Električni 4 -kolesni viličar

Still RX60-20

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2017, obratovalne ure: 1.882 h, nosilnost: 2.000 kg, dvižna višina: 4.765 mm, prosto dvigovanje: 1.735 mm, vrsta goriva: električni, tip droga: triplex, gradbena višina: 2.160 mm, širina nosilnega okvirja vilic: 980 mm, dolžina vilic: 1.000 mm, vrsta pogona: Elektro, Električni viličar s 4 kolesi Center teže tovora: 500 Razred ISO: Razred ISO 2 = 1.000 – 2.500 kg Tip dvižnega stolpa: Trojni Prenos: Elektromehanski Stanje: Pripravljen za uporabo in popolnoma funkcionalen Tehnično stanje: zelo dobro Sprednje pnevmatike, tip: Superelastične Sprednje pnevmatike, velikost: 200/50-10 Gbodpozp Spgsfx Adkor Zadnje pnevmatike, tip: Superelastične Zadnje pnevmatike, velikost: 16x6-8 Napetost akumulatorja: 80 V Kapaciteta akumulatorja: 465 Ah Proizvajalec akumulatorja: Hawker Tip akumulatorja: PzS Leto izdelave akumulatorja: 2016 Opis: Poleg tega viličarja ponujamo še druge viličarje in opremo za skladiščenje. Naši viličarji so bili preizkušeni v skladu s standardi FEM4.004. Prosimo, da nas kontaktirate po e-pošti ali po telefonu. Najdete nas tudi na spletni strani hsr-gabelstapler. Seveda odkupujemo tudi vaše rabljene viličarje, tudi če pri nas ne kupujete novega viličarja. Možnost najema s kasnejšim odkupom in financiranja po ugodnih pogojih je na voljo na zahtevo. Z veseljem vam nudimo strokovno in podrobno svetovanje glede naših viličarjev. Stranski premik, 3. ventil, zadnja delovna luč, sprednja delovna luč, polna kabina, popoln prosti dvig, varnostna luč, notranje ogledalo, rotacijska luč, brisalnik, en pedal, LED, sedež.

Stanje: rabljeno, številka stroja/vozila: 006042, Tip nameščene obloge: tanka obloga, močna obloga Leplilni sistem: EVA Godpfswacqlox Adksbr Spojno rezkanje: da Večnamenski agregat: da Zgornji rezkalni agregat: da Maks. hitrost podajanja: 25 m/min Maksimalna debelina plošče: 40 mm Delovni agregati: 9 kos

Stanje: rabljeno, Leto izdelave: 2014, obratovalne ure: 2.438 h, dvižna višina: 4.600 mm, vrsta goriva: električni, proizvajalec motorjev: Elektro, vrsta prenosa: samodejen, Still RX20-14 electric forklift, year of manufacture: 2014, operating hours: only 2,438h! Previous owner: German Armed Forces. Rated capacity: 1,400 kg. Lifting height: 4,600 mm. Triplex mast. Hydraulic sideshift. Engine: [9kW/12hp]. Weight: 3,186 kg. In very good condition! Immediately ready for use. Upon request, we can provide you with a leasing or financing offer. Mr. Mihm (Tel. ...) will be happy to assist you. For further information, please visit our homepage. Subject to errors and prior sale. Power steering, overhead guard. Godpfxsy Ttnhe Adkobr = Further Information = Lifting capacity: 1,400 kg Overall height: 206 cm Please contact Tobias Ebert for further information.

Stanje: rabljeno, Leto izdelave: 2014, obratovalne ure: 1.907 h, dvižna višina: 4.600 mm, vrsta goriva: električni, proizvajalec motorjev: Elektro, vrsta prenosa: samodejen, Still RX20-14 electric forklift, year of manufacture: 2014, operating hours: only 1,907h! Previous owner: German Armed Forces, rated capacity: 1,400kg, lift height: 4,600mm, triplex mast, hydraulic sideshift, engine: [9W/12hp], weight: 2,237kg, in very good condition! Immediately ready for use! Upon request, we can provide you with a leasing or financing offer. Mr. Mihm (Tel. ...) will be happy to assist you. For more information, please visit our homepage. Subject to errors and prior sale! Cabin, rental possible = Further information = Gedpfoy Ttmqox Adksbr Lifting capacity: 1,400 kg Please contact Tobias Ebert for further information.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Single-sided automatic edge banding machine with jointing unit, hotmelt adhesive application to straight workpieces (EVA/PUR glue tank with drain function optional), twin-motor HF end-trim saw station, HF combination milling unit, corner copying unit, chain feed, motorized upper pressure with encoder and double roller upper pressure with ball bearings, extendable workpiece support rail, signal lamp for workpiece sequence, integrated transport control for contactless operation of processing functions, and L-Motion (6 axes) control. Suitable for ABS, PVC, melamine, and solid wood veneer roll material, as well as fixed lengths from 0.4 – 3.0/6.0 mm and workpiece heights from 10 – 60 mm. • Two counter-rotating, program-controlled jointing units with diamond-tipped spiral cutters ensure clean, tear-free jointing of the workpieces before edge banding. • Teflon-coated, quick-change glue pot with 1.5 kg capacity; drip-free with glue reserve feeding from below (excess glue is automatically returned to the pot); precise glue application via glue roller; separate glue roller temperature setting; electronic temperature control with automatic standby function (prevents glue from burning if the machine remains on for longer periods without use). Optional: EVA/PUR glue pot with drainage/cleaning function for quick color change. Optional: Quick-change system for glue pot. • Pressure zone consisting of a driven pressure roller synchronized with the glue roller and two smaller, counter-conical pressure rollers with spring tension, providing optimal adhesion of the edge material to the workpiece. Motorized adjustment of the pressure zone (1xL-Motion). • High-frequency end-trim saw equipped with two HF motors, 0.55 kW, 12,000 rpm, 2 saw blades; pneumatically tiltable from the control panel. • HF combination milling station, two powerful 0.55 kW HF motors with carbide-tipped special cutters. Motorized adjustment of the milling station (4xL-Motion). Gedpfx Adjl Rix Ejkjbr • Corner copying unit: automatic processing of end edges up to 2 mm edge thickness for PVC/ABS edge material. (Not recommended for soft and post-formed profiles). Optional one-sided (front or rear edge) or double-sided corner copying. Motorized adjustment of the corner copying unit (1xL-Motion). • Swiveling control panel with 10" color touchscreen, meter counter, and remote access module. • Standard equipment includes LED lighting and LED-Motion system. • Optional: motorized adjustable infeed rail from the control panel (1xL-Motion). Optional finishing units (3 free slots): - Multi-radius scraper R1+R2, pneumatic ON/OFF control via air cylinder; radius selection (R1/R2) switchable from the control panel. - Surface scraper unit: removes glue residues from the workpiece surface along the glue joint with a gentle scraping cut; pneumatic ON/OFF control via air cylinder. - Buffing unit: 2 motors, 0.09 kW, 1,500 rpm, for super-finish results.

Stanje: rabljeno, Leto izdelave: 2014, obratovalne ure: 2.604 h, dvižna višina: 4.600 mm, vrsta goriva: električni, proizvajalec motorjev: Elektro, vrsta prenosa: samodejen, Still RX20-14 electric forklift, year of manufacture: 2014, battery: 2023, operating hours: only 2,604h, previous owner: German Armed Forces, full cabin, rated load capacity: 1,400kg, fork length: 1,200mm, lift height: 4,600mm, triplex mast, hydraulic sideshift, engine output: 9kW/12hp, weight: 2,342kg, very good condition, immediately ready for use. Leasing or financing offers available on request. Mr. Mihm (phone) will be happy to assist you. For further information, please visit our homepage. Subject to prior sale and errors. Cabin, rental possible = Further information = Gbodpjy Ttlgofx Adkjr Lifting capacity: 1,400kg Please contact Tobias Ebert for more information.

Stanje: rabljeno, Leto izdelave: 2016, obratovalne ure: 271 h, dvižna višina: 4.600 mm, vrsta goriva: električni, proizvajalec motorjev: Elektro, vrsta prenosa: samodejen, Still RX20-14 electric forklift, year of manufacture: 2016, battery: 2016, operating hours: only 271 h, previous owner: German Armed Forces, full cab, rated load capacity: 1,400 kg, fork length: 1,200 mm, lift height: 4,600 mm, triplex mast, hydraulic sideshift, engine: 11 kW / 15 HP, weight: 2,342 kg, very good condition, immediately ready for operation. Leasing or financing options available on request. Mr. Mihm (tel.) will be happy to assist you. For more information, please visit our website. Subject to errors and prior sale. Cab, rental possible. Godpfey Ttk Ajx Adkebr = Further information = Lifting capacity: 1,400 kg Please contact Tobias Ebert for further information.

Stanje: rabljeno, Leto izdelave: 2012, Control: POWER CONTROL PC 20+ Gbedpewwk Dujfx Adksr Panel height (mm): 60 PVC-ABS edge thickness (mm): 3 Solid edge thickness (mm): 12 Feed speed (m/min): 20 Upper motor-driven rubberized belt Manual infeed guide Anti-adhesive unit Straightening unit Bonding with EVA adhesive Edge support plate End trimming unit with automatic tilt adjustment Offset end trimming and corner rounding unit with two motors Linear 2-motor rounding unit Edge scraper blade Glue scraper blade Buffing unit

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2011, obratovalne ure: 9.529 h, nosilnost: 2.500 kg, dvižna višina: 4.220 mm, vrsta goriva: električni, tip droga: teleskopski, gradbena višina: 2.775 mm, dolžina vilic: 1.200 mm, vrsta pogona: Elektro, Električni viličar s 4 kolesi Center teže obremenitve: 500 Razred ISO: ISO razred 2 = 1.000–2.500 kg Tip dvižnega droga: Teleskopski Prenos: Elektromehanski Stanje: Pripravljen za uporabo in popolnoma funkcionalen Tehnično stanje: zelo dobro Sprednje pnevmatike, tip: Superelastik Sprednje pnevmatike, velikost: 23x9-10 Gsdpfx Aezrqvdsdkobr Zadnje pnevmatike, tip: Superelastik Zadnje pnevmatike, velikost: 16x6-8 Napetost baterije: 80 V Kapaciteta baterije: 620 Ah Proizvajalec baterije: HSR Tip baterije: PzS Leto proizvodnje baterije: 2018 Opis: Poleg te naprave ponujamo tudi druge viličarje in opremo za skladiščenje. Naše naprave so pregledane v skladu s standardi delavnice in FEM4.004. Prosimo, kontaktirajte nas po e-pošti ali po telefonu. Najdete nas tudi na spletni strani hsr-gabelstapler. Seveda odkupujemo tudi rabljene naprave, tudi če pri nas ne kupite novega vozila. Na voljo so možnosti nakupa z možnostjo najema in financiranja po ugodnih pogojih. Z veseljem vam bomo strokovno in podrobno svetovali glede naših vozil. Stranski pomik, 3. ventil, zadnja delovna luč, sprednja delovna luč, zaščita stropa, vetrobransko steklo, zaščitna mreža za tovor, notranje ogledalo, ročica, brisalec vetrobranskega stekla, en pedal, LED, sedež.

Stanje: rabljeno, Leto izdelave: 2018, obratovalne ure: 13.714 h, dvižna višina: 5.650 mm, prosto dvigovanje: 1.780 mm, vrsta goriva: električni, tip droga: triplex, dolžina vilic: 1.590 mm, širina vilic: 1.700 mm, skupna višina: 2.460 mm, skupna dolžina: 2.150 mm, skupna širina: 1.140 mm, barva: srebrn, Lastna teža: 3.800 kg Dvižna zmogljivost: 2.000 kg - Letnik izdelave: 2018 - Dokumentacija na voljo: Da - CE-označba prisotna: Da - CE-certifikat prisoten: Ne - Serijska številka: 516231J00163 - Število delovnih ur: 13.714 - Dvižna sila: 2.000 kg - Dvižna višina: 5.643 mm - Višina prehoda: 2.460 mm - Prosti dvig: 1.780 mm - Dolžina vilic: 1.590 mm - Največja širina vilic: 1.700 mm Godpfx Adozdyrxekobr - Najmanjša širina vilic: 530 mm - Število koles: 4 kolesa - Priključki: bočni pomik, nastavljive vilice - Oprema: joystick, delovne luči, polkabriolet kabina, prosti dvig - Steber: triplex - Pogon: električni - Podatki o bateriji: - Znamka/tip: 6 HPzS 750 - Leto izdelave baterije: 2018 - Kapaciteta: 750Ah - Napetost: 48V - Transportne mere: 2.159 mm x 1.149 mm x 2.460 mm (d x š x v) - Transportna teža [kg]: 3.800 kg - Transportni paketi [kos]: 1 Finančne informacije DDV: Navedena cena je brez DDV DDV/možnost odbitka: Za podjetja je DDV odbiten Dostava in odkup možna kadarkoli za vse iz industrijskega področja Tess van den Boom