Ročna merilna naprava Zračna merilna naprava

Stotz Hand-Messplatz

Stanje: dober (rabljeno), Leto izdelave: 2014, Spindle speeds: 170 - 18,000 rpm Machine weight: approx. 7.5 t Space requirements: approx. 5.00 x 4.00 x 2.20 m --> CNC retrofit (2014) to Siemens Sinumerik 840D Solutionline --> Overhaul of new control system in 2016 --> Technical Data: Grinding diameter: 20 - 300 mm Swing diameter: 350 (500) mm Workpiece length: 300 (1,300) mm Recommended grinding depth up to: 300 mm Z-Axis Grinding Table Stroke (total): 650 (950) mm Resolution: 0.001 mm Rapid traverse: 12 m/min Grinding feed speed: 0 - 9.99 m/min Feed rate: 0 - 99.99 m/min Incremental feed per reversal: 0 - 0.999 mm X-Axis Grinding Table Stroke (total): 150 mm Pgsdpfx Aew Intaogxok Resolution: 0.001 mm / Ø Rapid traverse: 5 m/min / rev Grinding feed speed: 0 - 5 m/min / rev Feed rate: 0 - 99.99 m/min / rev Incremental feed per reversal: 0 - 0.999 mm / Ø Workpiece spindle head swiveling range: B axis: -32° (-23°) / +2° Resolution: 0.0001° (0.36") U-Axis stroke (total): 300 mm Resolution: 0.001 mm / Ø Traverse speed: 5 m/min Centre height above work table: 200 (300) mm Centre height above grinding table: 330 (430) mm Workpiece spindle bore: 50 (70) mm Original year of manufacture: 1988

Leto izdelave: 1999, stanje: zelo dobro (rabljeno), Control: CNC-controlled and manual operation PC P 2000 MMX-PCI Desktop ATX 15" color monitor, keyboard CNC Turbo Roughness for WINDOWS TECHNICAL DATA Hard stone inspection plate (DIN 876) Length x Width: 1200 x 500 mm Pgsdpfxslxyp Hs Agxek Accuracy grade: Grade 2 Flatness: 16.6 µm Weight: 250 kg Linear Feed Unit Waveline 60 Basic Measuring range: 60 mm Resolution: 0.014 µm Measuring Column Wavelift 400 CNC Travel: 400 mm Positioning repeatability: < 10 µm Machine Dimensions (W x D x H): 1.8 x 0.8 x 2.2 m Weight: 600 kg EQUIPMENT/ACCESSORIES  Full enclosure with electrically operated roller shutters  Hard stone plate 1200 x 500 mm  ISEL feed axis with ball screw drive  Workpiece holding plate  Linear feed unit Waveline 20/60  Measuring column Wavelift 400 CNC  Tilting unit KEG 60 on the measuring column, manual to the Waveline  Installation kit for roughness measurement  Installation kit for contour measurement  Various probes and holders for roughness and contour measurement  Machine table  Emergency stop button on the machine table  Calibration set  Support prisms  Maintenance unit for compressed air preparation  Air damping elements for supporting the hard stone plate  Documentation

Stanje: rabljeno, Leto izdelave: 1992, hitrost vretena (min.): 7.500 obr/min, največja hitrost vretena: 24.000 obr/min, 4 motor-driven grinding spindles (liquid-cooled, with purge air / oil mist lubrication) including the REFU HF frequency converter, e.g., suitable for powering the spindles of a Voumard 400 CNC T4. Grinding spindle GMN TSSV 170-7500 7,500 rpm, 350V, 19.3A, 7.5kW, 250 Hz Grinding spindle Voumard BM15-170 15,000 rpm, 350V, 35A, 18kW, 250 Hz Grinding spindle Voumard BM18-15032 Pjdpfx Agol Tn Afjxegk 18,000 rpm, 350V, 28.5A, 12kW, 600 Hz Grinding spindle Voumard BM24-150 24,000 rpm, 350V, 27A, 12kW, 800 Hz REFU HF Frequency Converter 316/25 High-frequency converter (inverter, frequency converter) Frequency converter, frequency inverter for powering motor spindles GMN tool spindle, motorized grinding spindle The spindles are fully functional but are sold without warranty – year of manufacture approx. 1992. A batch of various grinding spindle shafts / arbors for grinding wheels is available for these spindles and can be purchased separately. Price / details on request. All technical data subject to errors and misprints. We sell exclusively to countries of the European Community.

Stanje: novo, Leto izdelave: 2026, - TFON Sistem zaobljenja rubova in čišćenja površine. - Kompatibilnost materijala: Prikladan za meki čelik, aluminij i nehrđajući čelik. - Raspon radne debljine: Obrađuje materijale debljine od 0 do 120 mm. - Zaobljavanje rubova: Osigurava zaobljivanje rubova radijusa 2 za glatke i sigurne rubove, poboljšavajući izgled i funkcionalnost obratka. - Precizna kontrola: Opremljeno Siemens automatizacijskim sustavom za preciznu i konstantnu kontrolu tijekom cijelog procesa. - Neovisne stanice: Višestruke procesne stanice omogućuju svestrano rukovanje, dopuštajući izvođenje različitih operacija istovremeno ili uzastopno. - Opcije radnog stola: Dostupne veličine radnih stolova: 650 mm, 1000 mm ili 1300 mm—prilagodljivo prema proizvodnim potrebama. - Tipovi stolova: Fleksibilne konfiguracije uključuju magnetski, vakuumski ili magnetsko-vakuumski stol za sigurno pozicioniranje različitih materijala i veličina dijelova. - Plazma i kisik tehnologija: Primjenjuje naprednu plazma i kisik tehnologiju za učinkovito uklanjanje jakih srhova i troske nakon rezanja, osiguravajući čišće i glađe površine. - Čišćenje površine: Učinkovito uklanja površinske nečistoće poput hrđe, oksida i naslaga, pripremajući dijelove za daljnju obradu. - Zaobljavanje za premazivanje: Priprema dijelove za bojanje i premazivanje stvaranjem ujednačene, besprijekorne površine. Pgedpfx Agehq A T Uexjk - Industrijske primjene: Idealno za distributivne centre čelika, energetiku, rudarski sektor, građevinsku i automobilsku industriju—nudi rješenja prilagođena zahtjevnim uvjetima rada. - Ujednačeni rezultati: Šest lamelnih kotača radi sinkronizirano kako bi se postigla dosljedna, ujednačena zaobljenost rubova na svakom dijelu. - Pneumatski oscilacijski sustav: Produljuje vijek trajanja brusnih traka smanjujući trošenje i održavajući konstantne radne karakteristike kroz vrijeme.

Stanje: rabljeno, Length: 1800 mm Width: 1200 mm Machine weight approx.: 1.6 t Space requirement approx.: 1.8 x 1.2 x 0.4 m Pjdpfscxxu Dex Agxegk - Measuring plate with 5 special feet - Good condition

Leto izdelave: 2000, stanje: rabljeno, x-travel 1000 mm y-travel 1600 mm z-travel 800 mm Control system: WENZEL WPC 2040/FW31.351 Total power requirement: kW Machine weight approx. 5500 kg Required space approx. m WENZEL CNC-controlled vertical 3-D coordinate measuring machine Model: LH 108 CNC Year of manufacture: 2000 (continuously serviced and calibrated by manufacturer) Y-axis as longitudinally movable measuring portal: 1,600 mm X-axis as transverse measuring head carriage: 1,000 mm Z-axis as vertical measuring spindle: approx. 800 mm Max. workpiece weight / table load: approx. 2,250 kg Clearance under measuring portal: approx. 900/1000 mm Overall table size: approx. 2,600 x 1,250 mm Table height above floor: approx. 700 mm Table plate thickness: 380 mm Machine height: approx. 3,100 mm Weight: approx. 5,500 kg Special Equipment / Accessories: • Measuring table, crossbeam, and spindle made of dark natural hard stone; table with 6 x 9 threaded holes for securing workpieces/fixtures • All axes are air-bearing, making them easy to operate, virtually wear-free, and equipped with incremental linear scales with a resolution of 0.0005 mm • WENZEL CNC control unit Type WPC 2040 / FW31.351 built into the workstation (Control system was replaced approx. 3 years ago) • WENZEL measuring software Type METROSOFT QUARTIS R 12 SP 1 with SurfPro package and QUARTIS Q-DAS • RENISHAW motorized rotary and swivel head (automatic indexing in 7.5° steps) with measuring probe Model PH 10 M Plus and measuring probe TP 20 plus various probe accessories Podpfx Aget Hw Nysxegk • RENISHAW Probe Head Controller Type PHC 10 C-3 Plus, also integrated into the workstation • Automatic probe change possible, 6-position probe magazine Model MCR 20 mounted on the table • Mobile hand control panel with progressive control lever (joystick) for manual adjustment of all 3 axes with continuously adjustable travel speeds • Reference sphere for setup on the table, workstation, various clamping devices, etc. Condition: Very good – can be inspected under power in stock, ready for demonstration, was professionally disassembled by a measuring machine specialist at previous owner and reassembled at current location. Delivery: Ex stock – as is and as inspected Payment: Net – upon receipt of invoice.

Stanje: novo, Leto izdelave: 2026, Stroji po meri, prilagojeni vašim proizvodnim potrebam. Naši stroji po meri so natančno zasnovani in izdelani tako, da ustrezajo edinstvenim zahtevam vaših proizvodnih procesov. Ne glede na to, ali se osredotočate na dodelavo, odstranjevanje oksida ali zaobljanje robov, ti stroji zagotavljajo izjemno natančnost in zmogljivost. Psdpfehq Dbxjx Agxegk Dodelava: Dosezite gladko, visokokakovostno površinsko obdelavo različnih materialov ter zagotovite stalno profesionalen in sijoč videz. Odstranjevanje oksida: Učinkovito odstranite površinske okside in tako zagotovite čisto, neonesnaženo površino – ključno za nadaljnjo obdelavo ali nanašanje premazov. Zaobljanje robov: Natančno zaoblite robove po želenem radiju ter s tem izboljšate varnost in kakovost končnega izdelka. Možnosti prilagoditev: Vsak stroj je posebej prilagojen vašim zahtevam in omogoča fleksibilnost pri: Hitrosti obdelave: Nastavljiva prilagoditev hitrosti glede na potrebe vaše proizvodnje. Posebne funkcije: Možne opcije med drugim vključujejo sisteme za odsesavanje prahu in dimov, nastavljive pritiske ter programsko krmiljene konfiguracije za optimizacijo proizvodnega procesa. Zgrajeno za vzdržljivost. Naši stroji po meri so izdelani za dolgo življenjsko dobo in zanesljivo delovanje tudi ob dolgotrajnih proizvodnih ciklih. Primerni za manjše projekte ali serijsko industrijsko proizvodnjo, zagotavljajo vrhunske rezultate leto za letom.

Stanje: rabljeno, Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 730 mm, pomik osi Y: 730 mm, pomik po osi Z: 850 mm, hitro pomikanje X-os: 50.000 m/min, hitri pomik os Y: 50.000 m/min, hitri pomik na osi Z: 50.000 m/min, nazivna (navidezna) moč: 22 kVA, proizvajalec krmilnikov: MORI SEIKI, model krmilnika: MSX-711 IV, obremenitev mize: 500 kg, število mest v zalogovniku orodij: 60, dolžina orodja: 500 mm, premer orodja: 140 mm, teža orodja: 12 g, Horizontal Machining Centre MORI SEIKI NH-5000 DCG/40 The MORI SEIKI NH-5000 DCG/40 is a high-performance horizontal machining centre, engineered to deliver exceptional precision, reliability, and continuous productivity, even during the most complex machining operations. Key features: Year of manufacture: 2010 CNC Control: Mori Seiki MSX-711 IV Machine weight: 12,700 kg Machine footprint (LxWxH): 4,628 x 4,952 x 3,012 mm Spindle: Spindle taper: ISO-40 Max spindle speed: 14,000 rpm Spindle motor power: 18.5 / 22 kW (S1/S6) Working Capacity (axis travel): X-axis: 730 mm Y-axis: 730 mm Z-axis: 850 mm Spindle centre – pallet surface distance: 100 – 830 mm Spindle nose – pallet centre distance: 100 – 950 mm Max workpiece size: Ø800 x 1,000 mm Rotary Table: Table size: 500 x 500 mm Number of stations: 2 (with automatic pallet changer) Maximum pallet load: 500 kg Continuous table rotation: 360,000 positions Feeds: Rapid traverse (X/Y/Z): 50,000 mm/min Pgsdpfx Agowxygzsxek Cutting feed (X/Y/Z): 1 – 50,000 mm/min Tool Changer: Tool taper: MAS BT-40 Shank: 90° Mori Seiki type Tool magazine capacity: 60 positions Max tool diameter: Ø140 mm (with adjacent tools: Ø70 mm) Max tool length: 500 mm Max tool weight: 12 kg Equipment and Accessories: Chip conveyor Coolant collection tank with washing pumps + external tank with paper filter High-pressure coolant pump through spindle line Spindle head chiller and transformer Retractable tool presetting sensor Comprehensive technical documentation (manuals, electrical diagrams, CE declaration) Ideal for advanced machine shops and intensive production environments, the NH-5000 DCG/40 combines structural rigidity with advanced CNC technology, assuring highly complex machining processes with outstanding speed and precision.

Stanje: novo, Leto izdelave: 2025, obratovalne ure: 1 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 4.000 mm, pomik osi Y: 1.000 mm, pomik po osi Z: 1.000 mm, proizvajalec krmilnikov: STYLE CNC Machines, število mest v zalogovniku orodij: 24, proizvajalec motorjev: FANUC, Dostava po dogovoru Ref: 24F048 Leto izdelave: 2025 Stanje: Razstavni eksponat Specifikacije: - X-os: 4000 mm - Y-os: 1000 mm - Z-os: 1000 mm - Glavni motor 26 kW (S6) Pgedpfx Ajw Ty S Ssgxsk - 8000 vrt/min - BT-40 - Avtomatski menjalec orodij (24 pozicij) - Oddaljeni servis (IXON) + mrežna povezava - Močnejša črpalka za hladilno tekočino z brizgalno pištolo - Nadgrajeno na najnovejšo razpoložljivo programsko opremo STYLE

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2020, številka stroja/vozila: PM_1000, Used polishing machine for manual operation. Pgjdpfxefiugus Agxok Drive power: 5.5 kW Polishing wheel diameter: 1000 mm