Optimizacijska žaga

STROMAB TR 600 Matrix II

Stanje: novo, Leto izdelave: 2024, Mitre saw with electronic pusher and controlled axis. Cutting capacity: 55 x 360, 80 x 340, 95 x 325, 125 x 295, 135 x 280 mm Minimum workpiece thickness: 10 mm Work table inclined at 8° Technical Features of the Saw Unit: Pneumatic up-cut saw TR500 Motor power: 10 HP (7.5 kW), 400V/50 Hz TCT blade diameter: 500 mm, bore: 30 mm, teeth: 144, thickness: 4.6 mm Cutting cycle speed: 4 seconds Technical Features of the Feed System: Lsdpehw Ng Ijfx Abberg PUSH FEED SYSTEM AVAILABLE LEFT AND RIGHT SIDE Feed via rack and pinion system and brushless motor Positioning accuracy: +/- 0.4 mm Powerful infeed motor for package weight up to 80 kg Maximum speed of feed system: 90 m/min Pneumatic raising of the pusher at the end of the cutting cycle with overhead return Data Input Management: 12-inch TOUCH-SCREEN controller (800x600 pixels) USB port Ethernet port Linux operating system Load and save machine parameters via USB port Edit and enter cut cycles (patterns) directly on the controller Upload cut lists created on PC via USB or Ethernet port Operating Software: Manual input of stock length Partial optimization without length reading of the board Cutting cycle with 3 optimization options (maximum length, sequence, and board order) Up to 1000 cut lists with 11 sizes each or one list with 10,000 consecutive sizes "OPTI" package: automatic board length detection and full optimization Piece length measurement via photocell Cutting cycle with 6 optimization criteria: (longest length, sequence, board order, volume, minimum waste, and priority length) "OPTI PLUS" package: complete optimization with knot and defect elimination (OPTION NOT INSTALLED ON THE MACHINE) Technical Description: "OPTI PLUS" package: for removing knots and defects Photocell for reading knots and defects for timber mapping Marking with fluorescent chalks/crayons (Note – only orderable in combination with ZA250) Pneumatic side clamping unit

Stanje: dober (rabljeno), Koda: 0323 Blagovna znamka: SML - ITALIJA Model: SILVER P 35/EL - CE standard Elektronska dvoglava kotna žaga za rezanje lesa, okvirjev, PVC, aluminija, plastike in različnih materialov – CE standard. Lsdpfx Abjtu Hy Esbjrg Tehnični podatki: - Olio-pnevmatsko spuščanje žagine glave - Največja dolžina reza: 5200 mm - Najmanjša dolžina reza: 50 mm - Višina reza: 100 mm - Največja širina reza: 170 mm - Premer žaginega lista: 350 mm, izvrtina 30 mm - Motor: 3 KM vsak, 3000 vrt/min - Elektronski programator za pozicioniranje žagine glave - Bimanualni nadzor spuščanja žaginega lista - Pnevmatska pritrditev obdelovanca - 2 odsesovalna priključka, premer 60 mm - Obratovalni tlak: 7 bar - Skupne dimenzije (DxŠxV): 6300 x 1000 x 1600 mm - Teža: 1100 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Power output: 1.5 kW Saw blade speed: 2800 rpm Saw blade diameter: 250 mm Saw blade bore: 30 mm Cutting length: 400 mm (with 20 mm workpiece thickness) Cutting length at 45 degrees: 230 mm Cutting depth: 65 mm Arm swivel lock: +/- 45 degrees Weight: 140 kg Motor protection switch Brake motor Emergency stop switch CE Marking Ledpfxsulzcho Abborg Including dust collection hood for extraction connection, diameter 120 mm Note on used machines: • Technical details are subject to errors and prior sale. • Prices listed are ex-location, loaded free onto transport. • The machines have been cleaned and functionally tested. • All machines are sold as inspected, without any warranty or guarantee. Buyers are welcome to inspect the machines at the specified location. • Special agreements are only valid in written form. (Inquiries will only be answered if you provide your address and telephone number!)

Stanje: dober (rabljeno), Litinové desky Délka: 3970 mm Lsdsh Awqgspfx Abbjrg Šířka: 2060 mm Využitelná plocha (D x Š x V): 3910 x 2000 x 350 mm Dodáváno se 6 nivelačními nohami Hmotnost: 7 t K dispozici 2 stejné desky.

Leto izdelave: 2018, Stanje: kot nova (razstavni stroj), Cut-off Saw AS-600 Demonstration machine Includes saw blade with a diameter of 600 mm. Includes automatic minimum quantity lubrication system. Includes smooth table and manual length stop. Lrodpsd A T Efofx Abbeg The machine can be viewed on site by arrangement.

Stanje: rabljeno, Circular saw blade diameter: 500 mm Max. cutting height: 120 mm Motor power: 5.5/7.5 kW Working length: 4100 mm Salvapush 2000 optimizing cross-cut saw For complete wood optimization and defect cutting Version 4100 (working length) ----- Technical specifications: - Cutting range: min. 30x12 mm, max. 270x120 / 300x95 mm. Optional special cutting ranges on request. - Plate length before cutting: min. 500 mm, max. 4100 / 5100 / 6100 mm, depending on version - Possibility of a single cut in the last 40 mm of the board. Minimum final trim length: 5 mm. - Maximum wood weight: 120 kg (optional special solution on request) - Feed with pusher, directly controlled by an innovative computer-controlled and servo-driven system, digitally connected via EtherCAT. - Special working table inclined at 25 degrees for easy loading and to hold the workpiece securely clamped - Double steel frame construction, highly robust, reinforced and painted. - Special rear safety locking device for appropriate occupational safety. Pusher speed up to 60 m/min in compliance with current safety regulations: Carriage travel speed can be set directly from the computer depending on cutting area. Faster version optionally available. - Very sturdy pusher carriage: extended dimensions approx. 300x345x25 mm. - The aluminum support is large and solid: height 135 mm, width 120 mm. - Special transmission system with 50 mm wide toothed belt with 33 hardened steel bands inside, ensuring high precision and performance - Electronic brushless servo motor with constant torque and digital EtherCAT connection - Photoelectric laser cell for wood detection, and a luminescence reader for fluorescent markings. System is fixed-position, eliminating manual adjustments when wood thickness changes. - Electronic operating system S-OPTIM - Complete management of up to 5 cutting grades - Robust discharge table for collecting the cut workpieces, made of hard steel, length 3000 mm. Inclined at 25 degrees, same as rest of the conveyor, and complete with guide ----- Price of the machine as listed: on request! ----- Optional extras (at surcharge): - Extended discharge (outfeed) table - Gravity preloading system - Zebra label printer - Saw motor upgrade from 5.5 kW to 7.5 kW - Extension of cutting range to 140x240 – 100x300 with circular saw blade diameter 550 mm - Horizontal side discharge - Wide pusher plate Lrodpfx Aswhf Ipobbeg Optional alternatives to discharge (outfeed) table: - Version TT: rotary discharge table for full discharge of all cut parts in one cycle - Floor flap for discharge table with rotary function to remove end pieces from trimmed lumber - Version LS: electronic sorting unit For sorting cut pieces by size and grade with 3 high-speed ejectors ----- Prices for the above options: on request! ----- (Technical data as per manufacturer's specifications – subject to change without notice!)

Stanje: novo, Leto izdelave: 2024, Crosscut Saw, Optimizer STOMANA S500 Infeed table: 2000 mm Outfeed table: 2000 mm Pneumatic stops: 2 pcs Blade diameter: ø500 mm Blade thickness: 4.2 mm Shaft diameter: ø35 mm Shaft speed: 2800 rpm Upper extraction nozzle diameter: ø100 mm Lower extraction nozzle diameter: ø120 mm Motor power: 5.5 kW Compressed air pressure: 6.0 – 8.0 bar Lrodpfjlk Dy Hex Abbsg Overall dimensions (L x W x H): 4530 x 900 x 1300 mm Working table height: 900 mm Weight: approx. 200 kg

Stanje: pripravljen za uporabo (rabljen), Technische Eigenschaften Max. Sägeblatt-Ø: 450 mm, Bohrung: 30 mm Motorleistung: 4 kW Drehzahl: 2800 U/Min Schnittkapazität (Höhe x Breite Holz): 25 x 330 mm, 50 x 300 mm, 100 x 250 mm Lrodpfx Aberadt Djbsg Einlauftisch: Auslauftisch: Tigerstop-Längenanschlag im Lieferumfang 2 Absaugstutzen Ø 100 mm Ideal zum Zuschneiden von: Holzfliesen, Verpackungen, Paletten, Sparren, Schnittholz Stromversorgung und Motoren Spannung: 380 V Anschluss: Drehstrom Leistung: 5,5 kW Motor: 7,5 PS Abmessungen gesamte Länge: 2100 mm Breite: 1010 mm Höhe: 1210 mm Gewicht: 310 kg

Stanje: rabljeno, Leto izdelave: 2001, Podmizna kapna žaga HM-D 6500-R Serijska številka: 319 Priključna napetost: 400V - 11kW Teža: 2450 kg Največji premer žaginega lista: 550 mm Najmanjši premer žaginega lista: 500 mm Izvrtina: 30 mm Lrjdpfx Abewng Sijbeg Dolžina avtomatskega pomika: neznano Dobavljivo od avgusta 2024 dalje - Leto izdelave: 2001 - Dokumentacija na voljo: Ne - CE certifikat: Ne - Serijska številka: 319 Finančne informacije DDV: Navedena cena je brez DDV DDV/obdavčitev razlike: DDV je odbiten za podjetja Dostava in odkupi možni kadar koli za vso industrijsko opremo Yorick Diebels