Stroj za vrezovanje

STUHLMANN POL 50

Stanje: dober (rabljeno), Leto izdelave: 1971, številka stroja/vozila: 170119003210A0, Offer 25217 Technical Specifications: - Keyway width: 3 to 36 mm - Maximum keyway length: up to 340 mm - Bore diameter: 10 to 350 mm - Feed rate: 0.01 – 0.22 mm - Cutting speed: 2 – 10 m/min Lhedpfxswu Suve Ahueh - Return speed: 20 m/min - Max. tensile force: 1.5 T - Max. workpiece weight: 3 T - Table size: 350 x 450 mm - Working / operating height: 1050 mm - Drive: 400 V / 3 kW - Space requirement: approx. W 900 x H 1250 x D 700 mm - Weight: approx. 900 kg - Comprehensive accessories included as shown

Leto izdelave: 1978, stanje: zelo dobro (rabljeno), Tehnične podrobnosti: - Proizvajalec: DRAWEBA - Model: DDANS 17 l - Leto izdelave: 1978 Ledpfxelf Iqno Ahuohh - Premer žice: 1,4 - 1,6 mm - Velikost odprtine mreže: najmanj 10 x 10 mm - Širina mreže: 1600 mm

Stanje: rabljeno, Leto izdelave: 1966, max. pulling force 5 t, max. stroke 850 mm, max. cutting speed 12 m/min, max. return speed 25 m/min, clamping area 410 x 575 mm, groove width 3 - 90 mm, bore diameter 13 - 500 mm, workpiece weight: 6,000 kg, depth of machine base below floor level 1,400 mm Lhjdpecm Elnofx Ahuoh

Stanje: rabljeno, Leto izdelave: 2005, Machine weight approx. 7,800 kg Space requirement approx. 3,380 x 3,950 x 3,015 mm Workpiece with external gear: - Largest module (steel approx. 600 N/mm²): 3 mm - Maximum width: 26 mm - Maximum diameter: 100 mm Workpiece with internal gearing: - Largest module (steel approx. 600 N/mm²): 3 mm - Maximum width: 26 mm - Maximum swivel diameter: 150 mm - Maximum internal diameter: 100 mm Tooling: - Spindle taper in milling spindle: HSK-D63 - Milling spindle diameter: 85 mm - Maximum stroke length: 30 mm Machine travel distances: - Radial (X-axis): 180 mm - Column swivel (B-axis): -1 to +11 degrees Machine – workpiece table: - Outer diameter: 220 mm S23i7dru - Clamping diameter: 160 mm - Bore: 63 mm Lodpsudc S Hofx Ahuehh Speeds: - Feed rate X-axis: 12,000 mm/min - Workpiece table (C-axis): 0–400 rpm - Cutter (C2-axis): 0–300 rpm - Spindle stroke (A-axis): 500–3,000 rpm Electrical equipment: - Operating voltage: 480V - Supply voltage: 115V - Control voltage: 24V - Frequency: 60 Hz - Connected load: 35 kVA - Cable cross-section: 35 mm² - Fuse protection: 80 A

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: M-900iA/260L R-30iA, nosilnost: 260 kg, doseg roke: 3.100 mm, proizvajalec krmilnikov: Fanuc, model krmilnika: R-30iA, proizvajalec programirnih enot: Fanuc, Oprema: dokumentacija / priročnik, IRS Robotics® obnovljen industrijski robot. 100 % popoln in popolnoma delujoč: robotska roka, krmilnik, vsi kabli in ročna konzola (teach pendant). Vključuje našo garancijo in podrobno oceno po 77-točkovnem protokolu, ki jo opravijo naši notranji strokovnjaki za robotiko. Znamka: FANUC Tip: M-900iA/260L Krmilnik: R-30iA Nosilnost: 260 kg Doseg: 3,1 m Splošni namen: Dvigovanje težjih bremen, dolg doseg Masa robota: 1800 kg Dobavni rok: Po dogovoru IRS Robotics® obnovljeno: 77-točkovni protokol – popolnoma preizkušen na naših preskusnih mizah, novo olje/mast, nove baterije, temeljito očiščen, prebarvan v želeni odtenek po RAL lestvici. Vključuje meritve natančnosti (ponovljivost, natančnost, zračnost). Lhsdop T Umqjpfx Ahuoh O podjetju: Naše vsakodnevno zanesljivo poslovanje je dobava obnovljenih industrijskih robotov priznanih blagovnih znamk: ABB – KUKA – ABB – YASKAWA. Ustanovljeni leta 2002. Pošiljamo po vsem svetu!

Leto izdelave: 2019, stanje: skoraj kot novo (rabljeno), MUT RWO 360/400-1150 Retort Heat Treatment Furnace Lsdpfx Ajiryyaohuohh - As-new condition: barely used - Documentation available (both electronic and physical) - Includes pallet with spare parts TECHNICAL SPECIFICATIONS Model: RWO 360/400-1150 Max. furnace chamber temperature: ≤ 1150 °C for max. 1 hour Operating temperature: ≤ 1100 °C, ≤ 1050 °C under vacuum Control accuracy: ± 2 K Temperature uniformity: ± 6 K within the range of 600 °C to 1150 °C at the end of the stabilization period Control voltage: 230 VAC / 24 VDC Furnace work chamber: 360 x 400 mm Loading capacity: ≤ 50 kg Heating: Three-zone Pressure: ≤ 350 mbar Final vacuum (cold, clean and dry furnace): < 5 * 10⁻⁵ mbar Footprint: 900 x 1900 x 3000 mm Total equipment weight approx.: 1500 kg Sound pressure level: < 70 dB No liability is assumed for the correctness, completeness, or currentness of the information provided.

Stanje: dober (rabljeno), Leto izdelave: 1984, Wheel diameter - max. 250 mm Wheel width 275 mm Module - max. 6 Machine weight approx. 5.5 t The ZFWZ 250 gear hobbing machine is designed for the efficient production of all hobbed cylindrical gears, such as: - Straight and helical gears, worm wheels and worms, splined shafts, keyed shafts, serrated gears, chain wheels, ratchet wheels, as well as conical and crown-shaped straight and helical gears. Change gears and milling accessories Technical Data: - Workpiece diameter (max): 250 mm - Module (max): 6 mm - Axial feed travel (max): 275 mm - Tangential feed travel (max): 100 mm - Helix angle (max): 45 degrees Ledpfx Ahsv T Nqasuehh - Cutter diameter (max): 145 mm - Cutter length (max): 170 mm - Table clamping surface (min): 195 mm - Table clamping surface (max): 470 mm Performance Cutter speeds - Two-range, stepped: 56 ... 250 rpm - (Standard version): 90 ... 400 rpm - Infinitely variable in two ranges: 63 ... 180 rpm - (Special version with DC motor): 140 ... 400 rpm Weight - Net weight of the machine: approx. 5,000 kg - Electrical cabinet: approx. 800 kg - Hydraulic unit + coolant tank + chip conveyor: approx. 700 kg Overall dimensions (with oil mist filter) - Length: Standard version: 3,950 mm DC drive: 3,450 mm (or 3,350 mm according to the table) - Width: 3,300 mm - Height: Machine: 1,980 mm Machine with DC drive: 2,150 mm Electrical cabinet: 2,200 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Tehnični podatki: Delovna širina: 2600 mm Zmogljivost upogibanja: 20,0 mm Pred-upogib: 16,0 mm Premer zgornjega valja: 330 mm Premer srednjega valja: 300 mm Premer stranskih valjev: 240 mm Stožčasta naprava za upogibanje z nagibom obeh stranskih valjev Lhsdjx Ii Hvepfx Ahuoh Premična upravljalna konzola z digitalnim prikazom Moč motorja: 11 kW Oznaka CE Dimenzije (dolžina x širina x višina): pribl. 5800 x 2300 x 1900 mm Teža: pribl. 11 t Dodatna oprema: Zgornja pomoč pri upogibanju Prodajalec ne odgovarja za morebitne napake pri pisanju ali prenosu podatkov. Stroj je po videzu, tehniki in obrabi primeren svoji starosti; rabljeni stroji se prodajajo brez kakršnegakoli jamstva.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1991, Swing diameter: 400 mm O F F E R We can offer you the following, subject to prior sale and errors, ex stock, without obligation: WMW - GLAUCHAU Universal Internal Cylindrical Grinding Machine with Face Grinding Device Type: SI 6/1 AS-N x 315 Year of manufacture: 1991 _____ Internal grinding diameter range: 40 - 400 mm Maximum grinding depth: 315 mm Maximum external cylindrical grinding diameter: 400 mm Maximum workpiece weight: 630 kg Workpiece swing diameter with / without chuck guard: 500 / 600 mm Centre height above table: 360 mm 16-step workpiece spindle speeds: 40 – 400 rpm Workpiece spindle bore, approx.: 53 mm Workpiece headstock swiveling max.: 30° Workpiece headstock cross adjustment, max.: 400 mm Grinding spindle stock r-feed: 70 mm Grinding spindle stock cross adjustment, approx.: 100 mm Grinding head infeed, automatic intervals: 0.001 – 0.025 mm/stroke Grinding head infeed, continuous: 0.1 – 1 mm/min Table stroke, max.: 630 mm Table speed infinitely variable: 0.1 – 8 m/min (10 m/min) Distance between workpiece headstock and grinding spindle, max.: 1,250 mm Grinding spindle stock adjustment on table: 520 mm Grinding spindle drive approx.: 7.5 kW Total drive approx.: 17 kW - 380 V - 50 Hz Weight, approx.: 6,000 kg Accessories / Special equipment: • Universal internal grinding spindle stock with program-controlled cycles for grinding cylindrical and conical bores with one or more diameters, external cylindrical grinding and narrow face grinding • Face grinding device, hydraulically swiveling, with automatic cycles for grinding single and multiple face surfaces as well as stepped faces simultaneously • Electronic program control with large operating panel and ampere meter for both grinding spindles • Belt-driven grinding spindle drive with built-in grinding spindle and 5 separate, interchangeable grinding spindles with various belt pulleys of different diameters • Dressing unit for both grinding spindles, large chuck guard at the workpiece headstock • HEIDENHAIN digital display for cross adjustment of the workpiece headstock • Extensive accessories including 4-jaw faceplate approx. 520 mm, 3-jaw chuck approx. 380 mm, 3-jaw chuck approx. 130 mm, belt pulleys, spindle sleeves, grinding wheel mounts, foot switch • Separate hydraulic unit, mounted control cabinet, coolant system with magnetic separator Ljdpfx Asxyllvohuehh Condition: Good to very good! Suitable for all grinding tasks! Please click here for a video of the machine: Delivery: Ex stock, available immediately, FCA Metzingen Payment: Net - upon receipt of invoice

Stanje: rabljeno, Leto izdelave: 1965, Groove width 3 - 90 mm Lodpfx Ahjtv Iatsushh Drawing length 430 mm Working speed 4 - 12 m/min Groove length 400 mm Return speed 15 m/min Total power requirement 5.5 kW Machine weight approx. 1.4 t Space requirement approx. 1.3 x 1.7 x 1.5 m with various drawing needles and guides