Stožčasti drobilnik

Svedala H-36

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Steinert NES 125 220 E 5009 na prodaj Proizvajalec: Steinert Tip: NES 125 220 E 5009 Širina traku: 1.500 mm (novi trak) Z novo krmilno enoto. Bsdoxb S Exjpfx Apnodi Prenovljeno, uravnoteženo, peskano in prebarvano.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: D91402707010001/2013, skupna masa: 1.500 kg, Moteur électrique à vendre Description conformément à la plaque signalétique (voir photos) Bdodpfx Aowittpjpnoi Vente uniquement dans les États membres de l'UE ! Pas de vente privée. Le moteur électrique peut être inspecté sur rendez-vous. Toute garantie est exclue. Nous déclinons toute responsabilité quant à l'exactitude des données techniques et de l'année de fabrication, à l'exhaustivité des accessoires et des équipements, ainsi qu'au respect de toutes les exigences de sécurité et de protection de l'environnement mentionnées dans les réglementations relatives à la prévention des accidents.

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1985, Rabljeni čeljustni drobilnik Proizvajalec: Skoda Tip: 1017 / 1200 x 900 Vhodna odprtina: 1000 x 700 mm Izhodna odprtina: 130-250 mm Električni motor: 130 kW Dovajalni zalogovnik Transportni trak s prekladalnim zalogovnikom Bdedeyluqyjpfx Apnoi

Stanje: pripravljen za uporabo (rabljen), HSM V-Press 860 baler, year 2008-2009, price: €5,800 Pressing force: 54 kN Specific pressing force: 63.46 N/cm² Drive power: 7.5 kW Cycle time: 25 s Loading height: 1,110 mm Feeding opening (W x H): 1,195 x 650 mm Bale size (L x W x H): 1,200 x 780 x 1,200 mm Bale weight: 480 kg Machine dimensions (W x D x H): 1,797 x 1,247 x 2,985 mm Machine weight: 2,008 kg Binding material: wire Pressable materials: film, mixed paper, cardboard, die cuttings, textiles, Big Bags, EPS Bdedera Rbgepfx Apnsi HSM V-Press 860 plus baler, year 2013-2015, price: €8,000 HSM V-Press 860 L baler, year 2015, price: €9,000 HSM V-Press 860 plus baler, year 2019, price: €9,000 HSM V-Press 860 plus baler, year 2024, price: €10,000 HSM V-Press 860 new, ex-display, year 2020, price: €13,000 4-fold wire bale tying Bale dimensions (L x W x H) mm: 1,200 x 800 x 1,000–1,200 Bale weight: approx. 500 kg Technical data (L x W x H): 1,213 x 1,824 x 2,987 mm Feed opening: 1,200 x 565 mm Cycle (seconds): 35 Pressing force (T): 54 Power supply: 400 V (three-phase) HSM V-Press 860 plus B baler, year 2020, price: €14,000 Pressing force: 594 kN Voltage/Frequency: 400 V / 50 Hz Power: 4 kW Feed opening (W x H): 1,500 x 651 mm Bale size (L x W x H): 1,500 x 780 x 1,200 mm Bale weight: 550 kg Loading method: manual Machine dimensions (W x D x H): 2,099 x 1,245 x 2,985 mm Machine weight: 2,336 kg Binding material: wire Pressable materials: film, cardboard Idle cycle time: 25 s

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Cantilever rack in painted finish (RAL 7016 Anthracite): Scope of delivery: 4 rack uprights, height 4,200 mm with 1,200 mm usable depth base section 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright centre distance (4,000 mm rack length) Fastening material (bolts, nuts, and washers) - (*Delivery or pickup in approx. 1 - 2 weeks) - (*No paint damage!) - (*No damaged components!) - (*Spare parts available for reordering and extension anytime) - (*Offer available in larger quantities: Approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed description: - Robust steel construction made from IPE sections (bolt-together system) - Surface painted in RAL 7016 (Anthracite) - Rack height 4,200 mm - Load capacity per upright 2,200 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 740 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Includes fastening materials (excluding floor anchors) - Supplied with assembly instructions and load plaques C4 according to DIN standard - Expert advice by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance delivery notification. The materials are carefully packed for easy unloading. Delivery is possible approx. 1 - 2 weeks after order receipt. For outdoor installation, load capacities are reduced according to wind and snow load. The subfloor must be concrete, flat, suitable for doweling, and able to bear the imposed loads. Floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. Bdodjmhhypopfx Apnji The rack uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to German trade association recommendations, the rack uprights should have at least a 500 mm projection above the top storage level.

Leto izdelave: 1999, stanje: pripravljen za uporabo (rabljen), AMUT EA90/24 SINGLE SCREW EXTRUDER Type: RALDI Screw for PVC, oil-cooled Application: PVC, PE or PP Year of manufacture: 1999 Operating hours: 48,000 Drive: DC 36.3 kW 11 digital heating controllers Melt pressure and melt temperature display SIEMENS SIMATIC display Operating hours: 48,119 h Draw-off control possible via the extruder Condition: Good, ready for operation The extruder is my property Bjdpfx Ajk Nn Dzjpnedi Sachal Extrusion Machines D-26345 Bockhorn-Grabstede Bahnhofstraße 6 Germany

Leto izdelave: 2026, stanje: novo, 1 piece brand new mobile residual concrete recycling plant RECYCLING PLANT for processing surplus fresh concrete MREC 15 – MOBILE VERSION Manufacturer: RSM Model: MREC 15 Year of manufacture: brand new Washing capacity approx. 15 m³/h WAM washing screw Separation cut: 0.3 mm - 1 piece feed hopper - 1 piece elevated tank (25 m³) - 1 piece intermediate tank (2 m³) - 1 piece dirty water agitator with console - 2 pieces submersible sludge pumps - 1 piece submersible pump - 1 piece control system for residual concrete recycling plant - 1 piece washing arch - etc. Final coating: RAL 9002 Separator zinc-plated. Bodpofgrfiofx Apnedi Price = list price Send us your enquiry and we will be happy to make you a tailor-made offer (of course including all possible discounts) Delivery time: available at short notice Offers and prices are strictly net ex works Subject to prior sale, Errors and/or misrepresentations excepted,

Stanje: zelo dobro (rabljeno), Leto izdelave: 1995, številka stroja/vozila: 47070001, For the separation and extraction of light and interfering materials Drum diameter x width: 1,400 x 1,200 mm Bdsdpfx Aeqi Eh Hopnsi Vibrating feed chute Blower with a capacity of 7,000 m³/h Including steel framework, platform, railings, etc.

Leto izdelave: 2001, stanje: dober (rabljeno), HSM-500.1_VL BALER PAPER BALER FILM BALER Immediately operational, good CONDITION Used & good / see photos Model: HSM 500.1 VL Machine No.: 6135.244.P Serial No.: 220109689 Press force: 50 tons Voltage: 400V; Frequency: 50 Hz Power: 7.5 kW Current: 15.5 A Compression force: 6 tons Year of manufacture: 2001 Additional balers available in our other listings Item used and in good condition / roughly cleaned (Plug in and ready to operate) Dimensions: On request!! Additional photos show potential usage options. All items visible in the photos are also available from us. Price quoted is net per unit Ex works 47441 Moers Current stock: 1 unit Inspection is expressly offered. More machinery in stock See photos or enquire by phone General information: We offer items acquired from various liquidations, described to the best of our ability, and provide clear photos. Further details about the item cannot be provided. We offer the opportunity for viewing by appointment on Tuesdays and Thursdays between 9 am and 4 pm. If needed, the item can be taken immediately. We can only respond to enquiries about this listing if you provide a telephone number due to time constraints. Unless explicitly stated otherwise, this listing concerns USED GOODS. Packaging may be damaged. Items have been visually inspected and are technically sound as far as can be determined. All offers are ex warehouse 47441 Moers. If you require shipping, please contact us to discuss packaging and shipping costs. Bdodpolc Du Nofx Apnei If interested, feel free to call. All dimensions are approximate. Errors and omissions excepted.

Stanje: dober (rabljeno), Manufacturer: Främbs & Freudenberg Model: 2000-6000-2 Deck Size: 2,000 x 6,000 mm Number of Decks: 2 Included: – Electric motor Bdsdpfsg Snvbjx Apnsi – Cardan shaft – Springs Screening machine can be sandblasted and painted.