Ravnalni brusilnik

STANKO 3D725

Stanje: rabljeno, Leto izdelave: 2008, x-travel 2000 mm y-travel 620 mm z-travel 520 mm Table size 2500 x 600 mm Max. workpiece weight 2000 kg Tool holder SK40 Control system HEIDENHAIN Spindle speeds 30 - 8000 rpm Feed rate 45 m/min Rapid traverse 45 m/min Total power requirement 20 kW Machine weight approx. 10,500 kg Space requirement approx. 5400 x 3300 x 3000 mm Equipment: Dcodpfx Adoulnbkjtjk - Heidenhain iTNC 530 control - Tool magazine with 30 stations - Chip conveyor - Sieve filtration system with ICS (internal coolant supply) - Operating manual Optional (on request): - Radio probe (Heidenhain) - Tool measurement system (Heidenhain TT 160)

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2006, potovalna razdalja osi X: 5.500 mm, pomik osi Y: 1.400 mm, pomik po osi Z: 1.000 mm, največja hitrost vretena: 5.000 obr/min, hitrost vretena (min.): 15 obr/min, širina mize: 1.200 mm, dolžina mize: 6.000 mm, RepairFIT by Dornhöfer The Difference. Including installation & commissioning! Year of manufacture: 2006 Capacities / Travel paths: Longitudinal (X): mm 5,500 Vertical (Y): mm 1,400 Transverse (Z): mm 1,000 Clamping table: Length: mm 6,000 Dcodpfsy Tkgbox Adtek Width: mm 1,200 Number of T-slots on table surface: 12 Width of T-slots: mm 22 Distance between slots: mm 100 Max. workpiece weight: kg 13,500 NC rotary table: Position: Right, flush-integrated into table surface Clamping surface: Ø mm 1,000 Positioning accuracy: ° 360x0.001 Max. workpiece weight: kg 3,500 Number of T-slots: 9 T-slot size: mm 22 Distance between T-slots: mm 100 Paint finish: RAL 7035 light grey / RAL 5011 steel blue Tool holder: ISO 50, DIN 69871 AD Pull stud: DIN 69872 Form A Main drive: Drive power: 100% duty cycle 28 kW Spindle speed range: Spindle speed: min⁻¹ 15 – 5,000 Torque: Nm 815 Feeds: X-, Y- and Z-axis mm/min 2 – 10,000 Max. rapid traverse rate: X-, Y- and Z-axis mm/min 25,000 Max. feed force: N 10,000 Footprint FLC6000: m (approx.) 11.0 x 5.6 Overall height: m (approx.) 3.5 Weight: kg approx. 35,000 HEIDENHAIN iTNC 530 HSCI Automatic MTE milling head Diagonal Automatic tool changer Chip conveyor Coolant system with 70 bar & (IKZ) RepairFIT is our proven solution for a profitable entry into our product lines. Machines available in this range are sourced through a strict selection process and subjected to a comprehensive inspection (deep-dive check) by us. After intensive cleaning, all identified visible defects and faults have been professionally repaired by our expert service team.

Stanje: rabljeno, x-travel 500 mm y-travel 400 mm z-travel 400 mm O F F E R We can offer you, subject to prior sale and errors excepted, the following from stock on a non-binding basis: DECKEL MAHO CNC Universal Milling Machine Type: DMU 50 M Year of manufacture: 1998 _____ Working area: - Travel X-axis: 500 mm - Vertical travel Z-axis: 400 mm - Cross travel Y-axis: 400 mm - C-axis – table rotation, manual: 360° - B-axis – table tilting, manual: ° Table size: Ø 700 x 500 mm Table tilting range: ° Table rotatability: 360° Max. workpiece weight: 200 kg Distance between table and spindle approx.: 550 mm Reach between machine and spindle min/max: 2 – 6 mm Tool holder: SK 40 Spindle speeds steplessly programmable: 20 – 4,500 rpm Feed rates / rapid traverse max.: 5,000 mm/min AC main drive 0%/40% duty cycle approx.: 9 / 13 kW Total power approx.: 15 kW - 400 V - 50 Hz Weight approx.: 3,000 kg Accessories / Special equipment • 3-axis path control HEIDENHAIN TNC 124 with display and direct input of all data, including electronic handwheels for all 3 axes. • All 3 axes in the milling head, allowing “irregular” workpieces to be machined on the stationary table. • Rotary table, 360° manually rotatable, +/-° manually tiltable (each with clamping). Digital display of tilt angles integrated into the control. • Simple coolant system, attached control cabinet (SIEMENS equipment). • Pneumatic tool clamping, various tool holders, operating manuals, CE certificate, etc. Condition: Good to very good! Ideal for training or single-part production! Click here for a video of the machine: Delivery: Ex stock, immediately available, FCA Metzingen Payment: Net - upon receipt of invoice Dcjdpfxev Td Els Adtek Always a large selection of milling machines in stock – please let us know your requirements!

Stanje: dober (rabljeno), Leto izdelave: 1993, Ravnalna brusilka ELB Letnik: 1993 Velikost magnetne mize: 1500x550 mm Dcjdpeygtiwsfx Adtek Z avtomatskim pomikom v navpični smeri Z napravo za profiliranje brusnih plošč Rezervoar za hladilno tekočino s papirnatim trakom Veliko brusnih plošč

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, X-travel 2,500 mm Y-travel 3,000 mm Z-travel 1,250 mm Control HEIDENHAIN iTNC530 Spindle speeds – stepless up to 22,000 rpm C-axis ±300° Swiveling head ±110° Tool holder HSK 63 A Tool changer with 50 positions Total power requirement 130 kW Machine weight approx. 53.5 t Installation dimensions approx. 7.6 x 7.3 x 5.7 m This ZIMMERMANN FZ33c is immediately available and in good condition. – NEW spindle installed 6 months ago Description: Technical specifications of the system and working areas X-axis 2,500 mm Y-axis 3,000 mm Z-axis 1,250 mm A-axis ±110° C-axis ±300° Including vibration sensor Including bearing temperature sensor Including rotary feedthrough for internal high-pressure coolant (IKZ) 5-axis path control: Heidenhain iTNC 530/manual pulse generator HR520, 15" TFT color display Dsdpfozak Hgex Adtsck Extraction system LTA Industrial Air Cleaning Machine enclosure roofing Tool changer 50 positions, chain magazine, rear of the machine Chip conveyor, discharge 60° left, front end Probe not included!!! Blum laser tool measurement "Control NT-Micro" Clamping table Length x Width x Height: 2,500 x 3,250 x 400 mm Table load 8,000 kg/m² (max. 16,000 kg) T-slots, longitudinal 18H12 T-slot spacing 250 mm Dimensions and Weights Required space (without peripherals): approx. 7,600 x 7,300 x 5,650 mm Total weight approx. 53,500 kg Electrical specifications Voltage (three-phase): 400 V Frequency: 50 Hz Compressed air connection (on-site) Required pressure: 6 bar Average air consumption: approx. 15 m³/h (depending on machine equipment) Linear axes drives Rapid traverse X, Y, Z axes: 60 m/min Axis acceleration X, Y, Z axes: up to 5 m/s² Rotary axes drives – VH30 Rapid traverse A, C axes: 360 °/s Axis acceleration A, C axes: 700 °/s² Resolution A, C axes: 0.0001 Linear axes accuracy – according to VDI / DGQ 3441 Positioning accuracy X-axis P = 0.026 mm Y-axis P = 0.028 mm Z-axis P = 0.020 mm Repeatability X-axis Ps = 0.015 mm Y-axis Ps = 0.016 mm Z-axis Ps = 0.010 mm Measurement system resolution (interpolated) A, C axes: 0.0001° Rotary axes accuracy – VH30 Positioning accuracy A, C axes P = 12" = 0.0033° Repeatability A, C axes Ps = 8" = 0.0022° Milling head VH30 2-axis milling head: VH30, Milling spindle Siemens Weiss Spindle power S1 (100% duty cycle): 60kW Spindle speed: 22,000 rpm, 95 Nm, HSK-A63 External fork head dimensions L x W approx. 500 x 600 mm Nominal torque rotary axes closed-loop A: min. 1,200 Nm C: min. 1,047 Nm Clamped A and C axes: 3,000 Nm (Grease-lubricated for life with automatic re-lubrication system) Swivel axis – spindle nose: 326 mm Tool holder: HSK 63 A Tool clamping: spring clamp Tool release: hydraulic Admissible tool weight: 4.5 kg (manufacturer specification) Coolant supply external and internal Coolant/lubricant delivery (emulsion) at the face of the milling spindle with band filter system Capacity 1,500 l Pump 1: 40 l/min at 20 bar Pump 2: 20 l/min at 40 bar Blow air at the face of the milling spindle

Stanje: zelo dobro (rabljeno), Leto izdelave: 1997, Romunski stružnica SARO SPS 1250x9000 Proizvajalec: Saro Targoviste Leto izdelave: 1997 Premer vpenjalne glave: 1250 mm Največji premer obdelave nad ležiščem: 1250 mm Premer vretena: 250 mm Razdalja med konicama: 9000 mm Največji premer obdelave nad prečnim suportom: 920 mm Dcedsy Icbaepfx Adtek Največja teža obdelovanca med konicama: 15.000 kg Brusni nastavek na voljo! Video stroja v delovanju na voljo Teža okoli 25 ton

Stanje: dober (rabljeno), Leto izdelave: 1995, premer zgornjega valja: 330 mm, najv. debelina pločevine: 23 mm, Manufacturer: IMCAR Model: SIHR Year of manufacture: 1995 Dodpfswpku Dsx Adteck - Extended end for profile bending rolls (Pipe & T-Angle) - Centralized lubrication - Digital readout for side roll position - Fully hydraulic machine - Hydraulic drop end - Hardened rolls Specifications Metric / US Standard Roll width: 3100 mm Plate thickness at 3x top roll diameter: 18 mm Plate thickness at 5x top roll diameter: 23 mm Pre-bending thickness: 20 mm Top roll diameter: 330 mm Side roll diameter: 310 mm Number of rolls: 3 Bending speed: 0 - 5 Side roll adjustment: 200 mm/min Number of driven rolls: 2 Power: 15 kW Dimensions (approximate) Length: 5250 mm Width: 1700 mm Height: 1700 mm Weight: 11,900 kg Please note: The information on this page is provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Therefore, it does not constitute representation or terms of contract. We strongly recommend verifying all critical details.

Stanje: dober (rabljeno), potovalna razdalja osi X: 3.500 mm, pomik osi Y: 2.000 mm, pomik po osi Z: 800 mm, obremenitev mize: 12.000 kg, skupna višina: 3.900 mm, skupna dolžina: 7.200 mm, skupna širina: 5.200 mm, dolžina mize: 1.800 mm, širina mize: 1.600 mm, hitrost pomika os X: 8.000 m/min, hitrost podajanja osi Y: 8.000 m/min, hitrost podajanja os Z: 8.000 m/min, največja hitrost vrtenja: 2.000 obr/min, Namizna vrtalno-rezkalna naprava TOS VARNSDORF - WHN 13 CNC MACH-ID 9612 Dedjy H Dahopfx Adteck Proizvajalec: TOS VARNSDORF Tip: WHN 13 CNC Krmiljenje: Heidenhain TNC415 X-os: 3500 mm Y-os: 2000 mm Z-os: 800 mm W-os: 1000 mm Dolžina mize: 1800 mm Širina mize: 1600 mm Obremenitev mize: 12 t Hitrost vrtenja: 2000 obr./min Moč: 37 kW Vpenjanje orodja: ISO50 ISO/Bt/Mk Pomik X-os: 8000 mm/min Pomik Y-os: 8000 mm/min Pomik Z-os: 8000 mm/min Pomik W-os: 8000 mm/min Dolžina: 7200 mm Širina: 5200 mm Višina: 3900 mm Teža: 34.500 kg Prosimo, upoštevajte: Podatki na tej strani so bili po naših najboljših močeh pridobljeni od nas in kjer je mogoče, od proizvajalca. Informacije so podane v dobri veri, vendar za točnost ne moremo jamčiti. Zato ne predstavljajo nobenih zagotovil ali pogodbenih pogojev. Priporočamo, da pred nakupom preverite vse pomembne podrobnosti.

Stanje: pripravljen za uporabo (rabljen), Mașină de rectificat ghidaje SFBZ 1800x4000 Lungime maximă de rectificare, mm: 4000 Lățime maximă de rectificare, mm: 1800 Distanța între coloane, mm: 2200 Dcedpfx Aeuug A Eedtek Înălțime maximă de rectificare, mm: 1250 Dimensiuni masă, mm: 4000 x 1800 Dimensiuni maxime ale pietrei de rectificat, mm: 630 x 100 x 305 Greutate maximă piesă de prelucrat, kg: 15.000 Greutate mașină, kg: 56.000

Stanje: rabljeno, Leto izdelave: 2010, Technical Details: X-axis travel: 800 mm y-axis travel: 685 mm z-axis travel: 630 mm C-axis: 360° (faceplate table) Control system: Siemens 840D Power Line Spindle speed: 10,500 – 20,000 rpm Spindle torque: 180 Nm Tool holder: HSK-A63, DIN 69893 Tool magazine with: 40 positions Number of tables: 2 Table swivel range +/-: 120° each (A-axis) Table clamping surface: 280 x 275 mm Table load capacity: 320 kg Interface: RS232 Spindle operating hours: 38,700 h Total power requirement: 37 kW Machine dimensions approx. LxWxH: 4.0 x 4.4 x 3.0 m Chip conveyor dimensions LxWxH: 2.1 x 1.05 x 1.5 m Coolant system dimensions LxWxH: 1.3 x 1.6 x 1.95 m CNC machining center – 5-axis machining center Clamping table for 4th and 5th axis (swivel ±120° left/right, swivel speed 50 rpm, and rotary table with faceplate Ø 280 mm/200 rpm) Max. workpiece size 940 x 650 mm for/on table with Knoll chip conveyor, model 750 K-1/150; year of manufacture 2009 Coolant system Bürener with paper belt filter, belt width 700 mm; year of manufacture 2009 Both control cabinets equipped with Rittal cooling units Various accessories such as different clamping fixtures by HILMA and Chick, etc., can be offered separately. i.D. Dcjdpfxeytcf Uo Adtek *