Žerjav nadstrešek Žerjav Notranji žerjav Žerjavska steza

Stahl Portalkran Brückenkran Kettenzug NL 500Kg Stahlbau 9 x 5,7m IPE300 HEA200

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, Measuring dimensions X/Y/Z: 800mm/1000mm/700mm, max. workpiece weight: 800kg, measuring accuracy: 0.0005mm, repeatability: 0.002mm, measuring table dimensions X/Y/Z: 1040mm/1780mm/250mm, rotary-swivel head: Renishaw PH 10T Plus. The PH 10T was replaced in 2023. Documentation available. On-site inspection possible. Knodpfx Aou Ur Sqebhed

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 83 mm, stružna dolžina: 1.000 mm, premer struženja: 570 mm, premer struženja nad zgornjim sanežem: 340 mm, premer tulec: 80 mm, hod vretena: 200 mm, skupna masa: 3.200 kg, zunanji premer vpenjalne glave: 250 mm, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Machine is in very good condition. Available immediately! Knsdpfx Abewxw S Ijhed Can be tested under power.

Stanje: rabljeno, Leto izdelave: 1975, Technical Details: Swing diameter over bed: 500 mm Swing diameter over cross slide: 260 mm Turning length: 950 mm Centre height measured in bed: 220 mm Centre distance: 1000 mm Spindle speeds: 11.2 – 2240 rpm / 24 steps Spindle bore: 62 mm Tailstock quill travel: 210 mm Longitudinal feeds: 0.045 – 1.6 mm/rev – 32 steps Cross feeds: 0.02 – 0.71 mm/rev – 32 steps Total power requirement: 11 kW Knjdpfx Aev A Sqhjbhed Approx. machine weight: n/a t Approx. machine dimensions (LxWxH): 3.3 x 1.2 x 1.6 m The machine is in very good condition (very quiet spindle operation) and available ex location Leipzig. Top slide swivels 360° 3-jaw chuck Ø 315 mm with jaws (internal/external) for speeds up to 2000 rpm. Thread cutting: metric, module, imperial Chip guard Chuck guard (mechanical) MULTIFIX toolpost with Ø 40 mm boring bar holder Chip tray Coolant supply with pump Leadscrew protection Machine feet UVV (accident prevention regulation) pre-installed *

Leto izdelave: 2002, Stanje: dober (rabljeno), številka stroja/vozila: SIKBK, DEMAG KBK Crane System – Crane Runway, approx. 10x6m Load Capacity / Lifting Capacity: 500 kg (0.5 t) Technical Data of the System: • Crane runway made of Demag KBK2 rails • System is delivered complete: KBK rails, rail connectors, trolley carriages, end stops, cable festoon system, suspension brackets/hangers, etc. • Including Demag DK2 500 kg chain hoist Crane is dismantled and immediately available. Kjdomqf Nbspfx Abhjnd Used condition, see photos. Item location: 75053 Gondelsheim Shipping via freight carrier or pick-up by appointment only. Demag KBK1, KBK2, and KBK3 rails in stock! Other KBK systems also available: load capacities from 125 kg to 1600 kg. Please inquire about your required crane runway with overhang and dimensions.

Stanje: novo, Leto izdelave: 2025, *TFON Leveltech® Stroj za izravnavanje serija -Modeli: M-5560, M-5511, M-5513, M-5516 -Konstruirani za natančno izravnavanje materialov v razponu debeline od 1,0 mm do 15,0 mm, ti modeli ponujajo prilagodljivost glede širine materiala in napredne kontrolne funkcije za optimalno zmogljivost. -Deblina materiala: 1,0 mm – 15,0 mm -Maksimalna širina materiala: M-5560: 600 mm. M-5511: 1.100 mm. Knjdjhwb Uwepfx Abhed M-5513: 1.300 mm. M-5516: 1.500 mm. Minimalna dolžina materiala: 110 mm Prilagoditev razmika izravnave: servo hidravlika / PLC nadzor Teža stroja: M-5560: 12.000 kg M-5511: 15.000 kg M-5513: 18.000 kg M-5516: 19.000 kg Dimenzije stroja (D × Š × V): M-5560: 2.800 × 2.905 × 1.950 mm M-5511: 3.300 × 2.905 × 1.950 mm M-5513: 3.500 × 2.905 × 1.950 mm M-5516: 3.700 × 2.905 × 1.950 mm

Leto izdelave: 1990, Stanje: nepreverjeno (rabljeno), Pressure: 125 tons (2 x 63) Infinitely adjustable working speed: 0–10 mm/sec Return speed: 20 mm/sec Clearance between uprights: 950 x 550 mm Table surface area, front access: 950 x 820 mm Table surface area, side loading: 1220 x 550 mm Ram surface area: see table dimensions Maximum installation height: 700 mm Stroke: 500 mm Knjdpfxogy Hzps Abhod Weight: 5,500 kg Height: 2,900 mm Drive power: 18.5 kW 2 hydraulic cylinders with precision synchronous control Infinitely adjustable electronic stroke limitation

Stanje: rabljeno, Leto izdelave: 2004, Technical details: Swing diameter over bed: 850 mm Swing diameter over cross slide: 580 mm Turning length: 4000 mm Centre distance: 4000 mm Faceplate diameter: 800 mm Control system: Siemens 810D Spindle speed: 1 - 1600 rpm / 2-step Spindle torque: 6000 Nm Feed drive AC: X = cross + Z = longitudinal: 16,000 / 20,000 N Rapid traverse x-axis: 4 m/min Rapid traverse y-axis: 7 m/min Spindle bore: 130 mm (Spindle nose DIN 55027 size 11) Operating hours / On-time: to be read out h Tailstock quill taper: ISO MK 6 Tailstock quill stroke: 350 mm Max. workpiece weight between centres: 5,000 kg Max. workpiece weight unsupported: 1,800 kg Knjdpfxeu Ix Ize Abhsd Interface: RS 232 / V24 Operating voltage: 400 V / 50 Hz Control voltage: 24 V DC Total installed power: approx. 52 kW Machine weight approx.: 14.0 t Machine dimensions (LxWxH) approx.: 2.6 x 9.1 x 2.5 m Cycle lathe with Siemens cycle control Motor: 37 kW, rated speed 1,500 rpm; max. speed 6,500 rpm; torque 235 Nm two gear ranges Range II: spindle torque 258.9 to 1,364.6 Nm Range I: spindle torque 1,050.4 to 5,536.1 Nm Feed drive: three-phase servo drive 2x chip conveyors Double electric cabinet Parat quick change toolholder Coolant system Incl. various accessories (see photos), as well as steady rest and 3-jaw chuck Ø 500 mm Rota-S plus

Stanje: novo, Cutting capacity at 90 degrees: round 305 mm Cutting capacity at 90 degrees: square 260 mm Knjdpfofd Abajx Abhsd Cutting capacity at 90 degrees: rectangle 350 x 200 mm Saw blade length: 3375 x 27 x 0.9 mm Blade speed: 37 + 74 m/min Table height: 940 mm Total power requirement: 1.5/1.8 kW Machine weight: approx. 0.61 t Required space: approx. 1.5 x 1.75 x 1.9 m Double miter metal band saw with AutoCut function - Miter cuts up to 60° left and 45° right - Ball-bearing rotary table - Vise laterally adjustable - Solid, large material support - Automatic cooling Illustration shows semi-automatic version.

Stanje: rabljeno, Thread diameter M3 - M12 mm Infinitely variable speed 400 rpm Torque 25 Nm Air pressure 6 - 8 bar Working area radius 1000 mm Machine weight approx. 12 kg Demonstration unit! Pneumatically driven tapping machine for M3 - M12 threads, featuring: - Stable and flexible articulating arm. - 6 quick-change chucks with slip clutch. Documentation in English!! Knedpofg U Smjfx Abhsd Optional: - Clamping table with T-slot mounting surface 900 x 600 mm

Stanje: novo, Leto izdelave: 2025, The EVP-RA 550 vibratory finishing machine from ERBA features an inclined process channel bottom with integrated separation. It is equipped with an easily exchangeable screening unit and delivers high operational efficiency thanks to its integrated drop step. Unloading and separation are performed via the built-in flap (manual/pneumatic). Upon request, a reinforced suspension and a high-powered motor can be installed for increased workloads. Motor speed can be continuously adjusted using a frequency inverter (optional). The EVP-RA 550 can be linked with other machines thanks to its lateral discharge system. The system can also be equipped with a fully automatic PLC control (optional). ERBA vibratory finishing systems are known for their reliability and longevity, which are based, among other things, on the hot-cast polyurethane lining of the process channel. Technical data: - Gross volume: 550 liters - Working channel width: 390 mm - Unbalance motor output: 4.0 kW - Speed: 1,400 rpm - Internal diameter of process channel: 1,400 mm All prices are net plus the currently applicable statutory VAT and freight costs. Please note: machines in pictures may include accessories that are optionally available and incur additional charges. If you are interested, we look forward to hearing from you. Our consultation is free of obligation and charge. Knedpjn Ut Uvofx Abhjd The European Commission offers an online platform for out-of-court dispute resolution (OS platform). This listing serves solely for online presentation of our goods. Contract negotiations are conducted via telecommunication (e-mail, phone, message portal). In the first step, we provide you with a non-binding offer, which also contains our general terms and conditions with imprint as well as information on your right of withdrawal, before any purchase or contract is concluded.