Univerzalni obdelovalni center

Stadler Keppler Maschinenbau GmbH HDC 3000, 5-achsig

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2010, • Travels: X=3100 mm, Y=1950 mm, Z=1390 mm • Heidenhain iTNC 530 with HR 410 handwheel • Machine table for multi-sided machining: 3000 mm x 1600 mm • 2-axis NC universal drilling and milling head, suitable for simultaneous and positioning mode • Spindle: 10,000 rpm, HSK 100, 130 Nm spindle torque • Tool changer system HSK 100 / 40 stations for tools up to 750 mm long • Swarf screw conveyors in X-axis, optimized chip removal • Chip conveyor (scraper-type) for transverse discharge, make: Knoll • Coolant supply 900 l, make: Knoll • External air • ICS (internal coolant supply) 60 bar for deep hole drilling • Enclosure with safety glass panels, open top for optimized crane loading • Split sliding doors at the front • Split sliding doors on the operator side • Wireless probing system RMP 60 • Including wash gun • Including platforms on the loading and operator side • Completely factory overhauled and newly painted Hsdpox U Sfnefx Abheh • Short delivery time upon agreement, subject to prior sale • Used machine • Y-axis ball screw replaced in September 2021, including bearings • X-axis linear guide and guide carriages replaced in July 2023 • Milling spindle overhauled May 2023 (new clamping set, new clamping cartridge, new rotary feed-through, general inspection performed) (23,105 spindle hours) • Under power for inspection in 72793 Pfullingen • Optional: clamps • Optional: commissioning/installation • Optional: transport • 23,122 total spindle hours • 53,991 total machine hours • Year of manufacture: 2010 Subject to prior sale

Stanje: rabljeno, Leto izdelave: 2009, Offered here is a used machining centre from the manufacturer Deckel Maho DMG. The machine is under power and can be inspected at our facility. Ex works, loaded on truck Manufacturer: DMG Deckel Maho Model: DMC 125 H duoBlock Year of manufacture: 2009 Control: Siemens 840 D Solutionline (PCU 50) Technical data: Travel X, Y, Z axes: 1250 x 1000 x 1000 mm Feed rate X, Y, Z axes: 20 - 60,000 mm/min Rapid traverse X, Y, Z axes: 60 m/min B-Axis travel: 360 x 0.001° B-Axis feed rate: 10,800°/min Hsdpfow Ew T Sjx Abhsh Max. table rotation speed: 30 rpm Spindle speed: 20 - 8,000 rpm Gear ranges: 2 Max. workpiece diameter: 1,250 mm Max. workpiece height: 1,580 mm Clamping area: 800 x 800 mm Max. workpiece weight: 1,500 kg Pallet weight: 570 kg Max. permissible weight difference for pallet loading: 1,000 kg Tool holder: SK 50 according to DIN 69871 Maximum tool length: 650 mm Tool magazine: 120 positions Transport dimensions: 6,500 x 3,000 x 3,200 mm Transport weight of the machine (without magazine or other accessories): approx. 20,000 kg Required space: approx. 7,000 x 6,000 mm Total weight of the machine: 24,000 kg Accessories: - Chip conveyor with coolant tank - Coolant system - 4x machine pallets - Tool magazine - Oil mist extraction - Various new spare parts: 1x Y-axis length measuring system (new) 1x lubrication unit 230V 0.12 30bar (new) 1x gear unit P-AGG*MKF1-KW2-20036 (new) 1x Cyclo gearbox F1C-A25 (new) 1x retrofit kit power module (new) 1x lifting devices for the machine

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 1.250 mm, pomik po osi Z: 1.500 mm, hitrost pomika os X: 30 m/min, hitrost podajanja osi Y: 30 m/min, hitrost podajanja os Z: 30 m/min, največja hitrost vretena: 6.000 obr/min, širina mize: 1.100 mm, dolžina mize: 3.500 mm, skupna višina: 4.164 mm, skupna širina: 5.875 mm, skupna dolžina: 9.120 mm, največja hitrost vrtenja: 6.000 obr/min, teža obdelovanca (maks.): 8.000 kg, skupna masa: 29.000 kg, vrtilni moment: 760 Nm, ACCESSORIES Cooling System: Yes Through-spindle Coolant: Yes Portable Handwheel: Yes Workpiece Probe (Heidenhain): Yes Preparation for Renishaw Touch Probe: Yes Full Splash Guard: Yes Chip Conveyor (2 Augers + 1 Side Hinge-belt): Yes Hedpfx Aboulwy Aohjh Automatic Tool Changer (ATC): Yes (24 tools)

Stanje: rabljeno, Article: Clamping heads Brand: Various manufacturers Hedpfsn H Nzujx Abhsh For multi-spindle automatic lathes, used or new Please contact us for further information and pictures via email (at) or *

Stanje: dober (rabljeno), Leto izdelave: 2019, CNC stružno-rezkalni center Tip stroja: Spinner TC 800 - 85 MCY Hodpfx Asxdc Sujbhoh Krmiljenje: Siemens 840 D Shopturn Leto izdelave: 2019 Na voljo od: takoj TEHNIČNI PODATKI: Maks. dolžina struženja: 900 mm Premer struženja: 500 mm Območje vrtenja: 2.600 - 4.000 1/min C-os Prehod palice: 85 mm Konjiček Pomiki: X-os: 360 mm Y-os: -55 / +65 +/- mm Z-os: 900 mm Število revolverjev: 1 Mesta za orodje: 12 Pogonska orodja: 12 Vpenjalo orodij: BMT 65 Oprema: Transporter ostružkov Elektronski ročni kolešček

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, obratovalne ure: 52.455 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2501-0154, stružna dolžina: 600 mm, premer struženja nad prečnim suportom: 140 mm, premer struženja: 300 mm, moč vretenovega motorja: 25.000 W, hitrost vretena (min.): 5.000 obr/min, največja hitrost vretena: 5.000 obr/min, pomik po osi Z: 900 mm, hitro pomikanje X-os: 3 m/min, hitri pomik os Y: 3 m/min, hitri pomik na osi Z: 3 m/min, največja hitrost vrtenja: 4.000 obr/min, vrtljajska hitrost (min.): 4.000 obr/min, vrtilni moment: 239 Nm, prehod palice: 80 mm, hitrost pomika os X: 165 m/min, hitrost podajanja osi Y: 165 m/min, hitrost podajanja os Z: 220 m/min, skupna masa: 10.500 kg, Oprema: dokumentacija / priročnik, The machine is still in operation and can be inspected under working conditions at VOVU Machining in Uden. In total, there are 6 identical machines available here. Equipped with a Fanuc 310is control unit. Hjdpfx Aour Hfzobhsh

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, delovna širina: 1.100 mm, najv. debelina pločevine: 50 mm, najv. debelina jeklene pločevine: 50 mm, skupna dolžina: 2.210 mm, skupna širina: 1.530 mm, skupna višina: 1.940 mm, skupna masa: 1.200 kg, vhodna napetost: 400 V, višina obdelovanca (maks.): 50 mm, moč: 6 kW (8,16 KM), vhodni tok: 18 A, Edge Rounding up to 1100 mm width. Ideal for edge rounding of light burrs up to 1100 mm working width. The DM1100 C performs edge rounding and removes sharp edges on both external and internal contours of parts made of stainless steel, steel, or aluminum, which have been cut using laser, shear, or punching machines. This machine processes parts of various dimensions, including products as small as 50x50 mm. The DM1100 C features a station with double cross belts for edge rounding, delivering clean, smooth, and burr-free edges on entire workpieces. DM1100 C Working capacity (mm): 1100x50 Number of cross-belt stations: 1 Cross-belt speed (m/s): 2–8 Feed speed (m/s): 0.6–3.2 Cross-belt motor (kW): (2x) 3 Feed motor (kW): 0.18 Total power (kW): 6 Power consumption (A): 18 Dust extraction connection per head (Ø mm): 150 Dimensions (mm): 2213x1530x1940 Weight (kg): 1200 Hodpfx Aetzfntebhoh

Stanje: dober (rabljeno), Leto izdelave: 2022, CNC Lathe Manufacturer: DMG MORI Machine Model: CLX 350 V1 Control: SLIMline 0i-F Plus Fanuc Touch Year of Manufacture: 2022 Controlled Axes: X / Z TECHNICAL DATA Turning length: 540 mm Spindle: Motor spindle 11/16 kW Tool mounting: VDI30, 12 positions Main spindle: AC motor - Speed: up to 5,000 rpm - Spindle nose: Main spindle A2-6" - Drive power (100/40% duty cycle): 11 / 16.5 kW Turret: 12-position - Driven: 12 stations - Toolholder: VDI 30 FEATURES + Technology cycle for applying alternating spindle speed for vibration-sensitive clamping + Direct measuring system X-axis + Programmable positioning and pressure force + Ergonomic DMG MORI SLIMline® operator panel + Hollow chuck cylinder, max. bar capacity D65 mm + Tailstock, hydraulically traversable via M-function + External electronic handwheel + Chip disposal package: - Chip conveyor with right-hand discharge instead of chip tank + 4-color signal lamp + Differential pressure chucking for main spindle + Foot pedal for tailstock + Automatic NC tailstock for maximum machining flexibility – full control of force within range 0.7 – 3.5 kN + High-pressure pump 12 bar + Coolant spray gun 5 bar + Manual tool measurement device in work area, make MARPOSS + Mechanical oil mist separator type AFS 600 Hedpfxew Hxi De Abhoh Technical data and specifications may be subject to changes and errors.

Leto izdelave: 1999, Stanje: rabljeno, Tractive force – max. 6.0 t Ram stroke – max. 1250 mm Hedpfjd Il A Nox Abhsh Space requirement approx. 1.20 x 1.20 x 3.25 m

Stanje: skoraj kot novo (rabljeno), Manesty D3B tablettenpers Hsdpfjiy Nnysx Abhoh Seriennummer: 24D117 Manesty 16-Stationen-Tablettenpresse, bis zu 500 Tabletten pro Minute, maximaler Tablettendurchmesser 25 mm, maximale Fülltiefe 20 mm, 3-Phasen-Anschluss.