Separator barvnih kovin / separator vrtinčnih tokov

Steinert NES 150 220 E 5009

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, hladilna zmogljivost: 787 kW (1.070,02 KM), vrsta hlajenja: zrak, skupna masa: 7.056 kg, skupna širina: 2.260 mm, skupna dolžina: 6.500 mm, skupna višina: 2.500 mm, Zračno hlajen chiller YORK YAES 787 kW Hladilna zmogljivost: 787 kW Leto izdelave: 2005 Hladilni krog: 2 kom. Tip hladiva: R134A Kompresorji: 2 kom. York (vijačni) Število ventilatorjev: 10 kom. Dimenzije: 6,50 x 2,26 x 2,50+0,06 m Teža: 7056 kg Todpfxjh E Tpwe Abgjf Stanje: odlično Brez 2 ventilatorjev

Stanje: skoraj kot novo (rabljeno), Set, packed in wooden box, screw and cylinder barrel for 150 mm extruder, grooved feed section, screw with shear and mixing section Tjdpfx Abedm Aghogef

Stanje: rabljeno, Plant: Inclined Plate Clarifier, Lamella Clarifier, Lamella Separator Condition: Used, up to 120 m³/h depending on medium Design: Robust, high-performance construction Material: Stainless steel (VA) on container frame, 30' container, scraper plates made of PP Dimensions: LxWxH 7580x2435x3000 mm Weight: approx. 8,000 kg Principle: The wastewater is fed into the inlet of the inclined plate clarifier and flows downward. Due to the arrangement of the lamella plates in the clarifier, the wastewater is redirected below the plates and flows upwards through the lamella. Solids settle onto the lamella plates and slide downwards along the plates into the sludge hopper. The clarified water is transported to the outlet. Rake mechanism: Optionally, we offer the inclined plate clarifier with a rake mechanism to keep the sludge in a flowable state. Todjppyhtopfx Abgsf Application: Separation of solids and liquids by sedimentation. Inclined plate clarifiers are often used as a preliminary stage before filter presses or decanters for thickening. Pre-thickening of thin sludge allows the filter press to be dimensioned smaller in terms of filter area. The system is in good condition and available for rent or purchase. Inspection at our facility can be arranged by appointment. We also offer new inclined plate clarifiers with a delivery time of approx. 8 to 10 weeks!

Stanje: novo, Bunker conveyor system suitable for feeding balers, shredders, etc. Europe-wide delivery available. Technical specifications: Item 1: Feed hopper Item 2: Feed conveyor, 1.5 kW, belt width: 1100 mm, axle spacing: 3500 mm Item 3: Inclined conveyor, 1.1 kW, belt width: 1100 mm, axle spacing: 4700 mm Standard discharge height: 2800 mm (greater height possible with spacer feet as shown in the illustration) Made to order Tsdpjdxwlqefx Abgef Further information and data available on request

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, HBS 840-44-E Lubjevec popolnoma obnovljen in kot nov Todpfei E Tkwox Abgjf

Stanje: rabljeno, Leto izdelave: 2009, obratovalne ure: 20.536 h, stiskalna sila: 80 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.400 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 600 kg, lastna masa: 16.000 kg, Technical Data – Baler: Manufacturer: Avermann Maschinenfabrik GmbH & Co. KG, Germany Model: AVOS 1410-45/80 Year of manufacture: 2009 Operating hours: 20,536 hours (as of September 2024) Pressing force: 80 kN Specific pressing force: 103.9 N/cm² Feed chute dimensions: 1,400 x 1,000 mm Theoretical cycle time: 12 seconds Theoretical throughput rate: 300 m³/h Bale dimensions: 1,100 x 750 mm (W x H), length variable Drive power: 45 kW Total connected load: 75 kW Tying system: 4-fold vertical, fully automatic Throughput rates (depending on bulk density): — 30 kg/m³: approx. 6.0 t/h — 50 kg/m³: approx. 10.5 t/h — 100 kg/m³: approx. 17.5 t/h Bale weights at approx. 1.2 m bale length: up to 600 kg, depending on material PLC: Siemens S7-300 Tjdju Thypopfx Abgef Display panel: pulsotronic Press dimensions (assembled): 8,610 x 2,400 x 3,835 mm (L x W x H) Transport weight (press): 16 t Special features: • Wear-resistant floor made of HARDOX steel • Special press ram for compacting “difficult” materials and loose bulk goods of small grain size • Switch cabinet with air conditioning • Machine base raised by 200 mm Note: The machine is currently located in our workshop and is undergoing partial refurbishment. We expect the overhaul to be completed by the end of October, after which the machine will be tested and released for sale.

Leto izdelave: 2025, Stanje: novo, številka stroja/vozila: Neumaschine auf Bestellung, Description: - Screening deck system consisting of 1 deck for screening minerals from pre-crushed material; maximum input grain size: 0–100 mm - Screening cut size: 0–30 mm Todod Rbmkepfx Abgsf - Throughput approx. 60 m³/h (material dependent) - Material separation into 2 fractions: 0–30 mm and oversize - To be mounted on customer’s own impact plates or subframe Technical Data:  Screening deck: Length = 3,120 mm; Width = 1,400 mm o External dimensions: Length = 3,300 mm; Width = 2,050 mm o Screening area 4.6 m², number of shafts: 24 units o Drive: 2 x 4.0 kW gear motors o Screening body made of polyurethane (star screen) D 166 / 12 fingers o Screen shafts as plug-in system (easy and cost-effective adjustment to other grain sizes possible) o Bearing lubrication routed to the outside; central lubrication system available as an option at extra cost  Colour: black RAL 9017 / green RAL 6018 or according to customer specification (at extra cost) Delivery time: approx. 20 weeks

Leto izdelave: 2024, Stanje: novo, Air Separators ZIGZAG Application Description: The ZIGZAG type air separator is a device designed for cleaning materials in the waste recycling process. The separator divides light and heavy fractions using a pneumatic method. It is suitable for a wide range of waste materials with particle sizes from 0 to 150 mm. This type of air separator is used for pre-shredded, torn, or very fine materials. Thanks to our unique design, the separator features multi-point adjustment options that are crucial for the purity of the obtained fractions. ZIGZAG type separators are utilized in many fields: - density classification of metal granules - cleaning shredded scrap from light fractions (films, plastics, paper) - removal of floating fractions during WEEE recycling - cleaning of plastics, rubber Tedpjua D Alsfx Abgjf - cleaning of municipal waste and glass - dust removal Construction Description: The ZIGZAG separator consists of individual components mounted on a common support structure. In the first section, the ZIGZAG module is installed. The module features an inspection opening and an adjustable material stream gap. In the second section, there is a cyclone for extracting light fractions. Below the cyclone is a rotary valve with variable speed for the discharge of separated materials. At the top of the assembly is a fan with electronic speed control. The design is partially prepared for loading and unloading via belt conveyors. The separator comes with a control cabinet equipped with a safety system.

Stanje: rabljeno, Infeed cross-section: 1200 x 1600 mm Drive: 110 kW, without gearbox Rotor flight circle: 380 mm Rotor speed: approx. 470 rpm Rotor design: 66 cutter plates on tool holders Screen construction: heavy-duty screen basket, reinforced with ribs Screen perforation: 15 mm Counter knives: with adjustable cutting gap Tedebq Stqopfx Abgjf Machine weight: approx. 5,900 kg

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, skupna masa: 44.000 kg, dolžina rotorja: 2.800 mm, moč: 315 kW (428,28 KM), največja hitrost vrtenja: 87 obr/min, - MERAK 2800-2 with 315 kW - 116PR cutting system - PG190 screen (can be changed according to customer requirements) - Feed hopper - Dust suppression - Electric central lubrication - Hydraulic circuit protection - Overband neodymium magnetic separator – HP Todpougf Dwefx Abgof - Rubberized, bolted track pads on crawler chassis