hitrost vrtenja: 4.000 obr/min, vrtljajska hitrost (min.): 4.000 obr/min, vrtilni moment: 239 Nm, prehod palice: 80 mm, hitrost pomika os X: 165 m/min, hitrost podajanja osi Y: 165 m/min, hitrost podajanja os Z: 220 m/min, skupna masa: 10.500 kg, Oprema: dokumentacija / priročnik, The machine is still in operation and can be inspected under working conditions at VOVU Machining in Uden. In total, there are 6 identical machines available here. Equipped with a Fanuc 310is control unit. Pgsdsur Hfzjpfx Adyog

Poglej podrobnosti

Mali oglas

Valjčni blok, naprava za obračanje zabojnikov 100t A&N Pr 100-150

Kreuztal

741 km

Valjčni blok, naprava za obračanje zabojnikov 100t
A&NPr 100-150

Klic

Leto izdelave: 2009, Stanje: delavnici obnovljeno (rabljeno), The roller stand is also available for rental (trial rental possible). Maximum load: 100t per set, consisting of 1x drive and 1x idler unit Workpiece diameter: 500 – 7,500 mm Rotation speed: approx. 130 - 1250 mm/min Roller material: polyurethane Control: wired handheld pendant Pgedpfsmk Iktex Adyog Additional options available, e.g.: additional idler units, foot switch

Poglej podrobnosti

Mali oglas

Kotli za gredice Novi Samovozni TICAB Crack Sealer BPM-500 (without trailer)

Rzeszów

682 km

Kotli za gredice Novi Samovozni
TICABCrack Sealer BPM-500 (without trailer)

Klic

Mali oglas

Bühl

587 km

CNC stružnica
EMCOMAXXTURN 45

Klic

Stanje: rabljeno, Leto izdelave: 2007, Turning diameter: 300 mm Swing diameter over bed: 430 mm Swing diameter over carriage: 300 mm Control: SIEMENS, SINUMERIK 840 D Travel - X: 160 mm Pgodewx R Rkjpfx Adyeg Travel - Z: 510 mm Max. part length: 480 mm Main spindle bore: 53 mm Main spindle speed: 0 - 7000 rpm Spindle nose: DIN 55026 A2-5 Spindle torque: 100 Nm Main spindle motor: 15 kW Sub-spindle bore: 53 mm Sub-spindle speed: 0 - 7000 rpm Spindle nose: DIN 55026 A2-5 Spindle torque: 100 Nm Sub-spindle motor: 15 kW C-axis resolution: 0.001° C-axis rapid traverse: 1000 rpm Tool turret: 1 x 12 stations Number of driven tool stations: 1 x 12 Tool holder: cylindrical shank (DIN 69880) VDI 25 Driven tool speed: 0 - 8000 rpm Torque: 16 Nm Power: 4 kW Feed force X/Z axis: 4000 / 6000 N Rapid traverse X-axis: 24 m/min Rapid traverse Z-axis: 30 m/min Total power requirement: 38 kVA Machine weight: approx. 4 t Machine dimensions (L x W x H): 2.65 x 1.84 x 2.32 m Accessories: collet chuck 173 E on main spindle, collet chuck 163 E on sub-spindle, bar feeder manufacturer FMB, type turbo 3-36/3200 A, year 2018 for bar diameters up to 36 mm and bar lengths up to 3200 mm; various tool holders for turret (no driven holders), coolant system

Poglej podrobnosti

Mali oglas

Nemčija

682 km

Stroj za hladno valjanje
EXCELLOXK 875

Klic

Mali oglas

Valjčna brusilka KELLENBERGER KEL-VARIA UR 175/1000

Bienne

599 km

Valjčna brusilka
KELLENBERGERKEL-VARIA UR 175/1000

Klic

Stanje: dober (rabljeno), Leto izdelave: 1999, obratovalne ure: 16.000 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 650341, Year 1999 with Fanuc 18 TB - 3 axes XZB Marposs E30/E20 Country of manufacture: CH Voltage: 400V/50Hz/3ph Dimensions: 410x220x190 cm Net machine weight: 5,000 kg TECHNICAL SPECIFICATIONS CNC control: Fanuc 18TB Intermediate Section Fixed intermediate section: grinding head R Swiveling section with manual indexing 2.5°: R / RS / UR / URS -210° to +30° Swiveling section with automatic indexing 2.5°: R / RS / UR / URS -210° to +30° B axis, resolution 0.1”: R / RS / UR / URS -210° to +30° Standard workhead Swivel range: -10° (+100°) Spindle speed (continuous): 6 – 600 rpm Internal taper mounting: MT5 Reducing sleeve: MT5/MT4 Short outer taper mounting: DIN 55026 / Size 5 Permissible load: 160 Nm Guaranteed roundness for chucking operations Standard: 0.5 µm Option: 0.2 µm Workpiece weight between centers: 150 kg Tailstock Taper mounting: MT4 Quill stroke: 50 mm / 2° Option: fine adjustment with correction (Ø +/- 150 µm) Wheel data Diameter 300: 27 m/s Diameter 400: 35 m/s Diameter 500: 45 m/s UR grinding head Power: 9.2 kW / 12.5 HP Left grinding wheel, max.: Ø 500 x 80 mm Right additional wheel, max.: Ø 400 x 63 mm Internal grinding device: HJN 828 spindle Lower table (Z axis) Distance between centers: 1000 mm Max travel: 1150 mm Max speed: 15 m/min Pjdpew T Tb Hjfx Adysgg Max resolution: 0.1 µm Upper table Distance between centers 1000 mm, swiveling 0 to 9° Grinding carriage (X axis) Max travel: 320 mm Max speed: 7.5 m/min Max resolution: 0.1 µm Pneumatics Minimum connection: 6 bar Air consumption: approx. 0.6 m³/h Coolant Max connection pressure: 3 bar Required space (version 1000): 3600 x 2000 mm Except for error or omission, technical data is supplied without obligation.

Poglej podrobnosti

Mali oglas

CNC stružnica HWACHEON HI-TECH 450 BL YMC

Lontzen

832 km

CNC stružnica
HWACHEONHI-TECH 450 BL YMC

Klic

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, Longueur de tournage max. : 1 214 mm Diamètre de tournage max. : 420 mm Taille du mandrin : 305 mm Diamètre de tournage max. au-dessus du banc : 700 mm Courses de déplacement Pgjdpew Tcvmjfx Adyog - Axe X : 280 mm - Axe Y : 120 mm - Axe Z : 1 390 mm Vitesse de déplacement rapide - Déplacement rapide X/Y/Z : 20 / 10 / 24 m/min Broche - Passage de barre : 89 mm - Vitesse max. : 2 500 tr/min - Puissance moteur : 22 / 18,5 kW - Couple : 1 050 / 883,8 Nm Tourelle - Postes outils : 12 - Postes outils entraînés : 12 - Interface porte-outil : BMT-65 Equipements : • Glissières prismatiques • Axe C • Axe Y • Pistolet d’air comprimé • Support de lunette • Lunette manuelle, fabricant RICHTER • Convoyeur de copeaux • Contre-pointe automatique avec fourreau • Éclairage de travail • Capacité réservoir de liquide de coupe : 240 litres Alimentation requise : 55 kVA Poids : env. 7 800 kg

Poglej podrobnosti

Mali oglas

Center CNC za struženje in rezkanje DOOSAN Puma TT2100SYY

Oak Forest

7.638 km

Center CNC za struženje in rezkanje
DOOSANPuma TT2100SYY

Klic

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Doosan Puma TT2100SYY Baujahr 2019 Werkzeugausstattung wie abgebildet Technische Daten: Umlaufdurchmesser über Bett: 230 mm Max. Drehdurchmesser: 230 mm Spitzenweite: 978 mm X-Achse Verfahrweg: 165 mm Y-Achse: Ja Y-Achse Verfahrweg: 100 mm Z-Achse Verfahrweg: 699 mm C-Achse: Vollkontur C-Achse Spannfuttergröße: 203 mm Stangendurchlass: 66 mm Spindelnase: A2-6 Spindelmotorleistung: 26 kW (35 PS) Spindeldrehzahl: 5.000 U/min Eilgang X-Achse: 30 m/min Eilgang Z-Achse: 40 m/min Gegenspindel: Ja Gegenspindel – Spannfuttergröße: 203 mm Gegenspindel – Stangendurchlass: 65 mm Pgodjw Dvnxjpfx Adyog Gegenspindel – Spindelnase: A2-6 Gegenspindelmotor: 19 kW (25 PS) Gegenspindeldrehzahl: 5.000 U/min Gegenspindel/W-Achse Verfahrweg: 730 mm Revolverkopf Kapazität: 12 Positionen Revolvertype: BMT55 Angetriebene Werkzeuge: Ja Werkzeugdrehzahl angetrieben: 5.000 U/min Motorleistung angetriebene Werkzeuge: 7,5 kW (10 PS) Revolver 2 Kapazität: 12 Positionen Revolver 2 – X-Achsen-Verfahrweg: 165 mm Revolver 2 – Z-Achsen-Verfahrweg: 700 mm Abmessungen: 2.362 x 3.886 mm (mit Späneförderer 4.724 mm) x 2.250 mm (H) Gewicht: 9.500 kg Ausstattung: FANUC OiTF CNC-Steuerung DOOSAN EZ Guide i Programmierhilfe Zwillingsrevolver (oben/unten) mit je 12 Positionen und 24-fache Indexierung pro Revolver mit Grundhalterungssystem Y-Achse auf beiden Revolvern 2 integrierte Spindeln Vollkontur-C-Achse auf beiden Spindeln Fräsen/bohren auf beiden Revolvern (oben/unten) Ablaufteilefänger links und rechts Programmierbare Teileausgabe Teileförderer Stangenlader-Schnittstelle Jeweils 8" 3-Backen KITAGAWA Futter (Kolletvorrichtungen am Maschinenbett nicht im Verkauf enthalten) 2 X-Achsen angetriebene Halter 2 Z-Achsen angetriebene Halter Standard statische Werkzeugbestückung ab Werk DOOSAN Werkzeugüberwachungssystem Luftdüsen-System zur Spannfutterreinigung 2 Maschinen verfügbar

Poglej podrobnosti

Mali oglas

CNC stružno-rezkalni center Cnc lathe Hyundai WIA L200Y

Alblasserdam

983 km

CNC stružno-rezkalni center
Cnc lathe Hyundai WIAL200Y

Klic

Stanje: rabljeno, Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: G3169-0110, stružna dolžina: 530 mm, premer struženja: 420 mm, hitrost vretena (min.): 20 obr/min, največja hitrost vretena: 4.000 obr/min, izvrtina vretena: 65 mm, potovalna razdalja osi X: 220 mm, pomik osi Y: 80 mm, pomik po osi Z: 550 mm, skupna masa: 4.700 kg, premer struženja nad ležiščem sani: 800 mm, HYUNDAI WIA L200SY CNC STRUŽNICA CENTER Psdex I A Hcjpfx Adyogg Leto: 2012 | CNC upravljanje Fanuc 18i-TB Serijska št.: G3169-0110 • 5-osni CNC stružni center – Hyundai WIA L200SY • Glavni vpenjalni tulec: 8″ | Pomožno vreteno: 5″ • Pogonjeno orodje in Y-os + indeksiranje C-osi • Max. premer struženja: ca. 419–420 mm / 16,5″ • Max. dolžina struženja: ca. 520–530 mm / ~20,5–20,9″ • Premer nad posteljo: ca. 800 mm / 31,5″ • X-hod: ca. 220 mm / 8,7″ • Z-hod: ca. 550 mm / 21,7″ • Y-hod: ca. 80 mm / 3,1″ • Max. hitrost glavnega vretena: do 4.000 obr/min • Moč glavnega vretena: ca. 20 KM (~15 kW) • Hitrost pomožnega vretena do 6.000 obr/min • Indeksiranje C-osi: možno do 0,001° • Orodne postaje: ca. 12 • Vključen hladilni sistem in transporter ostružkov • Approx. dimenzije: 120″ × 68″ × 80″ • Približna teža: ~10.500 lbs (~4.760 kg) OPOMBA: STROJ JE BIL ODSTRANJEN IZ DOBREGA OBRATOVALNEGA STANJA PRED 2 LETOMA. PREDVIDENA JE BILA PONOVNA UPORABA, VENDAR PRODAVALEC NE BO VEČ OPRAVLJAL OBDELOVALNIH DEL.

Poglej podrobnosti

Oglašujte tukaj