Prednja plošča

Stankoimport 400 mm

Leto izdelave: 1994, stanje: zelo dobro (rabljeno), številka stroja/vozila: 04.2398, Manufacturer: Arthur Klink Model: RIW 10 x 1500 x 500 Machine No.: 04.2398 Year of manufacture: fully refurbished by the manufacturer in 1994 Weight: 3,700 kg Tensile force: 10,000 kg (100 kN) Max. stroke: 1,500 mm Max. workpiece diameter: Ø 500 mm Gedpsgyd T Esfx Ahbekd Broaching speeds: steplessly adjustable from 1 m/min up to 6 m/min Return speed: steplessly adjustable up to 20 m/min Power supply: 400V / 50Hz

Stanje: dober (rabljeno), Leto izdelave: 1991, Funkcionalnost: popolnoma funkcionalen, dolžina podajanja os X: 3.000 mm, skupna dolžina: 4.000 mm, skupna masa: 8.000 kg, Stroj prihaja iz servisa in ima s seboj veliko dodatne opreme. Gkedpfx Ahoz Iif Hobod

Stanje: rabljeno, Leto izdelave: 1965, Groove width 3 - 90 mm Drawing length 430 mm Working speed 4 - 12 m/min Groove length 400 mm Return speed 15 m/min Gjdpfstv Iatjx Ahbjkd Total power requirement 5.5 kW Machine weight approx. 1.4 t Space requirement approx. 1.3 x 1.7 x 1.5 m with various drawing needles and guides

Stanje: dober (rabljeno), Leto izdelave: 1978, premer struženja nad prečnim suportom: 430 mm, izvrtina vretena: 82 mm, premer struženja: 640 mm, višina središča: 320 mm, širina na sredini: 3.000 mm, poteza s peresom: 250 mm, skupna dolžina: 5.600 mm, skupna širina: 1.300 mm, skupna višina: 1.900 mm, premer nihanja nad prečnim premičnikom: 430 mm, širina postelje: 430 mm, Premer struženja v izrezu: 850 mm, največja hitrost vrtenja: 1.800 obr/min, vrtljajska hitrost (min.): 9 obr/min, Konvencionalni L+Z stružnica, višina konic 320 mm, razdalja med konicama 3000 mm, preboj Ø 82 mm, 27 hitrosti 9 - 1800 vrt/min, motor 18,5 kW, nos vretena DIN'', dimenzije 560x130x190 cm, teža ca. 5000 kg; Oprema: digitalni prikaz na 2 oseh, hladilna naprava, 3-čeljustna glava FORKART Ø 400 mm, rotirajoča stružna konica, hitroizmenljiv nosilec orodja RAPID z različnimi vložki, po ena fiksna in sočasna luneta z valjčnimi glavami. Gsdpfxozin Nis Ahbokd

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Manufacturer: Arthur Klink Year of manufacture: approx. 1960 Type: Horizontal Broaching Machine Model: RH 10-50 Machine no.: 241 Weight: 3,700 kg General / Technical Data: Used horizontal hydraulic internal broaching machine in age-appropriate good condition, with heavy-duty manual tool feeder. Gkedpfer A Hdgox Ahbed Broaching stroke: 1,500 mm Tensile force: 10,000 kg (100 kN) Mounting in drawbridge: Ø 85 mm cylindrical Through-hole in clamping table: Ø 100 mm Clamping surface (workpiece area): Ø 460 mm Max. workpiece diameter: approx. 750 mm (limited by the tool feeder tray) Cutting speed: hydraulically stepless adjustable from 1.0 m/min to 7 m/min Return speed: hydraulically stepless adjustable from 5 m/min to 30 m/min Required installation space (W x D x H): approx. 6500 mm x 950 mm x 1,400 mm (without working area) Power supply: 380 Volt, 50 Hz Connected load: 8 kW Features: • Mechanical-hydraulic control for broach & return stroke • Integrated coolant/lubricant system • Manually operated tool feeder • Broaching slide with puller head mount, guided on both sides with flat guides • Adjustable tensile force limiter Accessories: • 1 universal puller head for flat shanks, 3 mm to max. 25 mm wide • Adapter sleeve for drawbridge from Ø 85 mm to Ø 63 mm Remarks: The machine is suitable for keyway production with flat broaching tools as well as for profile broaching. Due to the machine bed and the robust tool feeder, the machine is well-suited for heavy-duty profile broaching tools. The machine is used and in very good condition for its age. The machine is held in stock and can be inspected under power. The machine has not been refurbished, neither technically nor visually, but is ready for immediate use. Profile broaching heads are largely available used upon request, depending on DIN standard, dimensions, and stock availability. Direct contact details and further information can be found in the attached PDF document.

Leto izdelave: 2000, stanje: rabljeno, Swing diameter 530 mm Turning length 1500 mm Control Fagor Center height 260 mm Swing diameter 475 mm Gkjdpfx Ajiu A Dashbjd Swing diameter over flat bed 530 mm Swing diameter over cross slide 315 mm Bed width 350 mm Spindle bore 80 mm Spindle taper MK5 Number of spindle speeds 2 Speed range 0-650 / 650-2500 rpm Feed range 0 - 7000 mm/min Rapid traverse 10 m/min Quill diameter 72 mm Quill stroke 180 mm Machine weight approx. 3.5 t Required space (L x W x H) approx. 3.50 x 1.50 x 1.80 m

Leto izdelave: 1963, stanje: rabljeno, Technical Details: Ram Stroke - max.: 150 mm Workpiece Diameter - max.: 250 mm Slot Width: 50 mm Feed Rate: 10 m/min Stroke Adjustment: yes Supply Voltage: 380 V Work Table: Ø 250 mm Total Power Requirement: 6.0 kW Machine Weight approx.: 1.05 t Machine Dimensions (LxWxH) approx.: 1.2 x 0.8 x 1.6 m Application: For internal keyway machining of flanges Pull Broach Specifications: Gksdpfxju Ng T Uj Ahbsd - Total Length = 650 mm - Width = 10; 20; 30; 50 mm - Pull Length = approx. 150 mm Lubrication is via the pull broaches. Equipment includes, for example: 4x various pull broach guides (5; 22; 32 and 50 mm) 50x various flange holders 23x broach holders, shank 18 mm; 12x shank 22 mm; 7x shank 26, 30, 40, and 45 mm including accessories, see photo for comparison As per description.

Stanje: nepreverjeno (rabljeno), Forst RF 16 Broaching Machine (Internal) -WKG 1371- Technical data: Manufacturer: Forst Model: RF 16 Max. pulling force: 16 t Max. stroke: 1200 mm Max. cutting speed: 5.6 m/min Max. workpiece diameter: Ø 700 mm Gjdpshu E N Defx Ahbokd Max. tool diameter: Ø 120 mm Workpiece mount bore: Ø 70 mm Note: Control valve is missing

Stanje: novo, Clutches and Brakes for Russian Machine Tools We offer for sale original electromagnetic and mechanical clutches, brakes, and complete clutch assemblies for Russian machine tools such as: 1M63, 1M65, 1H65, 165, 1512, 1516, 1525, 1L532, RT-117, DIP-300, and many more. Our stock also includes spare parts such as: - Electromagnetic clutches and brakes, clutch discs, and brush holders; - Complete electromagnetic and mechanical clutches for 1M63, 16K20, clutch shafts, friction plates, and discs; - Parts, clutches, and brakes for milling machines 6P82T, 6P83, etc.; - Pneumatic clutches for presses of the KD2128, KD2328, and other series, manufactured in Russia. Most of the above-mentioned products are available from stock; for the rest, we offer the shortest possible delivery times. Gedpfsv Sb Eysx Ahbekd

Stanje: skoraj kot novo (rabljeno), številka stroja/vozila: 26879f, Outside diameter: 260 mm Passage: 70 mm Gedpfod Hyf Hex Ahbokd with direct mounting, short taper 55027: size 6 Overall height: 90 mm