Stroj za brizganje

Tederic DT400

Stanje: dober (rabljeno), Leto izdelave: 2023, obratovalne ure: 50 h, Merk Ferromatik Milacron GmbH Type eQ-280 - 2290 Bouwjaar 2023 Cedsw Ebpwjpfx Afdord Bedrijfsuren 50 uur Sluitkracht 2.800 kN Schroefdiameter 60 mm Injectiedruk 2.238 bar Maximaal schotvolume 905 cm3 Maximale afstand tussen de kolommen 710 x 660 mm Minimale matrijshoogte 250 mm Maximale afstand tussen de platen 1.400 mm Afmetingen (LxBxH) 8.500 x 2.100 x 2.500 mm Gewicht 18.400 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, WITTMANN BATTENFELD MacroPower 900/8800 Injection Moulding Machine Type: servo-hydraulic injection moulding machine Year of manufacture: 2017 Control system: UNILOG B8 INJECTION UNIT • Screw diameter: 105 mm • Screw stroke: 525 mm • L/D ratio: 22 • Theoretical shot volume: 4,545 cm³ • Injection pressure: 1,931 bar • Maximum screw speed: 167 rpm • Maximum plasticising capacity (PS): 151 g/s • Screw torque: 8,000 Nm • Nozzle stroke / nozzle contact force: 950 mm / 129 kN • Injection flow rate: 725 cm³/s • Injection flow rate with dual pump (option): 906 cm³/s • Open air injection rate with accumulator (option): 1,812 cm³/s • Cylinder heating power: 53.9 kW • Number of heating zones: 7 CLAMPING UNIT • Clamping force: 9,000 kN • Maximum opening stroke: 2,100 mm • Min./max. mould height: 500–1,000 mm • Platen dimensions: 1,720 × 1,550 mm • Tie bar spacing: 1,200 × 1,000 mm • Ejector stroke / force: 300 mm / 165 kN • Mould opening force: 300 kN GENERAL DATA • Pump power: 90 kW • Heating capacity: 53.9 kW • Oil tank capacity: 1,100 l Credpfx Aewzy N Usfdod • Machine dimensions (L × W × H): 10,100 × 3,400 × 2,700 mm • Weight: 35,200 kg

Stanje: rabljeno, Leto izdelave: 2015, Tehnične podrobnosti: Cjdew I E R Nopfx Afdord Sila zapiranja: 6600 kN Teža stroja pribl.: 45,5 t

Stanje: rabljeno, Leto izdelave: 2020, EASYMASTER EM560-SVP-2 Clamping force: 560 t Csdpfx Afsubu A Ssdjrd Injection volume: 2,544 cm³

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, obratovalne ure: 65.000 h, vpenjalna sila: 5.000 kN, premer vijaka: 90 mm, skupna višina: 2.355 mm, skupna masa: 14.000 kg, največja dolžina izdelka: 7.800 mm, This Engel DUO 4550/500 pico was manufactured in 2013. It features a clamping force of 5,000 kN, a screw diameter of 90 mm, and a maximum injection volume of 2,480 cm³. The machine dimensions are 7,800 x 2,405 x 2,355 mm, with a weight of 14,000 kg. It is currently in production, has approximately 65,000 operating hours, and is in excellent condition. Contact us for further information about this machine. • Maximum injection volume: 2,480 cm³ • Minimum mould height: 350 mm • Maximum mould height: 900 mm • Platen opening stroke: 1,300 mm • Platen dimensions (W x L): 1,270 x 1,260 mm • Tie bar spacing (H x V): 910 x 830 mm • Motor power: 83 kW • Heating capacity: 61.2 kW • Number of electrical connection pins: 32 • Nozzle tip radius: R35 • Centring ring diameter: 200 mm • Robot interface: Euromap 67 • Number of core pull units: 0 • Number of heating zones: 0 Credpjx Nr Uxefx Afded • Operating hours: approx. 65,000 h • Condition: Excellent • Condition: In production Additional equipment: • Robot (equipped)

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, Technical data: Maximum clamping force: 3,500 kN Maximum holding force: 3,850 kN Opening stroke: 725 mm Minimum mould installation height: 400 mm Maximum mould installation height: 900 mm (extended) Clamping platen (H x V): 1,168 x 1,144 mm Clear tie bar distance (width x height): 830 x 830 mm Maximum mould weight: 6,600 kg Maximum weight on movable clamping platen: 3,800 kg Maximum weight on fixed clamping platen: 5,100 kg Ejector stroke: 250 mm Increased ejector force: 100 kN Maximum ejector speed: 270 mm Screw diameter: 60 mm Injection pressure: 2,426 bar Crjdpfx Aoy Hmfysfdsd Maximum injection volume: 891 cm³ Maximum injection speed: 160 mm/s Maximum dosing stroke: 315 mm Maximum nozzle stroke: 520 mm Nozzle immersion depth: 20 mm Back pressure programmable over dosing stroke Installed cylinder heating: 23.1 kW Material hopper volume: 110 l Weight: approx. 21 t Accessories: Robot: Manufacturer: SEPRO ROBOTIQUE (France) Model: 5T35 2000/900/TE-1800 Year of manufacture: 2023 Stroke: 2,000 mm Speed: 3.5 m/s Horizontal demoulding stroke Y-axis: 900 mm Vertical demoulding stroke X-axis: 1,800 mm Robot console on fixed clamping platen Gripper function R1 (C) axis pneumatic 0° - 90°, including quick-change plate Weight: 583 kg MuCell integration (special option includes): • Plastification cylinder with pneumatic shut-off nozzle without mixing element and without non-return valve; • Interface (communication and emergency-stop interface); • Software including functional screens for MuCell control; • Adapted nozzle chamber guard; • Position-controlled high-speed screw (analogous to ZE388) Conveyor belt: Width: 870 mm Useful width: 800 mm Length: 3,500 mm Height: 880-1,220 mm Load capacity: 38 kg/m² Belt speed: 5.7 m/min Number of frames: 2 Clear tunnel height: 500 mm This injection moulding machine is fully equipped!! Condition: As new condition, only 5,290 operating hours

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, obratovalne ure: 60.244 h, vpenjalna sila: 6.500 kN, premer vijaka: 105 mm, skupna višina: 2.355 mm, skupna masa: 14.000 kg, največja dolžina izdelka: 7.800 mm, Ta Engel DUO 7050/650 pico je bil izdelan leta 2013. Ima zapiralno silo 6500 kN, maksimalno volumnino vbrizga 4160 cm³ in premer polža 105 mm. Stroj je opremljen z robotskim vmesnikom (Euromap 67) in je v zelo dobrem stanju. Če iščete visokokakovosten stroj za brizganje plastike, priporočamo Engel DUO 7050/650 pico, ki ga imamo na voljo za prodajo. Za dodatne informacije o tem stroju nas kontaktirajte. • Maksimalni vbrizgani volumen: 4160 cm³ Crodpfx Afjx Nr R Hedjd • Minimalna višina orodja: 450 mm • Maksimalna višina orodja: 950 mm • Hod odpiranja orodne plošče: 1400 mm • Dimenzije orodne plošče (Š × D): 1510 × 1440 mm • Razmak med stebri: 1100 × 960 mm • Moč motorja: 161 kW • Moč gretja: 73,9 kW • Število električnih priključkov: 32 • Polmer šobe za vbrizgavanje (na konici): R35 • Premer centrirnega obroča: 200 mm • Število jeder: 0 • Število grelnih con: 0 • Leto izdelave: 2013 • Delovne ure: pribl. 60.244 h • Stanje: zelo dobro • Stanje: v proizvodnji Dodatna oprema • Opremljen z robotom: da • Robotski vmesnik: Euromap 67

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, obratovalne ure: 55.201 h, Funkcionalnost: popolnoma funkcionalen, premer vijaka: 70 mm, Tehnične prednosti stroja: - visoka zmogljivost in natančnost, - popolnoma električni in energijsko varčen, Csdpexfbdxjfx Afdsrd - hitri, dinamični in zelo natančni premiki zahvaljujoč pettočkovnemu vzvodnemu vpenjalnemu sistemu z vodenjem plošče z nizkim trenjem na preciznih linearnih ležajih, - učinkovita vbrizgalna enota za izjemno hiter vbrizg, - popolna servisna dokumentacija in navodila za uporabo, - maksimalna energetska učinkovitost z dosledno uporabo servoelektričnega pogona z največjo učinkovitostjo.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, obratovalne ure: 43.500 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 194413, vpenjalna sila: 2.200 kN, premer vijaka: 55 mm, delovna prostornina: 475 cm³, tlak vbrizgavanja: 1.578 letvica, injekcijska masa: 440 g, minimalna višina orodja: 300 mm, hod izmetalca: 180 mm, odmični hod: 750 mm, skupna masa: 12.740 kg, ogrevalna zmogljivost: 13,4 kW (18,22 KM), Here we, as a dealer in injection moulding machines, offer the following well-maintained used injection moulding machine for sale. Of course, we are also interested in purchasing well-maintained injection moulding machines from year of manufacture 2010 onwards. We have been a wholesaler of used injection moulding machines for over 25 years. Important Update - Tax Advice and Benefit for Used Machines: From 01/07/2025, used machines can also be considered for a special depreciation allowance of 30% per year under tax law. In addition to the lower price compared to a new machine, you can benefit from the same depreciation amounts as with a new machine. Keyword: Growth booster, (§ 7 paragraph 2 EStG-E) Manufacturer: Engel Type: VC 750 / 220 Control: CC200 Year of manufacture: 2014 Machine No.: 194413 Operating hours: 43,500 h Injection unit Screw diameter: 55 mm Injection volume: 475 ccm Shot weight: 430 g Heating capacity: 13.4 kW Heating zones: 5 Nozzle stroke: 350 mm Crsdpfx Afeyc Ewxsdsd Injection pressure: 1179 bar – 1578 bar (boosted) Clamping unit Clamping force: 220 t / 2,200 kN Opening stroke: 757 mm Max. daylight: 1,050 mm Min. mould installation height: 300 mm Ejector stroke: 180 mm Ejector force: 80 kN Weight: 12,740 kg Extras: Core pull The machine is in very good condition and can be inspected under power. Any peripheral devices shown are NOT included in the offer! The machine is available immediately. Free loaded onto the buyer's truck or free delivery within Germany against reimbursement of freight costs. For your information regarding the machines we offer and our company: - We only sell machines owned by us, purchased from ongoing production, from our Hanover warehouse - All machines offered are inspected and tested prior to removal - We do NOT sell insolvency assets - we are NOT brokers trading on behalf of third parties. - All machines offered originate from successful companies where maintenance and care are self-evident - All offered machines can be inspected at our warehouse

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2021, obratovalne ure: 12.000 h, vpenjalna sila: 3.000 kN, premer vijaka: 50 mm, injekcijska masa: 375 g, skupna širina: 2.100 mm, skupna višina: 2.500 mm, skupna masa: 14.600 kg, največja dolžina izdelka: 7.000 mm, Electric injection moulding machine from 2021. This ZHAFIR ZERES III 3000 / 830 / B5 features a clamping force of 3,000 kN and a maximum mould opening stroke of 600 mm. The machine offers a platen size of 1040 x 1040 mm and a screw diameter of 50 mm. If you are looking for a high-quality injection moulding machine, consider the ZHAFIR ZERES III 3000 / 830 / B5, which we have for sale. Please contact us for further details. • Max. mould opening stroke: 600 mm • Min./Max. mould installation height: 280 / 650 mm • Max. distance between platens: 1,250 mm • Tie bar spacing (H x V): 730 x 730 mm • Min. mould size: 470 x 470 mm • Platen dimensions (H x V): 1,040 x 1,040 mm • Ejector stroke: 160 mm • Ejector force: 68.6 kN • Injection unit size: Euromap 120 • Screw L/D ratio: 20 • Theoretical shot volume: 412 cm³ • Shot weight (PS): 375 g • Injection pressure: 2,000 bar • Holding pressure: 1,600 bar • Injection speed: 160 mm/s • Injection rate (PS): 274 g/s • Screw speed: 320 rpm • Plasticising capacity: 46 g/s • Nozzle contact force: 85 kN • Cylinder heating capacity: 20.2 kW • Connected load: 36 kW / 60 A • Hydraulic pressure: 175 bar • Hydraulic flow rate: 90 l/min • Oil tank capacity: 135 l • Material hopper volume: 50 l Cedpfxoyrgq Ej Afdsrd • Control system: Sigmatek with 15" colour touchscreen • USB interfaces: 3 • Robot interface: Euromap 67 • Robot adapter: Euromap 18 • Mould data storage: up to 200 moulds • Production data collection: up to 100,000 cycles • Statistical process control system (SPC) • Central lubrication system • Automatic mould height adjustment • Compact 5-point toggle system • Hydraulic ejector system with vibration function • Parallel mould opening and ejector movement • Up to 3 hydraulic core pulls • Cooling water distribution system • PID temperature control system • Ceramic heating bands with thermocouples • Automatic venting function • Energy-saving cylinder insulation • Adjustable machine feet • Including installation tools • Operating hours: approx. 12,000