Sortirni stroj drobilnik ostankov

Steinert ISS Stainless Steel + Allmetall

Stanje: rabljeno, Leto izdelave: 2021, Lindner Urraco 95 DK – Year of Manufacture 2021 – Well-Maintained Condition For sale is a Lindner Urraco 95 DK from 2021 with 7,230 recorded operating hours. The shredder is in a well-maintained, ready-to-use condition. The exact condition can be seen in the photos. The machine is equipped with the DK4 package, featuring a reinforced gearbox and reinforced cutting frame. — Gisdpfxsx Nkhqs Agwop Features / Scope of Delivery • 1 set of armored shafts HW 8/10 with comb scrapers and re-breaking bar, suitable for scrap and waste • 1 set of used shafts HW 8/10 with comb scrapers and re-breaking bar, also for scrap and waste • DK4 package with reinforced gearbox and reinforced cutting frame — Technical Data – Lindner Urraco 95 DK Model: Lindner Urraco 95 DK Year of manufacture: 2021 Operating hours: 7,230 Engine output: approx. 566 kW (approx. 770 HP) Emission standard: Stage V / Tier 4f (depending on configuration) Shaft length: approx. 2,500 mm Shaft diameter: approx. 870 mm Maximum torque: up to approx. 480,000 Nm Machine weight: approx. 46 t Dimensions (L x W x H): approx. 9.2 m x 2.55 m x 3.2 m Undercarriage: tracked chassis, hydraulically driven Applications: scrap, commercial waste, bulky waste, mixed waste, wood, recyclables — Condition: • Well-maintained machine • Fully operational • Sale as inspected on-site Additional Information / Service History The machine has always had a full maintenance and service contract directly with Lindner. All maintenance and service work has been performed professionally according to manufacturer specifications and documented. Notes: • Sale is without any warranty or guarantee. • No returns or renegotiation. • Subject to prior sale. All details are provided without guarantee. The seller accepts no liability for any errors, incompleteness, or changes to the information provided. The sale is exclusively subject to prior sale.

Stanje: rabljeno, Hydraulic Guillotine Shear STEINER Type HTS 30/20 R Machine No. 315 Year of manufacture: 1982 Cutting length: 3050 mm Cutting thickness: 20 mm Backgauge: 800 mm, motorized Motor power: approx. 30 kW Power supply: 400 Volt, 50 Hz - Backgauge with ELGO position controller - Backgauge adjustment via ball screw spindles - SICK light curtain safety system at the front for intervention protection - 3 support arms with ball rollers for material support - Electric foot switch - Spare blades - Oil cooler with air heat exchanger - Very robust machine, extremely stable construction Space requirements (main machine) L x W x H: 4650 x 2610 x 3200 mm Weight (main machine): 27,000 kg Space required for transport (main machine) L x W x H: 4650 x 2610 x 3200 mm Transport space (additional) L x W x H: 3500 x 2450 x 1400 mm Total weight: 27,000 kg Good condition Machine can be inspected at our warehouse in 37235 Hessisch Lichtenau, trial cuts possible. Giodpfx Agod Hxx Aswsp Currently, the hold-downs are being newly sealed; the corresponding price adjustment will be made in the next few days.

Stanje: rabljeno, Leto izdelave: 2019, Sennebogen 835 M-HDS Series E - Tier 4/ EPA Year of construction: 2019 Cummins - EPA - Tier 4/Stage V, 231kw MP34 HDS mobile undercarriage Drive control via 1-way accelerator pedal Solid rubber tyres 16.00-25 (4-way) Joystick steering Additional ballast 0.8 tonnes Cab adjustment E270 Maxcab Gedpfx Aexu U Euegweip Maxcab Industry with front and roof windscreen Air-suspended comfort driver's seat Safety belt / 2 inch Frontguard for windscreen for Maxcab Industry Sun blind for roof window, Maxcab Industrie cab Sunblind for windscreen, Maxcab Industrie cab Radio / Usb, Sd, Mp3, Bluetooth Catwalk side of cabin with railing bolted Railing on upper carriage Boxingring) Sennebogen Hydro-Clean filter for hydraulic oil K18 working equipment - 10.1 M + 7.9 M ( 59’) Generator 20kW 1 Led spotlight On the cab roof To the rear 2 Led headlights on the stick (1 X Left and 1 X Right) 1 Led light on the lower boom

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, For optimal recovery of non-ferrous metals or material purification This extremely powerful machine is primarily used for the processing of municipal waste, shredder materials, household appliances, wood, plastics, glass, IBA and bottom ash, as well as electronic waste. The IMRO non-ferrous metal separator meets the demand for very high recovery rates and high purity levels. Gsdpfx Ajvdqdijgwoip

Stanje: rabljeno, Leto izdelave: 2017, obratovalne ure: 854 h, skupna širina: 2.450 mm, skupna višina: 1.100 mm, skupna dolžina: 1.900 mm, Lastna teža: 800 kg Cena: na zahtevo Gijdpfx Agsxan Utswep - Leto izdelave: 2017 - Dokumentacija na voljo: Ne - Prisotna CE-oznaka: Da - Prisoten CE-certifikat: Ne - Serijska številka: 5037411-000150 - Obratovalne ure: 854 - Transportne mere: 1900mm x 2450mm x 1100mm (d x š x v) - Transportna teža [kg]: 800 kg - Transportni paketi [kos]: 2 Finančne informacije DDV: Navedena cena je brez DDV DDV/obračunavanje razlike v ceni: DDV je odbiten za podjetja Dostava in odkup so možni kadarkoli za vse stroje iz industrijske panoge Yorick Diebels

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Štiriprekatna dozatorska naprava na saneh, mobilna, rabljena, linijski dozator. Vsak lijak približno 20 t, širina nalaganja s kolesnim nakladačem cca 3,65 m, zmogljivost v neprekinjenem delovanju cca 400 t/h. Kompletno z nadgradnjami lijakov, glavni izvlečni trak, ločen dvižni trak 18 m, motorizirano vrtljivo podvozje, vlaženje materiala, senzorji za pomanjkanje materiala. Za izdelavo mineralnih mešanic, nosilnih slojev ipd. Opcija za doplačilo: nova upravljalna enota. Godpfx Agjx Rvc Aewoip

Stanje: skoraj kot novo (rabljeno), The MSP 120 ZK is optimally suited for the crushing and subsequent briquetting of various types of metal chips. The MSP 120 ZK briquetting press with integrated shredder consists of a hydraulic chip briquetting press and a pre-installed crusher, precisely matched to each other. This system enables the size reduction and compaction of chips generated by turning and milling operations. The volume is significantly reduced, and the briquettes are separated from the coolants (coolant emulsion, oil) absorbed during previous machining processes. The system consists of a feed hopper into which the material to be processed is loaded, and an integrated shredder that reduces the chip length. A conveyor system continuously and gradually feeds the shredded chips into the hopper of the chip press via a conveyor belt. There, two augers transport the material into the compaction chamber. The system features a monitored liquid collecting tank and a pump. The cooling fluids can be returned to the production process. Cycle control is managed by a PLC and an electronic level sensor for monitoring the fill level in the hopper. Optionally, a tipping device can be added for manual loading if required. Briquetting Press: Throughput (Aluminum): 15–20 kg/h Throughput (Steel, Copper): 45–60 kg/h Briquette Ø: 60 mm Productivity: 120–180 pcs/h Godpfx Aow R Ranogwjip Specific pressure on briquette: 1,050 kg/cm³ Motor pump power: 7 kW Total installed power: 10 kW Voltage: 400 V / 50 Hz Oil tank: 80 l Dimensions: 1,400 x 1,200 x 1,050 mm Weight: 800 kg Shredder: Cutter shaft: 1 pc Motor power: 5.5 kW Number of knives: 16 pcs Knives replaceable: Yes Knife size: 25 mm Knife material: Hardened steel Shaft length: 400 mm Screen size: 20 mm Hopper diameter: 1,000 mm Hopper volume: 1 m³ Weight: 280 kg Power supply: 380 V Overall system dimensions: 2,820 x 1,862 x 2,065 mm Colour: Textured lacquer RAL 7035 light grey

Stanje: novo, Wir möchten Ihnen Wellen anbieten, die für mittelgroße Schredder mit Seitenkämmen, Brechstange und Kassette ausgelegt sind. LINDNER U75, ARJES VZ750, HAMMEL VB750 / NOVA 75DK: - 5-7-7 - 6-7-7 - 8-7-7 - 10-7-7 MRW 2.85: - 5-8-8 - 6-8-8 - 8-8-8 - 10-8-8 PROTECHNIKA ist ein Unternehmen mit 21-jähriger Geschichte und von Beginn an in der Herstellung von Ersatzteilen sowie kompletten Recyclinglinien tätig. In den letzten Jahren haben wir unser Portfolio um die Fertigung von Zerkleinerungswellen für langsam laufende Schredder erweitert. Durch den Einsatz automatisierter Schweißprozesse und eigener Fertigungstechnologien konnten wir die Produktionszeiten minimieren und gleichzeitig durchgängig hohe Qualität sichern. Die Zerkleinerungswellen sind Serienprodukte, die unter anderem eine OEM-Zusammenarbeit mit Maschinenherstellern ermöglichen. Giedex Hhwdepfx Agwop Was unterscheidet PROTECHNIKA von der Konkurrenz? Ganz einfach: - Zertifizierte 3.1 Materialien - TUV SÜD Rheinland Qualität - ISO 9001 - Automatisierter Schweißprozess / ISO 15613 / ISO 15614 - Schweißerqualifizierungen nach ISO 9606-1 - ISO 9001:2015 - ISO 14001 - Eigenes Konstruktionsbüro, das sämtliche Kundenanforderungen erfüllen kann - Eigene FORSCHUNGS- UND ENTWICKLUNGSABTEILUNG Die Beziehung zu unseren Kunden steht für uns an erster Stelle, denn deren Zufriedenheit ist unser Erfolg!

Stanje: novo, Leto izdelave: 2024, obratovalne ure: 1 h, Funkcionalnost: popolnoma funkcionalen, Wirbelstromabscheider der Magnetic-Serie werden hauptsächlich in der Abfallrecyclingindustrie eingesetzt. Der Einsatz von Wirbelströmen ermöglicht die Rückgewinnung von Nichteisenmetallen (nicht magnetisch) aus losem Abfall, wie Aluminium, Kupfer, Messing usw. Die WPS-Abscheider zeichnen sich durch eine hohe Abscheidegenauigkeit aus, dank der eigenen Lösungen von ZŁOMIARZE, was eine hohe Rentabilität des Abfallrecyclings garantiert. WPS-Abscheider werden eingesetzt zur Rückgewinnung von: - Nichteisenmetallen aus dem Recycling von Elektronikschrott - Nichteisenmetallen aus dem Kfz-Recycling - Metallen aus Gießereiabfällen - Aluminium in Glasrecyclingprozessen - Nichteisenmetallen aus Stahlabfällen - Nichteisenmetallen aus Siedlungsabfällen Gijdpfxeu Dg Uhj Agwop Funktionsbeschreibung: Das vom Schwingförderer zugeführte Material gelangt auf das Förderband des Wirbelstromabscheiders. Das Förderband befördert das Material zum Hochgeschwindigkeits-Magnetrotor. Der Magnetrotor erzeugt ein hochfrequentes Magnetfeld durch ein optimiertes System alternierender Magnetfelder. Das variable Magnetfeld induziert Wirbelströme in Metallen. Diese erzeugen entgegengesetzte Magnetfelder und führen dazu, dass Buntmetalle aus dem Materialstrom herausgeschleudert werden. Ein am Ende des Abscheiders montierter Trenner sorgt für die Fraktionierung des Materials. Der zentrale Magnetrotor wurde so konstruiert, dass er auch kleinste Materialien bewältigt und ermöglicht die Rückgewinnung von Partikeln bis zu einer Größe von 1 mm. Wir bieten auch größere Ausführungen von Wirbelstromabscheidern an – Katalog in den Dokumenten.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2019, obratovalne ure: 3.922 h, Doppstadt Inventhor Type 9 Engine type: Diesel engine Manufacturer: MTU 6R 1300 Emission standard: Stage V / EUROMOT III A Rated power: 390 kW / 530 HP Fuel tank capacity: 1,000 l Discharge Conveyor Width: 1,200 mm Length: 8,500 mm Belt speed: 2.0 m/s Discharge height: 5,050 mm Feed Hopper Loading height: 3,307 mm Drum Number of drums: 1 Drum length: 3,000 mm Drum diameter: 600 mm Drum speed: -5 to 32 rpm Number of drum tools: approx. 42 MACHINE DETAILS Gijdjxcx Snopfx Agwsp Total weight: 33,000 kg Length: 16,786 mm Width: 2,500 mm Height: 5,050 mm Transport width: 2,500 mm Transport height: 3,893 mm Transport length: 9,973 mm Operating hours: 4,724 h FEATURES - Additional equipment: Overband magnet - New stepless drive concept with VarioDirect Drive - No engine load from starting torque due to load-free drum positioning - Self-cleaning function for the wrapper - Flexible shredding concept with different package options - New door and housing design for improved maintenance access - Quick conveyor unfolding mechanism at the touch of a button - State-of-the-art monitoring system - Reduced noise emissions Machine is refurbished and immediately available!!!!