Voziček za orodje

STAHLGRUPPE SG 56

Leto izdelave: 2009, obratovalne ure: 11.720 h, Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2008/065, 1 nosilec za odjemanje 1 nosilec za vodni utor 7 nosilcev za čelno brušenje Hedpfxsw Exx As Ag Tji 3 zgornji posneti robovi 3 spodnji posneti robovi konsola za razširitev mize smer teka traku od desne proti levi

Stanje: rabljeno, Technical Details: Swing diameter over bed: 350 mm Swing diameter over cross slide: 200 mm Turning length: 560 mm Centre height: 170 mm Spindle bore: Ø 32 mm Spindle speed range: 36...1,800 / 8 steps rpm Feed range x-axis (longitudinal): 0.02..0.8 m/min Feed range y-axis (facing): 0.01..0.4 m/min Tailstock quill taper: MT 4 Tailstock quill travel: 140 mm Total power requirement: 5.5 kW Machine weight approx.: 2.0 t Machine dimensions (LxWxH) approx.: 2.1 x 1.1 x 1.4 m Precision Lathe by Mikromat - Travel of carriage: longitudinal = 580 mm; cross slide = 170 mm; top slide = 130 mm - Workpiece holding via 3-jaw chuck Niles Ø 160 mm, speed 2,800 rpm Hodpfx Agsvadd Is Toi - Quick-change tool post: Multifix Equipment: Coolant pump 4 machine feet Copying attachment

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, obratovalne ure: 990 h, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: trifazni, skupna višina: 3.900 mm, vhodni tok: 63 A, skupna dolžina: 9.500 mm, skupna širina: 4.500 mm, moč: 15 kW (20,39 KM), Oprema: dokumentacija / priročnik, Pelletizing plant for a wide range of materials, such as wood, Miscanthus, agricultural by-products and waste products (hay, straw, corn stalks, etc.), and feed. This is a complete plant built on a base frame and consisting of the following components: - Raw material storage bin, 4m³, including agitator. This has been expanded by approx. 3–4m³ using wooden panels. - Intermediate auger to the hammer mill - Hammer mill (11 kW) for processing wood chips or other materials - Inclined mixer for material homogenization including moisture measurement, dosing, and level control - Dosing container for pressing aids, feeds into inclined mixer Hodpfsxv Dkcex Ag Toi - Dosing screw conveyor for optimal material feed to the press (speed-controlled) - Press, 15 kW, including full indicator, temperature monitoring, and discharge chute - Conveyor belt to the dedusting screen - Dedusting screen with material outlet at 3 m height The system is designed for easy extension with a second press, each 15 kW. The entire plant is centrally operated via Siemens PLC with touch display. All parameters are monitored to ensure the press is safely shut down in case of faults. Remote maintenance allows operation and monitoring of the press from any PC. The chip dryer, shown on photo 2 mounted on the wall with discharge and control unit, is also for sale. Please contact us for further details.

Leto izdelave: 2024, Stanje: novo, Make: DURMA Model: MS 2504 Year of manufacture: 2022 Cutting length: 2550 mm Sheet thickness: 4 mm Control system: EZM9910 Operating hours: 0 Cutting angle: 1°30' Strokes per min.: 42 Motor power: 7.5 kW Backgauge range: 750 mm Table width: 450 mm Table height: 800 mm Dimensions (LxWxH): 3200x2300x1350 mm Weight: 3780 kg Hsdpfx Agsd R Er Dj Tji Standard equipment: - EZM9910 control unit - Programmable backgauge range 750 mm via control unit - Plastic inserts for hold-downs - 1 side gauge and 2 sheet support arms - Finger guard - Portable foot switch with emergency stop - Spring-loaded stop in T-slot of support arms - Recirculating ball screw - Table plates with ball rollers - Upper blade with 2 cutting edges - Lower blade with 4 cutting edges - CE marking Optional equipment: - Adjustable angle stop 0–180° The machine can be inspected and demonstrated at our showroom in Staufenberg by appointment at any time. Additional machines are available and ready for demonstration at our Staufenberg location. Further information is available on request.

Stanje: novo, Number of drawers: 10 pcs. Net weight: 162 kg Dimensions (L x W x H): 1200 x 800 x 1050 mm Workshop trolley with 30 mm thick solid wood worktop. Heavy-duty ball-bearing drawers (double bearings). All drawers can be opened 100%. Equipped with a scratch- and impact-resistant powder coating. Each drawer is fitted with a non-slip mat. All drawers are fitted with a drawer lock. Hjdpeu Imlusfx Ag Tei Doors feature magnetic closure and lock. Tool trolley is equipped with 10 drawers and a cabinet with 2 doors. 2 x 125 mm heavy-duty swivel castors with brakes. 2 x 125 mm heavy-duty fixed castors. 1 x robust handle made of solid steel. 3 x locks for all drawers and doors.

Stanje: generalkompletno obnovljen (rabljeno), Druck: 150 t Hubweg: 140 mm Hsdpfogd H Tpox Ag Tsi Tischgröße: 510 x 530 mm

Stanje: novo, Bernardo Horizontal Bandsaw HBS 275 - 400 V Technical Specifications Hodjd Du T Iopfx Ag Tsi Cutting capacity round 90°: 225 mm Cutting capacity square 90°: 200 x 200 mm Cutting capacity flat 90°: 245 x 150 mm Cutting capacity round 45°: 160 mm Cutting capacity square 45°: 160 x 160 mm Cutting capacity round 60°: 100 mm Cutting capacity square 60°: 100 x 100 mm Working height: 910 mm Saw blade dimensions: 2480 x 27 x 0.9 mm Cutting speeds 400 V: 45 / 90 m/min Coolant pump S1 100%: 100 W Motor output S1 100%: 1.1 kW Motor input S6 40%: 1.5 kW Voltage: 400 V Machine dimensions (L x W x H): 1430 x 720 x 1700 mm Weight approx.: 190 kg Scope of delivery • Saw blade • Workpiece stop • Base frame • Band tension pressure gauge • Quick-action vice • Coolant system • Hydraulic lowering cylinder • Motor protection switch • Automatic shut-off

Leto izdelave: 2012, Stanje: zelo dobro (rabljeno), številka stroja/vozila: MBHF-KBK1, DEMAG KBK overhead crane system, crane runway dimensions approx. 12m x 3.5m Other dimensions available upon request! Load capacity / lifting capacity: 125 kg (0.125 t) Technical specifications of the system: Crane runway made of Demag KBK1 rails System will be delivered complete: KBK rails, rail connectors, trolleys, end plates, cable festoon system, power supply, brackets/suspenders, etc. Incl. 1 bridge with 125 kg Demag DC-COM chain hoist Crane is dismantled and available immediately Hodpfxspiarns Ag Tei Very good used condition, see pictures Item location: 75053 Gondelsheim Shipping by freight forwarder or collection by appointment only Demag KBK1, KBK2, and KBK3 rails are in stock! Other KBK systems with load capacities from 125 kg to 1600 kg are also available. Please enquire about your crane runway with required cantilever load and dimensions.

Stanje: zelo dobro (rabljeno), Ansemi parallel lathe, model Mono FAP 325 ES, center distance 1500 mm, center height 325 mm, spindle bore 65 mm, motor power 18 kW, overall dimensions (mm): 3300x1200x1700 h, weight 3260 kg Hedpfx Aswcd Hmjg Tsi

Stanje: novo, Distance between spindle and table: 470 mm Total power requirement: 2.2 kW Approx. weight: 1,200 kg Dimensions (LxWxH): Length 2,400 mm, Width/Depth 2,160 mm, Height 2,300 mm Spindle speed: 60–4,200 rpm - Heavy-duty design made from high-quality Meehanite cast iron - High rotational accuracy thanks to tapered roller bearings, measured at less than 0.01 mm in the quill - Stepless speed control - Forward/reverse operation for thread cutting - X and Z axes with adjustable 55° dovetail guideways - Y-axis with flat guideway - Drilling-milling head tiltable ±45° - Coolant system - Forward and reverse operation - Automatic quill feed, 3-step (0.04 – 0.15 mm/rev) - Motorized feed in X, Y, and Z axes - Precision microfeed - Milling spindle with precision bearings - Mechanical spindle brake - Drilling depth scale and stop - Cross table with T-slots and coolant groove - Centralized lubrication - Height-adjustable safety shield with microswitch for optimal operator protection from flying chips and parts - Robust and large cross table, precision-machined surface with T-slots MF 4-B: - Cross table load capacity: 300 kg - Large travel distance: X / Y / Z axis 740 mm / 330 mm / 320 mm Dimensions and weights Length: 2,400 mm Width/Depth: 2,160 mm Height: 2,300 mm Weight: 1,200 kg Drilling and milling capacity Max. face mill diameter: 76 mm Max. shank cutter diameter: 25 mm Drilling capacity in steel (S235JR): 24 mm Continuous drilling capacity in steel (S235JR): 20 mm Electrical connection Total connected load: 3 kW Supply voltage: 400 V Phase(s): 3 Ph Current type: AC Mains frequency: 50 Hz Horizontal table Length: 254 mm Width: 1,370 mm Max. vertical spindle-table distance: 405 mm T-slot size: 16 mm Number of T-slots: 3 T-slot spacing: 63 mm Max. load capacity: 300 kg Horizontal spindle Overhang: 0–420 mm Coolant system Coolant pump drive power: 90 W Motor(s) Vertical spindle normal operating power: 2.2 kW Standards and approvals Standard: DIN EN 55011 EMC class: C2 Travel Hsdjd H Hhzepfx Ag Tji X-axis manual: 820 mm Y-axis manual: 410 mm Z-axis manual: 400 mm X-axis automatic: 740 mm Y-axis automatic: 330 mm Z-axis automatic: 320 mm Vertical spindle Overhang: 0–420 mm Spindle mount: ISO 40 DIN 2080 Speed range: 60–4,200 rpm Number of speed ranges: 2 Speed regulation control: mechanically stepless Swivel range milling head X-Y plane: 90° Swivel range milling head Z-X plane: 45° Quill diameter: 86 mm Quill stroke: 127 mm Quill feed: 0.04/0.08/0.15 mm/rev Milling head travel Z-axis: 470 mm VPE: 1