Električni verižni dvig, električni dvižni mehanizem, žerjav 2000 kg, verižni dvižni mehanizem, elek

STAHL T510-8 / 2.0 2/1

Leto izdelave: 1991, stanje: dober (rabljeno), številka stroja/vozila: 44070/91-180102, 4 zložljivi žepi Njdpfog I I N Iex Altjld 1 mehanizem za obdelavo robov

Leto izdelave: 2018, stanje: skoraj kot novo (rabljeno), Dumeta hydraulic height-adjustable welding positioner 500 kg load capacity, height-adjustable welding positioner with through-hole 100 - 200 mm Table diameter: 700 mm Nlsdpfshua Dqsx Alted Horizontal height: min. 0.6 m, max. 1.2 m Tilted height: min. 0.40 m, max. 1.0 m Rotation speed: 0.11 - 1.25 rpm Weight: 750 kg Tilting angle up to 135° Hand and foot remote control with speed display Very robust construction

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, 600 kg load capacity height-adjustable welding positioner with through bore 100 - 200 mm Table diameter 700 mm Horizontal height min. 0.65 m, max. 1.25 m Tilted height min. 0.45 m, max. 0.95 m Speed from 0.01 – 1.1 rpm Tilting angle up to 135° Nodpfx Ajd Anz Rjltjld Hand and foot remote control with speed display Very robust construction

Leto izdelave: 2009, stanje: dober (rabljeno), številka stroja/vozila: 120P1109, OFFER 21407 Motorized Vessel/Drum Rotator with Rail-Mounted Carriage Technical Specifications: - Total load capacity (powered + idler unit): 40,000 kg - Load capacity per vessel rotator: 20,000 kg - Workpiece diameter approx.: 500 – 3,500 mm - Support roller center distance adjustable via trapezoidal-thread spindle - Roller diameter: 500 mm - Roller width: 150 mm - Powered unit with dual-side drive - Infinitely variable rotation speed - Handheld remote for forward and reverse operation - Drive: 400 V - Both units mounted on rail carriages - Required space for powered unit: approx. W 3,800 x H 1,150 x D 1,350 mm - Required space for idler unit: approx. W 3,600 x H 1,150 x D 1,350 mm - Weight powered unit: approx. 2,500 kg - Weight idler unit: approx. 1,800 kg Nedehcnhmepfx Alteld

Stanje: novo, Bernardo Drill Bit Grinding Machine DG 32 Pro Nsdpfjgd H U Uox Altold Specifications Drill bit diameter: 2 – 32 mm Point angle: 90° – 135° Speed: 4800 rpm Motor power: 0.25 kW Voltage: 230 V Length: 350 mm Width: 210 mm Height: 305 mm Weight approx.: 32 kg Scope of delivery • Diamond grinding wheel SBC • ER 20 collets, 3 – 12 mm, set of 10 (3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 / 11 / 12 mm) • ER 40 collets, 13 – 32 mm, set of 20 (13 / 14 / 15 / 16 / 17 / 18 / 19 / 20 / 21 / 22 / 23 / 24 / 25 / 26 / 27 / 28 / 29 / 30 / 31 / 32 mm) • Collet holders ER 20 and ER 40 Features • Includes a point thinning device for better centering of the drill bit tip on the workpiece and reduced required feed force • 30 ER collets included, suitable for clamping intermediate sizes • Additional station for grinding the drill bit clearance angle • Universally adjustable point angle from 90° to 135° • Rotor with precision ball bearings ensures smooth operation • Fast, precise results thanks to easy operation • Vibration-free running due to high dead weight and rubber feet

Leto izdelave: 2025, stanje: kot nova (razstavni stroj), air-cooled process chiller: Refrigerant R32 Cooling capacity 72 kW at 7/12°C, internal P3 pump, integrated 410 l buffer tank, winter package for outdoor installation rated for ambient temperatures down to -25°C, includes variable-speed fans Nlodpfxsf H A Eye Altsd generous Dixell display with protective cover,

Stanje: rabljeno, 3-axle truck trailer, low-loader trailer MÜLLER MITTELTAL type AZP Curtainsider low-loader, low-loader trailer, low-loader for machinery transport Nsdpfx Aljt N Antsteld First registration: 2001 Total mileage: approx. 350,000 km Gross vehicle weight: 24,000 kg Curb weight: 5,500 kg Payload: 18,500 kg Platform height: 840 mm Load height under the curtain frame: 3,200 mm Platform length: 7,450 mm Overall length: 9,150 mm Overall width: 2,550 mm Overall height: approx. 4,050 mm Axle load front: 8,000 kg Axle load middle: 8,000 kg Axle load rear: 8,000 kg Tyres: Michelin 215 / 75 R17.5 (135/133J XTE 2+ TL) - Rear swing doors at sideboard height - Curtain frame with EDSCHA roof system - Curtain frame easy to dismantle (usable even with the curtain frame removed and the curtain moved forward) - Spare wheel mounted on the front wall - Separate raising and lowering of front and rear axles - Middle axle as lift axle - Drawbar – extendable in several stages - Very sturdy lashing rings on the outer frame and in the centre of the vehicle - ALU loading ramps, length 268 cm, width 410 mm, height 130 mm (surcharge EUR 2,000 net) The vehicle was purchased as a new vehicle by us, i.e. from first ownership. The trailer has been deregistered since 2025.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, Product Description: Cormak 2-ton gantry crane is a specialized industrial machine designed for moving heavy loads within factory halls. The crane consists of several components, including a load-bearing frame, a trolley, and additional parts that facilitate easy, safe, and precise horizontal movement of loads, as well as their lifting and lowering with hooks. This model stands out primarily due to its durability and stable construction, enabling use under heavy industrial conditions. The crane is also torsion-resistant, thanks to additional reinforcements applied in its structure. One of the key features of the crane is its four return rollers, which ensure effortless movement of heavy loads. These rollers are highly wear-resistant and robust, guaranteeing a long service life. Another important element is the integrated parking brakes that ensure safe stopping of the crane at any position. The height adjustment is straightforward and safe when the crane is unloaded, using two locking screws per support. The structure of the crane is robust and stable, and its user-friendly operation makes it an ideal solution for companies needing an efficient and reliable machine for moving heavy loads. Furthermore, a variety of optional accessories enables the crane to be adapted for an even wider range of applications in diverse industrial sectors. Thanks to its efficiency and precision, the gantry crane is a versatile working tool that can be further equipped with wire rope or chain hoists. When used with a pulley block, the crane with a hoist or chain enables even more precise and effective handling of heavy loads. As a result, it finds application in multiple industries, such as construction, metallurgy, and the chemical sector. With the gantry crane, tasks such as warehousing, assembly, loading and unloading, and repairs can all be performed with high accuracy and safety, leading to increased work quality. Technical Specifications: Capacity: 2000 kg Double T-beam: 100 x 180 mm Height: 2400 mm – 3600 mm Width: 2360 mm Weight: 168 kg Nedporidh Nefx Altsld Crane supplied without hoist shown in the pictures.

Stanje: rabljeno, Jeklena konstrukcija za dvigalne naprave Širina: približno 8,5 m Dolžina: približno 7,95 m Naprava je razstavljena Naprava se prodaja »kot je«. Nlodebruzgepfx Altjd Ogled: Vabimo vas, da si ogledate izdelek – preprosto nas kontaktirajte in se dogovorite za termin. Pozor: brez garancije, brez možnosti vračila ali zamenjave.

Stanje: rabljeno, Technical Details: Length: 750 mm Height: 800 mm Welding current: 120 Machine weight approx.: 180 kg Dimensions (L x W x H), Welding unit: 0.75 x 0.52 x 0.8 m Dimensions (L x W x H), Compressor: 1.2 x 0.5 x 0.9 m Plasma Cutting Machine Cutter: Manufacturer Jäckle, Year 2005 - Cutting capacity: 30 kVA - TIG / MMA welding - Cooling type: F - Incl. torch package, 6.0 meters - Incl. ground cable, 12.0 meters Nlsdpsu R A Dljfx Altod OPTIONALLY available for sale: Piston compressor: Manufacturer Schneider Type Universal 650-60D, Year 1993 - Filling capacity: 500 l/min - Flow rate: 616 l/min - Compression pressure: 10 bar - Max. power: 4 kW - Incl. compressed air hose, approx. 4 meters - Mobile on two wheels