Švicarska stružnica

STAR Micronics Ecas20T

Stanje: rabljeno, Leto izdelave: 2010, Premer vretena 20 mm Premer vretena 24 mm Iodpjzrh Ecjfx Ah Uoih Dolžina obdelave 350 mm Hitrost vrtenja 10.000 vrt/min Nadzorni sistem CNC Siemens 840Di/Yaskawa Os C 0,01° Postaja za odvzem 20 mm Hitrosti vrtenja 10.000 vrt/min Os C 0,01° Hitrost podajanja 20 m/min Revolver (x-kratni) 3 x 8 + (3x os Y) Skupna poraba moči 5,5 kW Teža stroja približno 4.850 t Potreben prostor približno 3,2 x 1,75 x 1,9 + FMB m CNC avtomat za dolge obdelave Star ECAS 20T (12 osi) z 2 vreteni in 3 revolverji ter nakladalni magazin FMB.

Stanje: rabljeno, Leto izdelave: 2008, Technical Details: Swing diameter over bed: 600 mm Swing diameter over cross slide: 540 mm Turning length: 550 mm Z-axis travel: 800 mm X-axis travel: 260 mm Control: Fanuc 18i-TB Spindle bore: Ø 73 mm Bar capacity: Ø 65 mm Spindle speed: 0 ... 5000 stepless rpm Spindle torque: max. 250 Nm Iedpfsvvtpxjx Ah Uoih Rapid traverse in X/Y/Z axes: X/Z: 30 m/min / Y: 12 m/min Rapid traverse speed C-axis: 1000 rpm Tool turret – number of stations: 12 (Sauter) Operating pressure: 6.0 bar Electrical specification – voltage/frequency: 3 x 400 V / 50-60 Hz Operating pressure: 6 bar Total power requirement: 40 kVA Machine weight approx.: 5.7 t Machine dimensions approx. LxWxH: 2.2 x 3.4 x 2.4 m Chip conveyor dimensions LxWxH: approx. 2.9 x 0.6 x 0.55 m (0.38 t) Chip tray dimensions LxWxH: approx. 1.6 x 1.3 x 0.25 m (0.2 t) Transport dimensions machine: approx. 3.3 x 1.9 x 2.2 m The machine features a C-AXIS, E-axis, Y-axis, and W-axis Driven tools can be used at all turret stations Distance spindle to sub-spindle = 1050 mm Sub-spindle: A2-6, travel 800 mm, spindle Ø 105 mm, torque 250 Nm Control cabinet equipped with Rittal cooler With hinge belt chip conveyor Chip tray Compressed air gun Machine is offered WITHOUT chuck as shown!

Stanje: dober (rabljeno), Leto izdelave: 2011, Ref. no.: 10598 Manufacturer: HELLER Model: MC 2000 Year of manufacture: 2011 Control type: CNC control Control system: Siemens 840 D sl Location: Halberstadt Country of origin: Germany Machine no.: 50XXXX X-travel: 800 mm Y-travel: 800 mm Z-travel: 1000 mm Work spindle torque (25% ED): 242 Nm Tool holder: SK 40 Number of magazine tool stations: 54 Tool magazine capacity: 80 pcs. Spindle speed: 10,000 rpm Spindle motor power: 17 kW High-pressure pump: 50 bar Spindle speed range – main spindle: 10,000 rpm Number of pallets: 2 Pallet size (L x W): 630 x 500 mm Machine weight approx.: 13,000 kg Spindle run time: 7,000 h Operating hours: 14,000 h Setup station: 4 x 90° Hydraulic pressure: 200 bar Additional information: - The machine has been measured - Geometry is in first-class condition - Spindle runs somewhat rough - Clamping towers and tool holders included - 2 additional clamping towers - 2 spare pallets - 2-axis servo tool changer - Scraper belt conveyor for dry machining Iijdpfx Ahex Hn D Rs Uoh - Cool white light in working area - Central cooling unit for motor spindle and control cabinet - Operating device at the setup station - NC-controlled rotary table - Clamping hydraulics Machine can be inspected under power by prior arrangement

Stanje: dober (rabljeno), Razdalja med konicami: 1000 mm Višina konic: 175 mm Blagovna znamka CNC: FANUC Iiedpfotrgn Tox Ah Uoh Model CNC: Oi-TD

Leto izdelave: 2020, stanje: novo, Oxygen and temperature measurement in molten metals Iedegqr A Djpfx Ah Uoih

Stanje: rabljeno, TECHNICAL DATA - Max. bar diameter: 12.7 [mm] - Main spindle stroke (fixed/driven guide bushing): 130/80 [mm] Isdpfx Aheuhav De Usih - Spindle power: 4 [kW] - Rotational speed: 12,000 [rpm] - Upper turret: 6 positions - Lower turret: 6 positions - Number of driven positions on turret: 6 - Max. diameter in sub-spindle: 12.7 [mm] - Sub-spindle rotational speed: 12,000 [rpm] - Dimensions: 2850 x 1100 x 1480 [mm] - Operating hours: 12,408 [h] - Main spindle hours: 9,400 [h] EQUIPMENT - CNC control TRAUB TX 8i - Bar feeder LNS Alpha ST 320 - C axis on main spindle and sub-spindle - Brake for main spindle and sub-spindle - Parts catcher with conveyor belt - Fire protection system - Coolant tank with pump and chiller unit - Chip conveyor - Various fixed and driven tool holders

Stanje: rabljeno, Leto izdelave: 1987, Technical details: Ijdpfx Ahomf Aw As Uoih Number of spindles: 8

Stanje: rabljeno, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of Manufacture: 2007 Rolling Force: max. 24 tons Tool Diameter: max. 270 mm Roll Spindle Diameter: 69.85 mm Tool Bore Diameter: 70 mm (nominal diameter) Mounting Length, Tool Length: max. 180 mm Workpiece Diameter: max. 50 mm Hydraulic Motor Power: 3 kW Roll Drive Motor Power: approx. 5.5 kW Mains Connection: 400 Volt, 50 Hz, 10 kW - Pivoting roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gear shift - Hydraulic system integrated in machine frame - Operating manual with electrical diagram Space requirements (L x W x H): 2000 x 1450 x 190 mm Weight: approx. 3 tons Very good condition Plunge rolling: The thread rolling dies, with the same pitch as the workpiece, form the thread by pressing into the workpiece up to the nominal diameter. The thread length is at most as long as the width of the rolling dies. Through-feed rolling: Used when the thread length exceeds the width of the rolling dies. Through-feed dies have three functional zones – lead-in, calibration, and lead-out. Isdpfsuz If Nex Ah Uoih Knurling Rolls: These rolls have no pitch and are swiveled at the pitch angle of the profile to be rolled. Pitch Rolls: Pitch rolls have a profile with a pitch, differing from knurling rolls. The sum of the pitch angle and swivel angle determines the pitch angle in the finished workpiece.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2025, obratovalne ure: 10 h, Funkcionalnost: popolnoma funkcionalen, merilno območje os X: 200 mm, merilno območje osi Y: 200 mm, merilno območje os Z: 200 mm, trajanje garancije: 12 meseci, potovalna razdalja osi X: 200 mm, pomik osi Y: 200 mm, pomik po osi Z: 200 mm, vhodna napetost: 230 V, dolžina podajanja os X: 200 mm, dolžina pomika po osi Y: 200 mm, dolžina podajanja os Z: 200 mm, Oprema: Na voljo je tipska ploščica, dokumentacija / priročnik, osvetlitev, Completely overhauled multisensor measuring device Mahr MS 222 (optical measuring instrument) LIKE NEW, including acceptance certificate prior to delivery and free shipping within Germany* Iiodpfx Aeglp Nqjh Ueh Factory-refurbished premium multisensor measuring center with warranty and guarantee, rebuilt in 2025. INCLUDES latest software update, 18 months of free software update service, free lifetime software hotline and user support. Delivery with factory service or via shipping company, worldwide delivery possible! Online or on-site demonstrations with customer parts as well as application-specific consulting provided by accredited Profitech inspection laboratories during project planning. Complete service available upon request: – Delivery, installation, commissioning, norm-compliant accuracy verification, certification, and comprehensive acceptance documentation. Customized training programs also available as online courses. Rental, hire-purchase, or financing available directly via Profitech, with no bank required. Measuring device can be configured individually to customer needs. Measuring range: 200 x 200 x 200 mm Load capacity (glass plate): 10kg Scale resolution: 0.1μm Max. traverse speed: 150mm/s Dimensions: 900 x 750 x 950mm Machine weight: 170kg Control cabinet weight: 90kg Length measurement uncertainty: According to VDI/VDE 2617-6 E2 (X,Y) = (3.2 + L/125) μm Optional extension: Renishaw probe system (TP20, TP200, SP25) available on request Retrofit 2025 Including PC and software Maximum traverse speed: 150mm/s Dimensions: 900 x 750 x 950 Weight: approx. 90 kg Sample image by manufacturer *Commissioning, on-site calibration, and training are not included

Stanje: rabljeno, Thread rolling machine - ORT RP18 2-roll thread rolling machine Swiveling spindle Overhauled with Siemens PLC See video Iiedpfx Ajuua H Reh Ueh The machine is powered and available in our warehouse Test run possible