Dvonivojski portalni žerjav iz cevastega jekla

TEICHMANN / AUMUND

Leto izdelave: 1991, stanje: zelo dobro (rabljeno), Track gauge approx. 40.0 m Outreach usable on both sides/total approx. 10.0/14.0 m Lifting height/hoist travel approx. 8.0 m Make/rebuild AUMUND/TEICHMANN Year of manufacture/rebuild 1991/2024 Crane equipped with: - Walk-on twin-rail trolley with DEMAG electric hoist, optionally with twin hoists and conversion to rotating trolley Hnsdpfx Ageqcu Tfjijk - Onboard operator cabin control, optional radio remote control - Scissor guide for load stabilization with slewing gear for motor grab attachment

Leto izdelave: 2023, stanje: pripravljen za uporabo (rabljen), Two Vecoplan drag chain conveyors available. 1) VKU 800, year of manufacture: 2023, drive power: 5.5 kW, belt speed: 24 m/min, conveying capacity: approx. 120 m³/h, belt width: 820 mm, max. incline: 70°, section length: 10.2 m. 2) VKU 1100, year of manufacture: 2023, drive power: 11 kW, belt speed: 24 m/min, conveying capacity: 180 m³/h, belt width: 1,150 mm, max. incline: 70°, section length: 22 m. Documentation available. Inspection on site possible. Hnsdpst Iw Ryjfx Agijk

Leto izdelave: 1987, stanje: generalkompletno obnovljen (rabljeno), Gauge (center-to-center) approx. 40.00 m Total outreach with fixed support, one-sided, approx. 6.5 m Lifting height / Hook path approx. 8.0 / 10.0 m Hnodpfx Agjmdruzoisk - SWF monorail trolley - Radio remote control and pendant control

Leto izdelave: 1999, stanje: generalkompletno obnovljen (rabljeno), Gauge (track width) approx. 20.0 m Outreach usable on both sides approx. 5.0 m Lifting height approx. 9.0 m - Two-rail underslung trolley with reinforced bottom flange, optionally with twin hoists (2 x 5.0 t) or single hoist (10.0 t) Hedpfx Agjmdrwkoisnk - Radio remote control (cabin control retrofittable) - Crane travel units with stepless frequency inverter control

Leto izdelave: 2000, stanje: zelo dobro (rabljeno), Track gauge approx. 20.0 m Lifting height approx. 8.0 m Manufacturer/Overhaul: HILGERS/TEICHMANN Conversion/Overhaul: 2000/2023 Hnedpfx Aoqfc Egjgiek Crane equipped with: - Two-rail trolley with 4-corner rope lead-out - Magnetic system pre-installed - Radio remote control - Optional with magnet beam or spreader

Stanje: novo, Leto izdelave: 2026, Sheet metal working machines of the RED type are the hallmark of Prod Masz. Every RED folding machine features a slim bending beam, regardless of its length, and thanks to side recesses, can bend on 3 sides. There are 2 handles on each side. An additional advantage is increased interior space for easier bending operations. Professional Folding Machine RED PLUS with Foot Pedal Technical Specifications: - Maximum working length: 3200 mm - Bending capacity: 0.8 mm (steel) - 1.2 mm (aluminum, copper, zinc) - Bending beam thickness: 15 mm - Bending angle: max. 160 degrees - Upper beam opening: 80 mm - Weight: approx. 700 kg - Rotary shear available for an additional €350 - Price includes front depth stops and rear frame - 3-side bending capability -> side cutouts - Recess: 60mm/45° Scribing template INCLUDED FREE :) Hjdpfx Ajcrcgqegijnk Price: €6,600.00 Delivery costs: €360.00 Delivery time: Weekly Payment: Cash on delivery or prepayment We look forward to hearing from you! Invoices are issued with 0% VAT as intra-community supply or plus 19% VAT.

Stanje: dober (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, Holtec Bruks long log infeed system with root reducer, comprising: Hnodjwxck Aopfx Agisk - Infeed cross conveyor with 6 chain strands, split drive. - Holtec hydraulic step feeder with split drive. - Bruks root reducer type RR 1200 for long logs – milling length 1200 mm. - Holtec heavy-duty conveyor belt for round timber. - Waste scraper conveyor and distribution screw.

Leto izdelave: 2022, stanje: novo, Stroj ZIM T1200 lahko proizvaja cevi s premerom 300 mm – 1200 mm in višino 500 mm – 2500 mm z enojnim, dvojnim ali trojnim stiskanjem. Cevi premera 150 mm in 200 mm je mogoče izdelati po posebnem naročilu. Stroji so lahko zasnovani kot polavtomatski ali popolnoma avtomatski, glede na zahteve kupca. Na avtomatskih strojih uporabljamo PLC mikroprocesorje blagovne znamke SIEMENS. Stroj ima bunker za malto in sistem za polnjenje malte. Izdelane cevi se lahko prevažajo do sušilnega prostora s transportnimi vozički ali viličarji. Proizvodnja poteka na proizvodnih paletah. Materiali do premera 800 mm se do sušilnice prevažajo s transportnimi vozički, cevi z večjim premerom od 800 mm pa z viličarjem. Za pospešitev proizvodnje lahko tudi cevi premera nad 300 mm v sušilnico prevažate z viličarjem. Hedpfxsibbiko Agijnk Stroj proizvaja z uporabo hidravličnega stiskanja in vibracij. Vibracijski sistem stroja je posebna zasnova inženirjev ZIM ter vključuje oljni hladilni sistem in posebno oljno enoto. Ta sistem je možno elektronsko upravljati. Posebno ojačano ohišje omogoča dolgo življenjsko dobo stroja in zanesljivo delovanje brez napak.

Stanje: dober (rabljeno), Board Sorting Line / Sorting System / Length Sorting Line Esterer Right Discharge 5 Sorting Bins Total Length 26 Meters Hodpfsgw Scqox Agisnk 1st Bin: 2 Meters 2nd Bin: 3 Meters 3rd Bin: 4 Meters 4th Bin: 5 Meters 5th Bin: >5 Meters Good condition – immediately available Location: Germany, near Landau an der Isar Please also see my other listings. I look forward to your inquiry.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Comparable to Durma, Baykal, Ermaksan, etc. Bending length: 3020 mm Pressing force: 320 t (also available in various other configurations!) Approach speed: 140 mm/s Bending speed: max. 10 mm/s Return speed: 130 mm/s Y-axis stroke: 400 mm Installation height: 650 mm Throat depth: 450 mm Clear gap between uprights: 2555 mm Machine length: 3785 mm Machine width: 2290 mm Width without support arms: 1740 mm Total height: 3100 mm Table height: 920 mm Motor power: 22 kW Oil tank capacity: 300 l Machine weight: 14450 kg (Data may vary depending on equipment) Standard equipment: - 3 CNC axes (Y1, Y2, X) - Double guided press beam, robust and precise - Robust backgauge, double guided - Double-guided backgauge fingers on linear rails - Movable front supports with height adjustment - Side and rear safety guards - Lower die adapter rail 60mm - Manual upper tool clamping system (Promecam system) - Foot switch with emergency stop - 380 V, 50-60 Hz, 3-phase - LED lighting Additional equipment: - Delem DA 66t CNC control - CNC controlled R-axis backgauge - CNC controlled crowning - Fiessler Akas 2M laser safety device - 2 additional backgauge fingers (total 4) - 1 set of upper and lower tools Hedpfx Asuf Nr Aogijnk - Other bending lengths and capacities available with appropriate accessories! -