Stroj za brizganje

Taizhou XPM-15

Stanje: rabljeno, Leto izdelave: 2009, Funkcionalnost: nepreverjeno, številka stroja/vozila: 73136, potovalna razdalja osi X: 1.350 mm, pomik osi Y: 1.150 mm, pomik po osi Z: 720 mm, nazivna (navidezna) moč: 64 kVA, proizvajalec krmilnikov: Heidenhain, model krmilnika: iTNC 530, skupna višina: 3.150 mm, skupna dolžina: 5.605 mm, skupna širina: 4.290 mm, skupna masa: 12.600 kg, hitrost vretena (min.): 15.000 obr/min, delovne ure vretena: 21.786 h, število mest v zalogovniku orodij: 46, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, +GF+ MIKRON HPM 1350U – 5-Axis Machining Center (Year of Manufacture 2009) Used 5-axis milling machine MIKRON HPM 1350U from 2009. The machine is in operational condition and comes from ongoing production. Equipped with Heidenhain iTNC 530 control, rotary table Ø 1100 mm, 46-position tool magazine, and Renishaw OMP60 touch probe. Operating Hours (read): Control on: approx. 112,194 h Machine on: approx. 72,272 h Spindle on: approx. 21,786 h Programs: approx. 21,654 h Condition: Used machine with typical signs of wear, technically functional. Inspection under power possible by arrangement. Working Areas Travel paths: X-axis: 1350 mm Y-axis: 1150 mm Z-axis: 720 mm (vertical spindle) / 895 mm (horizontal spindle) Ncodpfxsx Eh Iqe Abbsl Spindle Standard spindle 15,000 rpm Speed range: 0–15,000 rpm Acceleration time to max. speed: approx. 2.5 s Power: 38 kW (S6 = 40% duty cycle, TS = 2 min) Torque: 193 Nm (S6 = 40% duty cycle) Tool holder: HSK-A63 (DIN 69063-1, option ISO-B40/DIN 69871) Max. tool diameter: 130 mm (fully equipped) Bearing: Ceramic hybrid Ø 70 / Cronidur-St Lubrication: Lifetime-lubricated Cooling: Water with corrosion protection Feed Drives Feed motors: AC Rapid traverse/Working feed: 32 m/min (20% duty cycle) 10 m/min (100% duty cycle) max. 15 m/min (40% duty cycle per hour) Position measuring systems X/Y/Z: Linear scales (direct) Rotary Table Clamping surface: Ø 1100 × 1000 mm, flattened on the side Table load: 1600 kg T-slots: 8 × 18H12 + 1 alignment slot 18H7 (100 mm spacing) Location bore: Ø 50 H6 Clamping torque: 8000 Nm Max. moment of inertia: 75 kg·m² Table stroke above floor: 1120 mm Table drive: Torque motor, direct Drive torque: 1600 Nm (40% duty cycle, 2 min) Swivel Axis (A-axis) NC swivel range: +16° to −120° Measuring system: direct, absolute Clamping principle: hydraulic, stepless Max. swivel speed: 4000 °/min Max. working swivel torque: 600 Nm (S6 40%) Swivel time 0° → 90°: 0.9 s Tool Magazine / Changer 46-position magazine (installed as per documentation) Magazine positions: 46 Tool holder: HSK-A63 (DIN 69063-1), option ISO-B40 Max. tool diameter: 80 mm fully equipped 130 mm partially equipped Max. tool length: 300 mm Max. tool weight: 8 kg Magazine loading: 200 kg Chip-to-chip time (vertical): 11 s Coolant / Chip Removal External coolant supply (AKZ): 40 l/min, 2.5 bar Internal coolant supply (IKZ) Electrical Data: Installed nominal power: 75 kW Power connection: 58 kW Connection rating: 64 kVA Control voltage: 24 V DC Operating voltage: 3 × 400 V, 50 Hz Protection class: IP54 Dimensions & Weight Machine weight: approx. 12,600 kg (without accessories) Space requirement (L × W × H): 5605 × 4290 × 3150 mm

Stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 600 mm, pomik osi Y: 410 mm, pomik po osi Z: 450 mm, model krmilnika: Heidenhain, največja hitrost vrtenja: 12.000 obr/min, Vertical machining center YCM NXV600A – demonstration machine – Control: Heidenhain TNC620 Spindle: 12,000 rpm, SK40, 17 kW Coolant system with 20 bar through-spindle coolant (IKZ) Electronic handwheel Tool changer: 24 stations Ncjdpfxovvuh Ao Abbol Chip conveyor The machine is located at our facility in Soltau and can be inspected under power at any time!

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, General Tool Magazine: 2x chain-type magazines with 32 stations each Rapid Traverse X/Y/Z: 48 m/min Travel Range X/Y/Z: 800/900/620 mm Spindle Technology: Direct drive Speed: 15,000 rpm Tool Holder: HSK-A63 NC Rotary Table Technology: Swivel rotary table with torque drive, manufacturer Kessler A axis: +/- 120° C axis: 360° Nodpeur Ng Ujfx Abbecl Clamping Surface: ø800 mm Table Load (max.): 1,000 kg Workpiece Dimensions (max.): ø800 x 500 mm Equipment Position Measuring System: Direct (glass scales) on all axes Chip Management: Chip conveyor Coolant Management: Through-spindle coolant system with filter and high pressure, 18 bar Workpiece Measurement: Probe, Heidenhain TS 740 Tool Measurement: Laser, BLUM Setup Mode: Electronic handwheel Additional Equipment: Spindle chiller

Stanje: dober (rabljeno), Leto izdelave: 2001, Gildemeister NEF 520 CNC Lathe TECHNICAL DATA Working Area Swing diameter over bed: 500 mm Swing diameter over cross slide: 290 mm Chuck diameter: 250 mm Cross slide travel: 260 mm Distance between centers: 850 / 1350 mm Main Spindle Spindle nose: DIN 55027 Size: 8 Spindle bore diameter: 70 mm Spindle taper: metric 80 Spindle diameter at front bearing: 120 mm Main Drive AC Drive power: 12 kW Max. torque: 920 Nm Speed range: 10 – 3000 rpm Gear stages: 2 Selectable speeds: Stepless Nedpfswftviex Abbscl Feed Drive X-axis feed force: 5000 N Z-axis feed force: 10000 N X-axis rapid traverse: 8 m/min Z-axis rapid traverse: 10 m/min Tool Holder Multifix; Size: C Tailstock Quill diameter: 80 mm Quill stroke: 180 mm Quill taper: MT5 Dimensions L x W x H: 2900 x 1953 x 1825 mm Weight: 2700 kg SCOPE OF DELIVERY Including (not limited to): - Gildemeister lathe - SMW Autoblok Hi-Grip high-precision chuck - Chuck jaws - Multifix tool post - Complete operating documentation - Full scope of supply as per photo documentation We accept no liability for the correctness, completeness or currentness of the information provided.

Stanje: dober (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, Proizvajalec: HABERMEHL Anlagenbau GmbH Naslov: Hauptstr.1, 35510 Butzbach-Ebersgöns, Nemčija Tip: EH 400/1 Serijska številka: 901 Letnik: 2004 Napetost / frekvenca: 400 V / 50 Hz Nazivna moč: 3 kW CE-certifikat: Da 🛠️ Opis naprave Industrijski drobilnik oz. granulator (shredder/granulator). Značilne lastnosti na fotografijah: Sistem z rotacijskimi noži (drobilna enota) na 2-mm gredi 3 kW SEW motor z reduktorjem 8 mm sito (na situ označeno: „8 mm Sieb“) – določa velikost izhodnih delcev Premična, transportna konstrukcija Posoda za izpust materiala in spodnja motorizacija Takšni stroji se običajno uporabljajo za drobljenje naslednjih materialov: Plastika Guma Ncsdpfxjw Niuhe Abbsl Les Lahki kovinski ostružki Elektronski odpadki 📝 Tehnične informacije, ki jih lahko zahtevate Za dodatne informacije se lahko pri dobavitelju ali proizvajalcu pozanimate za naslednje podrobnosti:

Stanje: kot nova (razstavni stroj), Leto izdelave: 2023, Control: Heidenhain TNC 640 Working Area Travel X: 1,020 mm Travel Y: 520 mm Travel Z: 610 mm Clamping surface (L x W): 1,160 x 520 mm Table load: 750 kg Spindle Speed: 15,000 rpm direct Tool holder: SK40 (BigPlus) DIN69872 General Tool changer: 30-position (double gripper) Machine bed: High-strength Meehanite cast Repeatability: 0.008 mm Chip management: Chip conveyor incl. chip flushing in the working area Coolant management: Internal coolant supply (IKZ 30 bar) Cooling air: Programmable external cooling Ncodpfxet Dizvs Abbel Temperature management: Automatic spindle cooler Jog support: Electronic handwheel Workpiece and working area cleaning: Flush and air gun Coolant cleaning: Oil skimmer Network connection: Ethernet interface

Stanje: dober (rabljeno), Leto izdelave: 2014, Technische Daten sind auf den Fotos ersichtlich. Die per Hand gezeigten Teile sind nicht im Lieferumfang enthalten. Ncodpfx Ajufp Svsbbol

Stanje: dober (rabljeno), Leto izdelave: 2007, obratovalne ure: 24.210 h, This injection moulding machine from Dr. Boy is located at Plastima Used Machinery in the machine storage facility. The machine is from 2007 and has relatively low operating hours for its age. – Brand: Dr. Boy – Model: 55M – Year of manufacture: 2007 – Screw diameter: 32 mm – Shot volume: 96.5 cm³ – Clamping force: 55T – Operating hours: 24,210 Ncsdpjtpf N Usfx Abbol

Leto izdelave: 1987, Stanje: pripravljen za uporabo (rabljen), Zapiralna sila: 220kN, minimalna višina orodja: 200mm, maksimalni hod odpiranja: 200mm, maksimalna razdalja med ploščami: 400mm, hod izmetalca: 80mm, dimenzije stroja (D/Š/V): cca 2600mm/800mm/1600mm, teža: cca 760kg. Ogled na lokaciji je možen. Nodjw R Dg Ujpfx Abbocl

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 1.000 mm, pomik osi Y: 600 mm, pomik po osi Z: 600 mm, hitro pomikanje X-os: 36 m/min, hitri pomik os Y: 36 m/min, hitri pomik na osi Z: 36 m/min, hitrost pomika os X: 15 m/min, hitrost podajanja osi Y: 15 m/min, hitrost podajanja os Z: 15 m/min, skupna višina: 2.700 mm, skupna dolžina: 2.800 mm, skupna širina: 3.550 mm, širina mize: 600 mm, dolžina mize: 1.200 mm, obremenitev mize: 800 kg, skupna masa: 7.500 kg, največja hitrost vretena: 8.000 obr/min, nos vretena: SK40, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, V10 Vertical Precision Machining Center in Cross Table Design Machine Specifications: Control: FANUC 0i-MF Travel Ranges: Ncjdpfx Absvtz Dxsbjl X-axis travel: 1,000 mm Y-axis travel: 600 mm Z-axis travel: 600 mm Spindle nose to table surface: 150 – 750 mm Precision: Positioning accuracy: 0.008 / 0.006 / 0.006 mm (X/Y/Z) Repeatability: 0.005 / 0.004 / 0.004 mm (X/Y/Z) Table: Table size: 1,200 x 600 mm Max. load: 800 kg T-slot size: 5 x 18 x 100 mm Spindle: Drive type: Belt-driven Max. speed: 8,000 rpm Power: 7.5 / 11 kW Tool holder: SK40 Pull stud: MAS P40T-I (45°) Feed Speeds: Rapid traverse (X/Y/Z): 36 / 36 / 36 m/min Cutting feed rate (X/Y/Z): 15 / 15 / 15 m/min Tool Magazine: Capacity: 24 stations Type: SK40 Max. tool diameter: 80 mm Max. tool diameter (with empty adjacent slot): 150 mm Max. tool length: 300 mm Max. tool weight: 8 kg Tool to tool indexing: 2.5 sec Power supply: 30 kVA Machine weight: 6.5 t Dimensions: 2,800 x 3,550 x 2,650 mm Standard Configuration: Control: Mitsubishi M80VB 8,000 rpm belt-driven spindle 24-position tool changer Pneumatic and hydraulic lubrication system Coolant system Integrated coolant tank with chip conveyor Fully enclosed guarding Air gun 3-color signal tower Standard accessories Chip cart CE compliant Options: SIEMENS 828D FANUC 0i 10,000 rpm belt-driven spindle 12,000 rpm direct-drive spindle Spindle oil chiller NC rotary table (4th axis) Tool measurement Safety shutter for tool magazine Water gun Oil separator Chip conveyor with chip cart Oil extraction unit (pre-installation) Separate water tank for aluminum chips Cabinet air conditioner Glass scales (not for V6 series)