3D tiskalnik PolyJet

Stratasys J750

Stanje: potreben popravila (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 8500243, Leto izdelave: 2017, skupna dolžina: 1.400 mm, skupna višina: 1.100 mm, skupna širina: 1.260 mm, vrsta vhodnega toka: Klimatska naprava, skupna masa: 430 kg, vhodna napetost: 230 V, vhodni tok: 13 A, vhodna frekvenca: 5.060 Hz, temperatura okolja (min.): 18 °C, okoljska temperatura (maks.): 25 °C, S 3D tiskalnikoma Stratasys J750/J735 lahko optimizirate in pocenite proces izdelave modelov iz različnih materialov na isti gradbeni plošči, v isti tiskalni nalogi. Z J750/J735 tiskalnikom lahko že v fazi načrtovanja (s CAD programsko opremo) posameznim delom modela določite barve, model shranite kot VRML datoteko in ga natisnete v želenih barvah. Stratasys J750 ima delovno površino 490 x 390 x 200 mm (19,3 x 15,35 x 7,8 in). Nwjdpsvu Riajfx Adysb Rezervni deli in material so na voljo. Stroj je bil uporabljen izključno za lastno uporabo, predvsem za razvoj izdelkov.

Leto izdelave: 2023, Stanje: novo, In the area of 3D thermoforming, we also offer presses, turners, foil carousel storage systems, and brushing machines on Machineseeker! MEMBRANES for membrane presses – made of silicone or natural rubber Top-quality and suitable for all membrane presses (foil and veneer presses). You can purchase our membranes either pre-cut to your required dimensions or as roll stock. SILICONE Type: MS-2 Colour: milky white Surface: fabric-patterned/smooth Standard widths: 1680/2000 mm Polymer base: silicone Shore hardness: 50° Shore Thickness: 3 mm Operating temperature: min. -50°C / max. 200°C SILICONE Type: MS-1 Colour: milky blue Surface: smooth Standard widths: 1600/1800 mm Polymer base: silicone Shore hardness: 45° +/- 3° Shore Thickness: 2 mm Operating temperature: min. -60°C / max. +230°C NATURAL RUBBER Type: MNK-2 Colour: grey Surface: smooth/fabric-patterned Standard widths: 1700–1750 and 2000 mm Rubber: natural rubber Shore hardness: approx. 42° Shore Thickness: 2.5 – 4.0 – 5.0 mm Operating temperature: min. -20°C / max. +130°C NATURAL RUBBER Two-layer version for waterbed/oil presses Type: MNK-2 WB Colour: grey/black Surface: both sides smooth Standard width: 1700 mm Rubber: natural rubber Shore hardness: approx. 42°/60° Shore Thickness: 3.5–4 mm Operating temperature: max. 130°C Standard SILICONE Type RSS Colour: red-brown or transparent (other colours available upon request) Surface: both sides smooth Nwsdped S Efajfx Adyeb Standard length: cut to size or 10 m rolls (other lengths available on request) Standard width: 1200 mm (up to 1800 mm available on request) Polymer: silicone Shore hardness: 30°–80° Shore Thickness: 0.5–10 mm

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 8500144, Leto izdelave: 2016, obratovalne ure: 4.739 h, The Stratasys J750 is a true masterpiece in the field of 3D printing. With its revolutionary technology and an impressive range of colors and materials, it enables you to create stunning, realistic, and highly precise models. You can choose from over 500,000 color variations and achieve an incredible level of detail. This means you can reproduce even the finest textures, smooth surfaces, and complex geometries in your models. Nwedpforridtsx Adysb The technology of the Stratasys J750 is based on the PolyJet process, which delivers highly accurate results with exceptional surface quality. Models can be printed with a layer thickness of either 27 µm or 14 µm, giving you the option to focus on either maximum resolution or maximum speed. In all modes, the PolyJet technology allows you to print intricate models with fine details. With its enlarged build chamber of 490 x 390 x 200 mm, the J750 allows for the creation of a greater number of complex and detailed models in a single print session, saving both time and effort. Operating the Stratasys printer is straightforward and user-friendly. With the free GrabCAD software, you can easily prepare your models and monitor the printing process. For model materials, you can use rigid photopolymers in white, black, grey, blue, cyan, magenta, yellow, and transparent, available in 3.6 kg cartridges. The machine can also print flexible and dental model materials. There are twelve material bays, and the device automatically switches from an empty to a full cartridge, allowing for even longer unattended printing. With digital printing mode, you can produce complex multi-component and multi-material models. You have the freedom to combine different materials, colors, and Shore hardness levels within a single model. The J750 allows you to mix six different model materials at once, enabling you to produce models in full color. The printer operates with gel-like support material SUP705. For optimal removal, we recommend a WaterJet cleaning station, which we can offer together with the printer. This printer is part of the Certified Pre-Owned (CPO) program. Certified Pre-Owned 3D printers are used 3D printers that have been completely overhauled, serviced, and subsequently verified with a 24-hour test print by our experts. In the case of the Objet24, we also have some new units in stock. Maintenance contracts and other services We provide comprehensive support before, during, and after your purchase. In addition to our services such as on-site installation and team training, we also offer the delivery of accessories, spare parts, and materials. By signing a maintenance contract with us, you benefit from full planning and cost certainty, rapid response times, and minimized machine downtime. This means you take no risks with your purchase. If you are not yet sure which 3D printing system is right for you, we are happy to advise you and answer all your questions regarding 3D printing. Request your personalized quote today.

Leto izdelave: 2020, Stanje: novo, Designed as a plug-and-play complete system mounted on a mobile stainless steel base plate with juice pump, featuring a 63 kW Wolf oil-fired boiler, 2 heat exchangers, pasteurization section for approx. 20–30 seconds with automatic control, consisting of: heating circuit, heating circuit pump, and expansion vessel; 2 plate heat exchangers for juice preheating/cooling and heating up to 80°C; 24 m pasteurization section; automatic pneumatic temperature control. Nwedscx R Ddspfx Adyeb Capacity: 5,000 liters of juice per hour (depending on inlet juice temperature).

Stanje: dober (rabljeno), Approx. 30 linear meters of shelving system Schaefer R3000 Manufacturer: Schaefer R3000 Condition: As new, see photos. More than 300 meters available in stock. Uprights, galvanized, height 2.5 m, depth 40 cm Shelves, galvanized, 100 kg load capacity per shelf, bay width approx. 100 cm Asking price: €2,890.00 net ex-works Scope of supply: 31 upright frames, 2.5 m, galvanized 90 shelves, 100 kg load capacity per shelf, galvanized 10 cross braces for stabilization 3 shelf levels per bay (additional levels available at extra cost) Other configurations possible. Heights available: 2.3 m, 2.5 m, or 3 m. Goods are in stock. We always have over 3,000 linear meters of pallet racking from various manufacturers in stock. Transport and assembly available upon request. Further information available on request. (Subject to change and errors in technical data, specifications, and prices. Sale subject to prior sale. Please refer to our terms and conditions. All prices exclude VAT, ex-works.) Purchase / Sale: We are continuously buying and selling a wide range of items from various sectors. To visit our website, please click on our logo! - Swept clean business clearances - Company liquidations - Fast – flexible – efficient! Njdpfxocfhx To Adyjwb We also clear out and/or dispose of inventory for insolvency administrators. Please send us a brief inquiry, and we will get back to you promptly.

Stanje: rabljeno, Cisaille guillotine hydraulique STEINER type HTS 30/20 R Nwsdpfx Adsd Hxx Ajyjb N° de machine : 315 Année : 1982 Longueur de coupe : 3050 mm Épaisseur de coupe : 20 mm Butée arrière : 800 mm motorisée Puissance moteur : env. 30 kW Alimentation : 400 V, 50 Hz - Butée arrière avec commande de positionnement ELGO - Réglage de la butée arrière par vis à billes - Barrière immatérielle de sécurité SICK à l’avant comme protection contre l’intrusion - 3 bras-supports de tôle avec rouleaux à billes - Pédale électrique - Lames de rechange - Refroidisseur d’huile avec échangeur thermique à air - Machine très massive, construction très robuste Encombrement de la machine de base (L x l x h) : 4650 x 2610 x 3200 mm Poids de la machine de base : 27 000 kg Dimensions de transport (machine de base) (L x l x h) : 4650 x 2610 x 3200 mm Dimensions de transport (supplémentaire) (L x l x h) : 3500 x 2450 x 1400 mm Poids total : 27 000 kg Bon état Machine visible dans notre dépôt à 37235 Hessisch Lichtenau, essais de coupe possibles.

Leto izdelave: 2019, Stanje: skoraj kot novo (rabljeno), MUT RWO 360/400-1150 Retort Heat Treatment Furnace - As-new condition: barely used - Documentation available (both electronic and physical) - Includes pallet with spare parts TECHNICAL SPECIFICATIONS Model: RWO 360/400-1150 Max. furnace chamber temperature: ≤ 1150 °C for max. 1 hour Operating temperature: ≤ 1100 °C, ≤ 1050 °C under vacuum Control accuracy: ± 2 K Temperature uniformity: ± 6 K within the range of 600 °C to 1150 °C at the end of the stabilization period Control voltage: 230 VAC / 24 VDC Furnace work chamber: 360 x 400 mm Loading capacity: ≤ 50 kg Heating: Three-zone Pressure: ≤ 350 mbar Final vacuum (cold, clean and dry furnace): < 5 * 10⁻⁵ mbar Nsdpfx Adoiryyajyjwb Footprint: 900 x 1900 x 3000 mm Total equipment weight approx.: 1500 kg Sound pressure level: < 70 dB No liability is assumed for the correctness, completeness, or currentness of the information provided.

Stanje: rabljeno, Stretch blow moulding machine by Etek ISBM Line = Injection Stretch Blow Moulding Stretch blow moulding machine for single-use PET bottles from PET preform blanks Stretch blow moulding machine for rotary table production Manufacturer: ETEK / GF-Industries, Model Supra 800 sv 1 Serial number: 22000225 Nwodpfx Adskucxlsyeb Year of manufacture: 2012 Power rating: 90 kW Power supply: 400 Volt, 50 Hz Net weight approx. 6,000 kg As-new condition

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2017, Glavni pogon Število osi: 5 Hitrost vretena: 15.000 min⁻¹ Moč motorja vretena: 46 kW Ožemalni stožec: SK 40 Pomik Nwjdpfx Adsx D Icljyob Pomik X osi: 2600 mm Pomik Z osi: 900 mm Pomik Y osi: 1100 mm Krmilna enota Znamka: SIEMENS Model: 840D sl Ta 5-osni univerzalni obdelovalni center DMG DECKEL MAHO DMF 260-11 je bil izdelan leta 2017. Univerzalni obdelovalni center z gibljivim stebrom, linearnim pogonom osi X s hitrostjo 80 m/min in hitrostjo motornega vretena do 15.000 min-1. Opremljen je z zaskočljivo glavo, 30-mestnim magazinom orodij in robustno mizo dimenzij 3.200 x 1.100 mm. Izkoristite priložnost za nakup univerzalnega obdelovalnega centra DMG DECKEL MAHO DMF 260-11. Za več informacij o stroju nas kontaktirajte. Tipi aplikacij Rezkanje

Leto izdelave: 2020, Stanje: dober (rabljeno), FFP2 stroj za izdelavo mask tovarna: Ruhlamat tip: MPL FFP2/016 leto izdelave: 2020 Linija za proizvodnjo mask N95/FFP2 Dimenzije (DxŠxV) postavitve: 8921 x 1494 x 1985 mm Prostor okoli naprave: 1500 mm po obodu 50 Hz / 2,6 kVa Tlak: 6 bar Teža pribl.: 2500 kg FFP2 maske so sestavljene iz 3-6 slojev netkane tkanine. Ta stroj lahko izdeluje maske z do 6 sloji. Nwedperm R Hdefx Adyeb Stroj je sestavljen iz petih postaj: Postaja 1 = Odvijalo Postaja 2 = Prebijanje nosnega traku in varjenje z žigosalnim valjem Postaja 3.1 = Tiskanje in varjenje ušesnega traku Postaja 3.2 = Poravnava pregiba Postaja 4: = Varjenje obrisa in rezanje maske