Polpriklopnik s premičnim dnom

STAS bioSTAR 91,3 cbm

Stanje: rabljeno, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.513 mm, širina tovornega prostora: 2.475 mm, višina nakladalnega prostora: 2.821 mm, prostornina tovornega prostora: 913 m³, prva registracija: 10/2024, naslednji pregled (TÜV): 10/2025, skupna širina: 2.550 mm, Oprema: ABS, bioSTAR 91.3 m³ Basalt grey Chassis type: moving floor Fifth wheel load (national, t): 12 Axle load (national, t): 8 Axle distance (mm): 1310-1310 Coupling height (mm): 1150 Chassis width (mm): 1200 Loading width (mm): 2475 Chassis series: 135 Technically permissible gross weight: 39 = 12+9+9+9 t Wheelbase (WB) moving floor trailer (mm): 7850 Internal height front (mm): 2641 Internal height rear (mm): 2821 Loading length (mm): 13513 Volume (m³): 91.3 Overall width (mm): 2550 Overall length (mm): 14000 Chassis Chassis material: steel Tyre size: 385/65R22.5 Neck height (mm): 217 Axles: JOST Brake type: JOST - DCA-T7 Offset (ET): 120 Option: 1st axle with start-up assist Brake pad wear indicator connected Tyre pressure monitoring: Wabco Trailerpulse Air suspension: ECAS with lift/lower valve Lowering of air suspension via Smartboard, as well as lift/lower valve Pneumatic coupling head: European palm coupling Rims: Speedline Diamond Wheel nut covers: chrome with STAS logo Landing gears: Weweler steel geared landing gears, type Weweler, with compensating feet, single-sided operation and 2 speed levels Operating console: EBS control, left in direction of travel, behind the axles Lighting manufacturer: Aspöck Lighting type: EUROPOINT III - LED 2 LED reversing lights, mounted at the rear left and right in the direction of travel on the lamp bracket Work lights (operated via switch): 2 LED reversing lights at the front left and right in the direction of travel, mounted in the area of the landing gears Air connection in the toolbox Aluminium access ladder 3.80 m, right side in direction of travel Moving floor system: Cargo Floor Air and electrical console mounted centrally in direction of travel with support arm Lighting unit protection: one-piece mudguard Body Front wall inclination (°): 90 Rear wall inclination (°): 90 Rear door type: swing doors A-shield: folding, mounted on rear wall right side in direction of travel Cover plate between floor and front wall: fixed aluminium plate and PVC strips Type of king pin plate: standard Front wall profile: 3 mm - 2 mm Side wall profile: 3 mm - 2 mm, smooth inside and outside, double-wall profiles 600 mm wide, 30 mm thick Wear plates rectangular 1500 x 1000 x 4 mm Moving floor system control: radio remote Cargofloor control type: CF 500 SL-C - E-CONTROL Number of floor profiles: 21 Floor profile type: 8 mm ribbed End plate moving floor: stainless steel With additional plastic guides underneath floor profiles End cap reinforcement: stainless steel shoes over end caps of floor profiles, with aluminium wear plate above end caps Oil temperature sensor for moving floor system Clean-out wall Clean-out wall type: aluminium Clean-out wall: brushes Storage of clean-out wall: 6 wheels with bi-directional cleaning (floor) Rear wall: aluminium Rear door locking: 1x locking rod per door half No. of handles door leaf left: 2 handles per locking rod No. of handles door leaf right: 1 handle per locking rod Additional rear door lock: single-acting pneumatic Operation of additional lock: manual via operation on side of instrument panel Rear door ram protection: aluminium ramp buffer full width of rear wall Tensioning gear for curtain tensioning: tensioning gear with hand grip, mounted on underside/side wall of body Spriegel type: steel, straight, can be folded down Lredpfx Asxp Tkfogwju Number and position of

Stanje: rabljeno, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.513 mm, širina tovornega prostora: 2.475 mm, prostornina tovornega prostora: 91 m³, prva registracija: 08/2024, naslednji pregled (TÜV): 09/2026, skupna širina: 2.550 mm, Oprema: ABS, bioSTAR 91.3 m³ Basalt Grey Chassis Type: Moving Floor Kingpin Load National (t): 12 Axle Load National (t): 8 Axle Spacing (mm): 1310-1310 Fifth Wheel Height (mm): 1150 Chassis Width (mm): 1200 Loading Width (mm): 2475 Chassis Series: 135 Technically Permissible Gross Weight: 39 = 12+9+9+9 t Wheelbase (Moving Floor Trailer) (mm): 7850 Interior Height Front (mm): 2641 Interior Height Rear (mm): 2821 Loading Length (mm): 13513 Volume (m³): 91.3 Total Width (mm): 2550 Total Length (mm): 14000 Chassis Tire Size: 385/65R22.5 Neck Height (mm): 217 Axles: JOST Brake Version: Disc Brake Brake Type: JOST - DCA-T7 Offset (ET): 120 Option First Axle: Start Assist Start Assist optimized with activation via button in truck (button installation not included) and by pressing brake pedal three times Option Third Axle: Without Brake Pad Wear Indicator: Connected Tire Pressure Monitoring: Wabco TrailerPulse Air Suspension: ECAS with lift and lower valve Lowering of air suspension via Smartboard and lift/lower valve Pneumatic Coupling Head: European Palm Coupling Rims: Speedline Diamond Wheel Nut Caps: Chrome with STAS logo Landing Gear: Weweler as steel-geared landing gear, type Weweler, with compensating feet, single-sided operation, and 2 speed stages Underrun Protection: Fixed underrun bar Lighting Manufacturer: Aspöck Lighting Type: EUROPOINT III - LED 2 LED reversing lights, mounted left and right on rear lamp carrier Work Lights (switchable): 2 LED reversing lights, mounted left and right at front in area of landing gear Hydraulic Coupling: Rotary coupling Hydraulic Coupling Position: Connection point on front wall (additional connection point at landing legs) Hydraulic positioning: Pressure return left, return right (CON) Air Connection: In toolbox Aluminum Access Ladder 3.80 m, mounted right in direction of travel Brush and Shovel Holders: Three each, mounted left in direction of travel Moving Floor System: Manufacturer Cargo Floor Lrodoxdqbkspfx Agwju Air and Electrical Console: Mounted centrally with gantry Lighting Unit Protection: One-piece mudguard Body Front Wall Angle (°): 90 Rear Wall Angle (°): 90 Rear Wall Type: Swing Doors A-Shield: Foldable on rear wall, mounted right in direction of travel Cover Plate between floor and front wall: Fixed aluminum plate and PVC strips Fifth Wheel Plate Type: Standard fifth wheel plate Front Wall Profile: 3 mm - 2 mm Side Wall Profile: 3 mm - 2 mm, smooth inside and outside, double-wall profiles 600 mm wide - 30 mm thick Wear Plates: Rectangular 1500 x 1000 x 4 mm Floor System Operation: Radio remote control Cargofloor Control Type: CF 500 SL-C - E-CONTROL Floor Profile Type: 8 mm ribbed Moving Floor End Plate: Stainless steel With additional plastic guides beneath the floor profiles End Cap Reinforcement: Stainless steel shoes over end caps of floor profiles, with aluminum wear plate above end caps Oil Temperature Sensor for moving floor system Complete Discharge Wall Rear Wall: Aluminum Swing Door Design: 1/2 to 1/2, with central locking crossbar Door Wing Opening: Right door wing opens first (STAS manufacturer’s choice) Locking crossbar: Swiveling Crossbar Material: Aluminum Rear Door Locking: 1x rotary bar/door half

Stanje: novo, skupna masa: 36.000 kg, največja dovoljena obremenitev: 28.020 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.513 mm, širina tovornega prostora: 2.475 mm, prostornina tovornega prostora: 91 m³, Leto izdelave: 2024, Oprema: ABS, Kingpin load National (t) 12 Axle load National (t) 8 Axle spacing (mm) 1310-1310 Coupling height (mm) 1150 Chassis width (mm) 1200 Internal height front (mm) 2641 Internal height rear (mm) 2821 Overall width (mm) 2550 Overall length (mm) 14000 Chassis steel 385/65R22.5 Axles SAF Brake type SAF - SBS 2220 (Haldex) Offset (ET) 120 Option: 1st axle with traction aid Activation of traction aid via button in truck (installation of button not included in equipment) and by pressing the brake pedal three times Brake pad wear indicator not connected Tire pressure monitoring Wabco Trailerpulse Lowering of air suspension via Smartboard and raise/lower valve Pneumatic coupling head European palm coupling Rims steel Landing gear Steel gearbox landing gear mounted at the front of the chassis, Type JOST MODUL, single-sided operation, 2-speed Control console EBS control on left in direction of travel, behind the axles Push floor control console on left in direction of travel, behind axles Tool box on left in direction of travel, behind axles Lighting Aspöck Ljdpjwbxxhsfx Agweru Lighting type ECOLED II Reversing lights 2 pcs. LED reversing lights at rear, left and right on lamp bracket in direction of travel 2 pcs. LED reversing lights at front, left and right in direction of travel Hydraulic coupling rotary coupling Hydraulic coupling - size 1 Hydraulic coupling - female Hydraulic coupling - hose 3,000 mm Hydraulic coupling - connection at bulkhead (additionally at support legs) Standard Smartboard Aluminium access ladder 3.80 m - right side in direction of travel Position of broom and shovel holder on left side underrun protection Loading manometer Ø 100 mm - at front on chassis With two plastic chocks incl. holder Moving floor system manufacturer Cargo Floor Air/electrical console central in direction of travel Body Rear wall type swing doors Cover plate between floor and front wall: fixed aluminium plate and PVC strips Front wall profile 3 mm - 2 mm Side wall profile 3 mm - 2 mm, smooth inside and outside, double-walled profiles 600 mm wide - 30 mm thick Distance from lower corner profile to upper side wall at rear 2649 Floor system operation remote control Cargofloor Control type CF 500 SL-C - E-CONTROL Number of floor profiles 21 Floor profile type 10 mm ribbed Moving floor end plate aluminium With additional plastic guides below floor profiles Type of residue discharge wall aluminium Residue discharge wall with brushes Residue discharge wall stainless steel handles for easy movement Residue discharge wall mounted on 6 wheels with bi-directional cleaning (loading floor) Rear wall aluminium Swing door division 1/2 to 1/2 with door end crossbar Door wing opening right door wing opens first Door end crossbar pivoting design Material door end crossbar aluminium Rear door locking 1x rotary bar/door half Number of door handles - left wing 2 pcs., right 1 pc. per rotary bar Fixing of opened door wings spring retainer with plastic protection Rear wall seal with standard rubber seal Additional rear wall locking pneumatic single-acting Operation of additional lock manually via side operation on instrument carrier Tail door bumpers aluminium bumpers across full width of rear wall Tarp tensioning gear with hand grip, mounted on underside/side wall of body Type of curtain...