Preizkusna stiskalnica za orodja

TCS CANNON FINIX 300 T

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 61036721, vpenjalna sila: 6.500 kN, premer vijaka: 70 mm, razmak između stupova: 1.110 mm, delovna prostornina: 1.078 cm³, tlak vbrizgavanja: 1.877 letvica, injekcijska masa: 981 g, odmični hod: 3.200 mm, višina plošče: 1.540 mm, vrsta pogona: Hydraulisch, prosta razpetina: 3.200 mm, teža orodja: 2.200.000 g, Injection Moulding Machines Directly from the Manufacturer! As the manufacturer KraussMaffei, we offer you our certified and versatile stock machines: The hydromechanical two-platen clamping unit of the GXW machine sets new standards in terms of quality and productivity. With the sophisticated GuideX guide shoe, forces are optimally absorbed and the service life of your molds is increased. The innovative GearX locking system engages instantly and reliably. Powerful, user-friendly, and value-retaining. TECHNICAL DATA: KM 650 / 2000 / 2000 GXW G06 (Order 38618339) CONTROL SYSTEM • MC 6 with 24" TFT color display featuring multitouch functions CLAMPING UNIT • Clamping force kN 6500 • Max. mold opening force kN 455 • Clear width (h x v) mm 1110 x 960 • Mounting platen (h x v) mm 1540 x 1440 • Mold installation height, min. - max. mm 1550 (without center plate) • Max. opening stroke mm 3200 • Max. mold opening path mm 1650 Fjdpsw U N Ixofx Af Sjga • Max. mold weight kg 22000 INJECTION UNIT 1 SP2000 • Screw diameter/type mm 60 / Thermoplastic • Effective L/D ratio 23.3 • Injection pressure bar 2420 • Shot volume cm³ 792 • Shot weight at max. stroke for PS g 720 • Injection speed mm/s 140 • Injection flow cm³/s 396 • Screw drive/rotation speed 1/min 285 • Plasticizing flow g/s 72.2 • Nozzle contact force kN 82 INJECTION UNIT 2 SP2000 • Screw diameter/type mm 70 / Thermoplastic • Effective L/D ratio 20 • Injection pressure bar 1877 • Shot volume cm³ 1078 • Shot weight at max. stroke for PS g 981 • Injection speed mm/s 140 • Injection flow cm³/s 539 • Screw drive/rotation speed 1/min 285 • Plasticizing flow g/s 98.3 • Nozzle contact force kN 82 ELECTRICAL PARAMETERS Connected load kW 341 • Power supply V/Hz 400/50 (3 phases with neutral conductor) WEIGHT AND DIMENSIONS • Net weight t 43.5 • Length x width x height m 11.89 x 3.22 x 2.77 ADDITIONAL EQUIPMENT • Wear-resistant plasticizing unit • BluePower full insulation for plasticizing cylinder • Open nozzle • BluePower ServoDrive • Pneumatic valve: 1-fold (BWAP), 1-fold (FWAP) • Pneumatic cascade valves: 6-fold (BWAP), 6-fold (FWAP) • Hydraulic core pull: 2-fold (BWAP), 2-fold (FWAP) • Mold heating: 96-fold (3.5 kW) • Euromap interface for handling: E18 • Euromap interfaces (mainframe): E67, E77, E78, E63, E82.1 • Adaptive Process Control (APC+) • Graphic analysis package • Sliding table with turning unit, servo-driven • Vertical center plate • Parallel closing and opening pressing during the injection process with parallelism control between FWAP and center plate or BWAP and center plate • ColorForm interface: signal interface for integration of an RPM system • Electrical interface for HRS Flexflow system • Electrical interface and hydraulic valves for "1-K dummy operation" • Interface for connection of a CoMo-Kistler Injection Basic System with good/bad part separation The machine is located at our Parsdorf facility and is available at short notice. Additional options can be offered on request. We look forward to your inquiry.

Stanje: rabljeno, Leto izdelave: 2010, Pressure: 600 t Column width: 3,640 mm Fixed stroke: 350 mm Stroke rate: 11 - 44 strokes/min Shut height (stroke + ram adjustment at top): 1,550 mm Lateral column passage: 2,200 mm Table area: 3,600 x 2,500 mm Ram area: 3,600 x 2,500 mm Ram adjustment: 400 mm Strip width: 2,000 mm Material thickness: 0.6 - 2.5 mm Material cross-section: 1,600 x 2.5 mm² Coil weight: 35.0 t Number of straightening rolls: 13 Straightening roll diameter: 50 mm Blank cutting line (press, coil line, blank stacking system) Year of manufacture: 1993 - 2010, new Siemens S7 control system - Press: Schuler EBS 4-600-3.6-350, with infinitely adjustable articulated drive, flywheel brake, pneumatic clutch/brake combination, hydraulic overload protection in the ram, pneumatic ram balance, motorized ram adjustment, ram locking Sliding table (2x) without rails for the moving table Fgjdpfjvut Dyox Af Sea - Decoiler: Schleicher HE-355-2100, year 1994, with auxiliary drive, pressure device, movable - Coil loading car - Strip pull-off device Schleicher - Scrap shear - Straightening machine: make Schnutz, type RME 18/50/13-2000 TZ, year 1994, with infinitely adjustable drive, 30 intermediate rolls, 117 support rolls - Loop bridge - Roll feed unit: make Schleicher, type WV-SYS-A 160-2000, year 1994 Blank stacking system / destacker: NSM Magnettechnik Dismantled and stored – video at the owner prior to dismantling available

Stanje: rabljeno, Leto izdelave: 2020, Funkcionalnost: nepreverjeno, obratovalna hitrost: 110 mm/s, hitrost vzvratne vožnje: 180 mm/s, tabela razdalj do bata: 1.500 mm, skupna dolžina: 3.800 mm, skupna širina: 4.500 mm, skupna višina: 6.400 mm, We are offering a newly-built version of the machine shown here. The machine was commissioned in 2020 and can be inspected at the customer's site. Technical Data: Pressing force (T): 800 Opening force (T): 80 Motor power (kW): 55/75 + 55/75 Ram stroke: 1000 mm Rapid approach speed (mm/s): 110 Working speed (mm/s): 6 Return speed (mm/s): 180 Guide column diameter (mm): 250 Maximum pressure (bar): 250 Usable table area (mm): 3,500 x 2,000 Lower table displacement (mm): 2,000 Distance between columns (mm): 2,000 Open height (mm): 1,500 Total width (front) (mm): 3,800 Total width (side) (mm): 4,500 Overall height (mm): 6,400 Weight (kg): 134,600 The MV-800E/NC-SINCRO press is specially designed for the setup and testing of dies, molds, and punches. The four columns with 250 mm diameter, made from C45E steel, are manufactured specifically to withstand high stress. It features an optimized hydraulic system operating at up to 250 bar, ensuring long service life and reliability. The press complies with all essential safety and health requirements pursuant to CE standards. STRUCTURE AND TABLE • A frame capable of withstanding 600 T of concentrated force on 1/3 of its surface. • Lower table with T-slots. • Upper table with T-slots. • Usable table area: 3,000 x 2,000 mm. CYLINDER AND HYDRAULIC UNIT • Two double-acting hydraulic cylinders, each with 400 T capacity. • Single-stage hydraulic power unit with automatic shutoff of rapid approach speed and independent operation. Equipped with a decompression system and proportional pressure pre-fill valves. Digital potentiometers on the upper table control movement; an electronic synchro system compensates for off-center or unbalanced forces. • The press features a lateral pressure switch for optimal job-specific pressure adjustment. • Glycerine manometer with tonnage display. ELECTRICAL INSTALLATION AND SAFETY • Electrical installation for operation with 1 or 2 speeds for the main cylinder feed. • The press features both manual and automatic cycles (selectable via test mode switch): Fgodpfx Afowlrv Uo Sja • The manual cycle allows all press movements to be performed step-by-step at low speed. • The automatic cycle enables the press to execute a full production cycle. • Electrical safety system for the fall protection of the upper table. • Lower table with hydraulic withdrawal and physical stops. • The machine is equipped with a control panel featuring a touchscreen display for entering operating and calibration parameters. • Two 1,000 mm optical safety barriers (Class IV) are installed at the front and rear. • All Siemens electrical components are IP55-rated and manufactured according to current CE directives and regulations. • Electrical and hydraulic functions are redundant and self-monitored. Includes an additional safety block and self-checking devices for functionality and safety. Includes testing and certification of proper functionality and the safety distance of the light curtains. • Safety is further ensured by a laser and Class IV light curtain area protection system.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, Proizvajalec: ROVETTA Leto: 2003 Stanje: Rabljeno Številka zaloge: 0385 Potisk: 630 ton Število točk potiska: 4 ročične gredi Fedpfsxlh Rfex Af Sjga Hod drsnika: 300 mm Nastavitev drsnika: 250 mm Odmik orodja pri PMI: 950 mm Število udarcev/min: 15/65 Največja sprednja odprtina: 5.200 mm Dimenzije mize: 5.000 x 2.630 mm Dimenzije drsnika: 5.000 x 2.630 mm Moč glavnega motorja: 132 kW

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, skupna višina: 5.750 mm, razmak između stupova: 3.200 mm, vgradna višina: 6.800 mm, skupna širina: 2.890 mm, skupna dolžina: 8.500 mm, širina mize: 2.000 mm, dolžina mize: 3.000 mm, obremenitev mize: 70.000 kg, hitrost vzvratne vožnje: 50 mm/s, vpenjalna sila: 3.000 kN, Presse de touche Millutensil MIL 303 Présentation succincte - Année 2012 • Presse hydraulique type 303.011 • Force de pressage 300 t • Longueur de table utile : 3 000 mm • Largeur de table utile : 2 000 mm • Distance maximale entre colonnes (longueur) : 2 130 mm • Distance maximale entre colonnes (largeur) : 3 200 mm • Rainures en T dans les tables : 28 mm (DIN 650) • Force d’ouverture max : 800 kN - force de fermeture max : 3 000 kN - Rotation de la table supérieure : 100–180 degrés • Pression hydraulique réglable de 0 à 240 bar • Vitesse d’approche rapide : 65–80 mm/sec • Vitesse de travail : 8 mm/sec • Vitesse de retour : 35–50 mm/sec • Puissance du moteur principal supérieur : 30 kW • Puissance du moteur auxiliaire supérieur : 1,1 kW • Puissance totale de la presse : 31,1 kW Fodpfx Aeygkwxsf Sjga • Charge max sur table supérieure : 30 000 kg • Charge max sur table inférieure : 70 000 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 1993, Funkcionalnost: popolnoma funkcionalen, Proizvajalec: GIGANT Model: G2-1200/2 Leto: 1993 Stanje: Rabljeno Inventarna številka: 0375 Fgsdpfsx R U Idox Af Soa Tlačna sila: 1200 ton Število točk potiska: 2 Velikost delovne površine za orodja: 3.700 x 2.700 mm Velikost drsnika: 3.700 x 2.700 mm Hod drsnika: 1.000 mm Največja vertikalna odprtina: 1.590 mm Odpiranje orodja pri PMI: 610 mm Spodnji hod pritiskača pločevine: 400 mm Premični voziček: Prednji, prisoten