Pila z nihalom

Stromab PS50/0

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2013, obratovalne ure: 7.900 h, številka stroja/vozila: #652, nosilnost: 350 kg, tip droga: teleskopski, dvižna višina: 28.000 mm, dolžina platforme: 1.800 mm, širina platforme: 800 mm, skupna masa: 7.490 kg, transportna dolžina: 7.550 mm, transportna širina: 2.500 mm, gradbena višina: 3.450 mm, Attention: This rental fleet machine is expected to become available in January 2026. Working height: 30.00 m Platform height: 28.00 m Lateral outreach: 20.50 m Overall length: 7.55 m Overall height: 3.45 m Overall width: 2.50 m Pgsdpfxswnq Dpo Agpow Platform capacity: 350 kg Permissible total weight: 7,490 kg Work basket (LxWxH): 1,800 x 800 x 1,100 mm Slewing range: 540° Basket rotation: +/- 85° Stabilizer width: 2.56 / 3.90 / 5.10 m Other features: - Basket jib 195° - Crank rotation table - Automatic basket jib stowage - Roof protection grid 04/2024: Clutch and master-slave cylinder replaced; oil sump and fuel filter sealed 09/2024: Right joystick module replaced 10/2024: Fuel filter and basket tilt sensor replaced 11/2024: Rotary encoder replaced 01/2025: 2x truck batteries replaced 04/2025: Solenoid coil replaced As of 28 April 2025: approx. 73,000 km, approx. 7,900 operating hours Price: ON REQUEST

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, premer žaginega lista: 600 mm, OPTIMIZATION CROSS-CUT SYSTEM WITH ROTATABLE SAW UNIT CT600 / 6000, max. raw part length 6,000 mm Cutting dimensions at aggregate position A At 0°: 200 x 215 mm, 50 x 370 mm At 30°: 200 x 185 mm, 50 x 325 mm At 45°: 200 x 150 mm, 50 x 265 mm At 80°: 200 x 35 mm, 50 x 63 mm Cutting dimensions at aggregate position B At 0°: 160 x 315 mm, 40 x 400 mm At 30°: 160 x 270 mm, 40 x 350 mm At 45°: 160 x 220 mm, 40 x 285 mm At 80°: 160 x 52 mm, 40 x 70 mm Min. workpiece thickness: 10 mm (20 mm with automatic feed) Pgjdpfx Agsv Aub Njpew Support table inclined 8° Pusher reference side on the right Technical data – saw unit: Unit including table rotatable Motor: 7.5 kW, 400 Volt, 50 Hz TCT saw blade diameter: 600 mm, bore 30 mm, 60 teeth, thickness 5 mm Average cut cycle approx. 4 seconds Automatic aggregate rotation: -70° to +70° Saw unit rotation -80° to +80° on request Rotation from 0° to 70° in approx. 1.3 seconds Positioning accuracy +/- 0.2 mm Hold-down system consisting of 2 pneumatic pressure cylinders with mounted pressure rail Lateral pressure plate system with electronic control Technical data – pusher system: Feed via pinion and rack system with brushless motor Positioning accuracy +/- 0.4 mm Feed motor power suitable for pushing a bundle weight of 80 kg Max. feed speed 90 m/min Pneumatic pusher lift after completion of the cutting cycle and return at feed height Control: 12-inch "Touch-Screen" BECKHOFF professional PC with WINDOWS operating system USB port Ethernet port Machine data load and save via USB Cutting program editing directly at the input unit Transfer of cutting lists via USB or Ethernet Direct import of .btl (10.4) format files Operation Software: Up to 1,000 cutting lists with up to 11 different cutting dimensions each, or 1 list with 10,000 different cutting dimensions in sequence Cutting cycle with 4 optimization options (max. length, min. waste, sequence, length priority) Graphical representation of workpiece Installed additional options: ZA110 outfeed table (per meter) ZA040 saw unit table rotation 80°

Stanje: novo, Leto izdelave: 2023, številka stroja/vozila: A2306/9210, The pneumatic drawer and frame press, model Box V3.0, enables the easy and fast assembly of drawers and frames. Thanks to its functional design, both individual workpieces and complete boxes with a wide variety of joints can be optimally pressed. This ensures a perfect joint and form of drawers and frames. The special pressing process also prevents folding joints and fronts with glass inlays from becoming deformed. Maximum pressing force: vertical: 800 kg / horizontal: 800 kg Adjustable depth stops to accommodate protruding drawer fronts during pressing Slow approach of the movable pressing unit to the workpiece Operation of the press via joystick Optional equipment: Pedpfx Asgqfnzjgpegw - Digital positioning display - Kit Door (for frontal pressing of furniture corners) Advantages: - High flexibility: Variable pressing force and compatibility with various drawer and frame dimensions - Minimal setup times enable high output - Intuitive operation - High operating safety through CE safety standards, e.g. two-hand operation - Plug & Play

Stanje: novo, Leto izdelave: 2025, Multitel MTE 270 on Iveco 'Daily' – 3.5t truck-mounted aerial platform (self-propelled access platform/lift) – year 2023 – NEW with warranty – Pgedpfxjq T Nycj Agpow

Stanje: rabljeno, Leto izdelave: 2021, premer žaginega lista: 800 mm, vrtljajska hitrost (min.): 1.450 obr/min, moč: 5,5 kW (7,48 KM), Cut-off Saw AS Very good, well-maintained condition Saw blade diameter: 800 mm Sturdy steel tube base frame High-performance saw motors Pneumatic material clamps (3 units, vertical) Two-hand safety controls Pgjdpsd Szf Nsfx Agpjw Coolant system Protective cover Optional with length measuring system or automatic positioning system Available as a saw-drilling automatic machine or saw-punching automatic machine on request.

Stanje: dober (rabljeno), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, Fully automatic electronic control with program selector switch FLUSHING-GLUING-GLUING/INSERTING - Dowel feed via electronic vibratory feeder with potentiometer for stepless adjustment of the dowel feed rate Pedev Aubpepfx Agpogw - Closed glue system with 6 bar glue pressure via glue nozzle - Selector switch GLUE/WATER for flushing/cleaning the glue system with EasyClean function button (automatic cleaning program for glue hose and glue nozzle via spray funnel and wastewater collection tank) - 1 stainless steel container for 7.5 kg glue, and 1 stainless steel container for 7.5 l water for flushing/cleaning incl. 1 gun for dowels Ø 8 mm Dowel length 25 - 40 mm Glue / dowel insertion tool has been completely overhauled and has not been used since.

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, premer žaginega lista: 500 mm, največja višina reza: 145 mm, največja širina rezanja: 510 mm, skupna masa: 400 kg, premer ekstrakcijske šobe: 150 mm, vrtljajska hitrost (min.): 2.800 obr/min, moč: 5,5 kW (7,48 KM), STROMAB PS 50/F Crosscut Swing Saw - Brand NEW Specification: • Condition: New • Motor power: 5.5 kW • Blade diameter: 500 mm • Motor shaft diameter: 30 mm • Motor speed: 2,800 rpm • Max. cutting width: 510 mm • Max. cutting height: 145 mm • Additional extension tables: 2 x 2 m • Weight: 400 kg • Year of manufacture: 2024/2025 • Noise emission: 85.5 dB(A) • CE compliant Additional information: Podjrdwm Tjpfx Agpegw • The tables shown in the pictures are included with the machine (2 x 2.0 m) • Available within 7–10 working days • Price does not include VAT or transport costs

Stanje: zelo dobro (rabljeno), Beam Cutting Center STROMAB CT800 Cutting center for large cross-section beams – an optimal solution for woodworking and timber frame construction. Thanks to electronically controlled 5-axis technology, it meets all requirements for straight, angled, and compound cuts. Ensures maximum processing speed and finished product quality, reducing labor input and maximizing output. The CT800 can process beams of any length with cross-sections from 120×45 mm up to 290×280 mm. The beam feed system features driven rubber wheels and pneumatically tilted top hold-downs. Specification: Motor power: 18 kW TCT saw blade: 800 mm Number of electronically controlled axes: 4 Saw table rotation: 0° ÷ 340° Table rotation speed from 0° to 340°: 18'' Blade angle: 90° ÷ 45° Pgsdpfx Aewtw Avegpow Positioning speed: 0 ÷ 17 m/min Cutting range: At 90° with single stroke: mm 280×290 / 250×390 / 200×450 At 90° with table feed and repeated cuts: mm 280×770 / 250×840 At 45° with single stroke: mm 200×210 At 45° with table feed and repeated cuts: mm 200×760 Max. longitudinal cutting height: mm 300

Stanje: dober (rabljeno), Leto izdelave: 2000, Schroeder Mosaic Press 160 mm. Bonding patterns – brick/bond (English pattern) panel 640x274 mm and halves 640x137 mm, bonded in 6 variants: - single brick, offset 50% - double brick, offset 50% - triple brick, offset 50% - single brick, offset 25% Pgjdpjr Iyvbjfx Agpjw - double brick, offset 25% - triple brick, offset 25%

Stanje: rabljeno, prevoženi kilometri: 48.677 km, moč: 130 kW (176,75 KM), prva registracija: 01/2011, skupna masa: 3.500 kg, vrsta goriva: dizel, barva: bela, vrsta prenosa: mehanski, Oprema: ABS, elektronski program stabilnosti (ESP), parkirni grelec, Nissan Cabstar 35.13 PALFINGER Aerial Platform 26 Meters 4x2 Suspension: leaf spring Wheelbase: 2.95 m PALFINGER Aerial Platform Pjdopvli Sepfx Agpjgw Model: P 260 B Year: 2011 4x hydraulic extensions 4x hydraulic outriggers 1x work basket (1.40 m x 0.70 m x 1.10 m) Equipment: - electric windows - auxiliary heater We are also happy to assist you with financing/leasing options in cooperation with our partners. All information without guarantee. Subject to error and prior sale.