CNC obdelovalni center

TBI MVC 1890

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, obratovalne ure: 40.255 h, Funkcionalnost: popolnoma funkcionalen, For sale is a DMG DECKEL MAHO DMF 220 linear, a 5-axis universal machining center in travelling column design. The machine was built in 2008 and underwent a complete retrofit in 2022, featuring an upgrade to Siemens Sinumerik 840D Solution Line. Equipped with: - 5-axis simultaneous operation license - Siemens Sinamics drive technology - Siemens OP15 Black Operator Panel - MCP control panel and electronic handwheel Technical Specifications: Manufacturer: DMG DECKEL MAHO Model: DMF 220 linear Type: 5-axis universal machining center / travelling column machining center Year of manufacture: 2008 Control: Siemens Sinumerik 840D Solution Line Retrofit / Modernization: Siemens CNC & drive retrofit 2022 5-axis simultaneous operation: license available Serial number: 15115223244 Machine number: 2499093 Travel X: 2,200 mm Travel Y: 560 mm Travel Z: 720 mm Tool holder: SK 40 Table load capacity: 2,500 kg Main spindle speed range: 20 - 14,000 rpm Connected load: 80 kVA Max. rated current: 115 A Protection: 125 A Mains voltage: 400 V Frequency: 50 Hz Control voltage AC: 230 V Control voltage DC: 24 V Power-on hours: approx. 40,255 h Spindle / operating hours: approx. 13,082 h CNC / Drive technology: X axis: Siemens Sinamics 160 A, 2x SMC20 encoder module Y axis: Siemens Sinamics 50 A, 2x SMC20 encoder module Z axis: Siemens Sinamics 80 A, 2x SMC20 encoder module B axis: Siemens Sinamics 25 A, 2x SMC20 encoder module A axis: Siemens Sinamics 25 A, 2x SMC20 encoder module Spindle axis: Siemens Sinamics 26 kW, 2x SMC20 encoder module Operator panel: Siemens OP15 Black Operator Panel MCP keypad: Siemens Fpsdpfx Asyuzg Hsprjk Electronic handwheel: Siemens Magazine technology: Magazine A: 400 W servo drive, 400 W servo motor, 10 m power cable, 10 m encoder cable Magazine B: 400 W servo drive, 400 W servo motor, 10 m power cable, 10 m encoder cable Magazine C: 400 W servo drive, 400 W servo motor, 10 m power cable, 10 m encoder cable Software / Licenses: - 5-axis simultaneous operation license - Axis licenses - Operator software license Equipment: - Integrated rotary table / swiveling bridge structure - Paper tape filter system - Coolant / filter unit - Electrical cabinet - Full enclosure - Work area lighting - Siemens operator console Condition: - Machine is in well-maintained condition - Upgraded Siemens control and drive technology - 5-axis simultaneous operation available

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, X-travel 2,500 mm Y-travel 3,000 mm Fedpfjzak Hgsx Aprjpk Z-travel 1,250 mm Control HEIDENHAIN iTNC530 Spindle speeds – stepless up to 22,000 rpm C-axis ±300° Swiveling head ±110° Tool holder HSK 63 A Tool changer with 50 positions Total power requirement 130 kW Machine weight approx. 53.5 t Installation dimensions approx. 7.6 x 7.3 x 5.7 m This ZIMMERMANN FZ33c is immediately available and in good condition. – NEW spindle installed 6 months ago Description: Technical specifications of the system and working areas X-axis 2,500 mm Y-axis 3,000 mm Z-axis 1,250 mm A-axis ±110° C-axis ±300° Including vibration sensor Including bearing temperature sensor Including rotary feedthrough for internal high-pressure coolant (IKZ) 5-axis path control: Heidenhain iTNC 530/manual pulse generator HR520, 15" TFT color display Extraction system LTA Industrial Air Cleaning Machine enclosure roofing Tool changer 50 positions, chain magazine, rear of the machine Chip conveyor, discharge 60° left, front end Probe not included!!! Blum laser tool measurement "Control NT-Micro" Clamping table Length x Width x Height: 2,500 x 3,250 x 400 mm Table load 8,000 kg/m² (max. 16,000 kg) T-slots, longitudinal 18H12 T-slot spacing 250 mm Dimensions and Weights Required space (without peripherals): approx. 7,600 x 7,300 x 5,650 mm Total weight approx. 53,500 kg Electrical specifications Voltage (three-phase): 400 V Frequency: 50 Hz Compressed air connection (on-site) Required pressure: 6 bar Average air consumption: approx. 15 m³/h (depending on machine equipment) Linear axes drives Rapid traverse X, Y, Z axes: 60 m/min Axis acceleration X, Y, Z axes: up to 5 m/s² Rotary axes drives – VH30 Rapid traverse A, C axes: 360 °/s Axis acceleration A, C axes: 700 °/s² Resolution A, C axes: 0.0001 Linear axes accuracy – according to VDI / DGQ 3441 Positioning accuracy X-axis P = 0.026 mm Y-axis P = 0.028 mm Z-axis P = 0.020 mm Repeatability X-axis Ps = 0.015 mm Y-axis Ps = 0.016 mm Z-axis Ps = 0.010 mm Measurement system resolution (interpolated) A, C axes: 0.0001° Rotary axes accuracy – VH30 Positioning accuracy A, C axes P = 12" = 0.0033° Repeatability A, C axes Ps = 8" = 0.0022° Milling head VH30 2-axis milling head: VH30, Milling spindle Siemens Weiss Spindle power S1 (100% duty cycle): 60kW Spindle speed: 22,000 rpm, 95 Nm, HSK-A63 External fork head dimensions L x W approx. 500 x 600 mm Nominal torque rotary axes closed-loop A: min. 1,200 Nm C: min. 1,047 Nm Clamped A and C axes: 3,000 Nm (Grease-lubricated for life with automatic re-lubrication system) Swivel axis – spindle nose: 326 mm Tool holder: HSK 63 A Tool clamping: spring clamp Tool release: hydraulic Admissible tool weight: 4.5 kg (manufacturer specification) Coolant supply external and internal Coolant/lubricant delivery (emulsion) at the face of the milling spindle with band filter system Capacity 1,500 l Pump 1: 40 l/min at 20 bar Pump 2: 20 l/min at 40 bar Blow air at the face of the milling spindle

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, hitrost vretena (min.): 16.000 obr/min, moč vretenovega motorja: 5 W, število vreten: 3, število mest v zalogovniku orodij: 21, vhodna napetost: 380 V, 4 kosi CNC Brother mod. S500X1/S700X1. Letnik proizvodnje 2014 1 KOS S 3 OSMI 1 KOS S 4 OSMI S HIDRAVLIČNO POSTAJO BREZ NAPRAVE ZA FILTRACIJO PAR 1 KOS S 4 OSMI S HIDRAVLIČNO POSTAJO Fedsyap R Dopfx Aprspk Z NAPRAVO ZA FILTRACIJO PAR

Leto izdelave: 2004, stanje: rabljeno, Premer palice: 6 - 120 mm Dolžine palic: 100 - 1.600 mm Fsdpfx Asyhhrijprepk Največja masa palice: 63 kg Podajalna dolžina: 1.000 mm Vzdolžni pomik: 600 mm Teža stroja: pribl. 600 kg Potreben prostor: pribl. 2,2 x 1,5 x 1,5 m Trenutni prikaz delovnih ur: 4.867 ur

Stanje: dober (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 750 mm, premer struženja: 590 mm, izvrtina vretena: 78 mm, največja hitrost vretena: 3.000 obr/min, Oprema: dokumentacija / priročnik, Obdelovalna dolžina: 750 mm Obdelovalni premer: 590 mm nad posteljo / 375 mm nad prečnim suportom Obrati vretena: 25 - 3.000 obr/min Premer vretena: 78 mm Revolver: 10 mest Krmiljenje: Siemens 810D Shopmill Opremljeno z: - Dvojno nožno stikalo - Transporter za ostružke - Navodila za uporabo Fpedpexmvzuefx Aprek Država izvora: J. Koreja Moč motorja: 25 kW Teža stroja: 6.000 kg Mere stroja (D x Š x V): 300 x 180 x 190 cm

Stanje: rabljeno, Leto izdelave: 1998, Dolžina struženja 322 mm Največji premer vrtenja nad ležišči 510 mm Največji premer struženja 279 mm Vrtljaji vretena 60–6000 min⁻¹ Vretenina izvrtina 53 mm Revolver z 12 postajami Krmiljenje: Fanuc 21 T Opremljen z: Podajalnik palic Hatec Rapid Load 12 Konjiček Razni nosilci orodij in vpenjalne klešče Fpodpfxsx N A N Hj Aprek Samocentrirna glava

Stanje: dober (rabljeno), potovalna razdalja osi X: 3.500 mm, pomik osi Y: 2.000 mm, pomik po osi Z: 800 mm, obremenitev mize: 12.000 kg, skupna višina: 3.900 mm, skupna dolžina: 7.200 mm, skupna širina: 5.200 mm, dolžina mize: 1.800 mm, širina mize: 1.600 mm, hitrost pomika os X: 8.000 m/min, hitrost podajanja osi Y: 8.000 m/min, hitrost podajanja os Z: 8.000 m/min, največja hitrost vrtenja: 2.000 obr/min, Namizna vrtalno-rezkalna naprava TOS VARNSDORF - WHN 13 CNC MACH-ID 9612 Proizvajalec: TOS VARNSDORF Tip: WHN 13 CNC Krmiljenje: Heidenhain TNC415 X-os: 3500 mm Y-os: 2000 mm Z-os: 800 mm W-os: 1000 mm Dolžina mize: 1800 mm Širina mize: 1600 mm Obremenitev mize: 12 t Hitrost vrtenja: 2000 obr./min Moč: 37 kW Fpjdpfx Ajy H Dahjprek Vpenjanje orodja: ISO50 ISO/Bt/Mk Pomik X-os: 8000 mm/min Pomik Y-os: 8000 mm/min Pomik Z-os: 8000 mm/min Pomik W-os: 8000 mm/min Dolžina: 7200 mm Širina: 5200 mm Višina: 3900 mm Teža: 34.500 kg Prosimo, upoštevajte: Podatki na tej strani so bili po naših najboljših močeh pridobljeni od nas in kjer je mogoče, od proizvajalca. Informacije so podane v dobri veri, vendar za točnost ne moremo jamčiti. Zato ne predstavljajo nobenih zagotovil ali pogodbenih pogojev. Priporočamo, da pred nakupom preverite vse pomembne podrobnosti.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1997, Romunski stružnica SARO SPS 1250x9000 Proizvajalec: Saro Targoviste Leto izdelave: 1997 Fpsdsy Icbaspfx Aprjk Premer vpenjalne glave: 1250 mm Največji premer obdelave nad ležiščem: 1250 mm Premer vretena: 250 mm Razdalja med konicama: 9000 mm Največji premer obdelave nad prečnim suportom: 920 mm Največja teža obdelovanca med konicama: 15.000 kg Brusni nastavek na voljo! Video stroja v delovanju na voljo Teža okoli 25 ton

Stanje: dober (rabljeno), Leto izdelave: 1995, premer zgornjega valja: 330 mm, najv. debelina pločevine: 23 mm, Manufacturer: IMCAR Model: SIHR Year of manufacture: 1995 - Extended end for profile bending rolls (Pipe & T-Angle) - Centralized lubrication - Digital readout for side roll position - Fully hydraulic machine - Hydraulic drop end - Hardened rolls Specifications Metric / US Standard Roll width: 3100 mm Plate thickness at 3x top roll diameter: 18 mm Plate thickness at 5x top roll diameter: 23 mm Pre-bending thickness: 20 mm Top roll diameter: 330 mm Side roll diameter: 310 mm Fsdpfowpku Djx Aprepk Number of rolls: 3 Bending speed: 0 - 5 Side roll adjustment: 200 mm/min Number of driven rolls: 2 Power: 15 kW Dimensions (approximate) Length: 5250 mm Width: 1700 mm Height: 1700 mm Weight: 11,900 kg Please note: The information on this page is provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Therefore, it does not constitute representation or terms of contract. We strongly recommend verifying all critical details.

Stanje: dober (rabljeno), Leto izdelave: 2003, potovalna razdalja osi X: 1.060 mm, pomik osi Y: 710 mm, pomik po osi Z: 710 mm, hitrost pomika os X: 15.000 m/min, hitrost podajanja osi Y: 15.000 m/min, hitrost podajanja os Z: 15.000 m/min, skupna višina: 2.800 mm, skupna dolžina: 3.200 mm, skupna širina: 2.900 mm, širina mize: 800 mm, dolžina mize: 1.500 mm, obremenitev mize: 550 kg, premer vrtljive mize: 800 mm, moč vretenovega motorja: 20.000 W, Chip conveyor 3D probe Paper band filtration system Internal coolant supply 15 bar Machine under power X-axis travel: 1060 mm Y-axis travel: 710 mm Z-axis travel: 710 mm A-axis: 360000° B-axis: -30° to +120° Table length: 1500 mm Table width: 800 mm Table load capacity: 550 kg Table diameter Ø: 800 mm Feed rate X-axis: 15000 mm/min Feed rate Y-axis: 15000 mm/min Feed rate Z-axis: 15000 mm/min Tool holder: ISO/Bt/MK 40 Spindle power: 20 kW Spindle speed: 12000 rpm Tool changer: 32 positions ICS (internal coolant supply): 15 bar Number of controlled axes: 5 Chip conveyor: Yes Fsdpfoym Sdyjx Aprspk Cooling system: Yes Length: 3200 mm Width: 2900 mm Height: 2800 mm Weight: 9500 kg Please note: The information on this page has been compiled to the best of our knowledge and, where possible, obtained from the manufacturer. The information is provided in good faith, but accuracy cannot be guaranteed. Accordingly, these do not constitute representations or contractual terms. We recommend verifying all critical details.