Stäubli TX200

Stäubli TX200

Stanje: rabljeno, Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: F16/56XTA1/A/01, skupna masa: 1.120 kg, nosilnost: 100 kg, vhodna napetost: 400 V, vrsta vhodnega toka: trifazni, Stäubli TX200 industrijski robot, vključno s krmilnikom CS8CHP in ročnim upravljalnikom Stäubli – leto izdelave 2016 Ponujamo rabljen industrijski robot Stäubli TX200, skupaj z originalnim krmilnikom Stäubli CS8CHP, za prodajo. Tehnični podatki: Proizvajalec: Stäubli Model: TX200 Krmilnik: CS8CHP Leto izdelave: 2016 Nosilnost: 100 kg Stanje: Rabljeno Nedozli Huspfx Abiolg Obseg dobave: Robot Stäubli TX200 Originalni krmilnik Stäubli CS8CHP Ročni upravljalnik Stäubli Povezovalni kabel Navodila za uporabo Obseg dobave v skladu s fotografijami Robot izvira iz industrijskega raziskovalnega in razvojnega okolja in je bil skrbno vzdrževan. Naprava je bila v uporabi do razstavljanja. Ogled je možen po predhodnem dogovoru. Dodatne fotografije ali tehnične informacije vam z veseljem pošljemo na zahtevo.

Stanje: rabljeno, Leto izdelave: 2024, Rear section Primera DMC 4200 l / Single-row conveyor / single-shot distributor heads for 16 rows / Long loading platform for rear section / drawbar with folding support leg / lower link hitch Cat. 3 / braked axle with parking brake / dual-line air brake system Nodpfouhnwvex Abiolg

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, obratovalne ure: 200 h, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vrsta vhodnega toka: trifazni, skupna dolžina: 2.700 mm, Ponujam novo napravo za velikofromatne termoplastične rešitve za 3D-tisk. Krmiljenje: Stäubli / Cead – Profinet popolno krmiljenje. Robot: Stäubli TX200L – doseg 2700 mm, nosilnost 100 kg. Ekstruder: Cead E25 s pretokom 12 kg/h. Sušilnik VIZMATEC 100 l z avtomatskim dozirnikom za neprekinjeno proizvodnjo. Za generiranje robotske poti se uporablja G-CODE/NC-koda. Nlsdpfeurvzrjx Abisg

Stanje: kot nova (razstavni stroj), Leto izdelave: 2017, obratovalne ure: 800 h, Funkcionalnost: popolnoma funkcionalen, skupna masa: 1.000 kg, nosilnost: 130 kg, doseg roke: 2.590 mm, vrtilni razpon: 360 °, proizvajalec krmilnikov: Stäubli, vhodna napetost: 400 V, vrsta vhodnega toka: Klimatska naprava, natančnost ponavljanja: 0,05 mm, We are offering for sale a high-performance Stäubli TX200L CS8CHP industrial robot, which has undergone a thorough diagnostic test by the Stäubli service team. The test results confirmed that, with only 400 operating hours, the robot is currently in a condition comparable to new. For a more detailed review, the service report is available in PDF format. Technical specifications: • Rated payload: 100 kg • Reach between axis 1 and 6: 2594 mm Nsdpfxevcf N Dj Abijlg • Repeatability (ISO 9283): ± 0.06 mm • Maximum speed at payload center of gravity: 12 m/s • Cleanroom standard (ISO 14644-1): 5 • Protection class (wrist): IP65 (*67) Equipment and features: • Control unit: Stäubli CS8 series CS8C HP • Digital inputs/outputs: 16/16 • Connection cable: 10 m length • WMS mode selection and SP1 operating panel • Docking station Components and interfaces: • Pneumatic system: 2 solenoid valves in 5/2-way monostable configuration and 3 direct air lines between base and forearm • Electrical system: 1 socket with 19 contacts (7 twisted pairs, 2 of which are shielded, 3 power contacts) • Expansion option: Ethernet 19-pin cylindrical connector with 5 twisted pairs and 3 power contacts Thanks to its calibration and powerful features, this robot is ideal for precision applications, including machining. It comes fully equipped and is ready for deployment in industrial environments. For further information or to arrange a viewing, please do not hesitate to contact us. We look forward to collaborating with you.

Leto izdelave: 1988, stanje: rabljeno, številka stroja/vozila: 103.071.3156.78192, Saw blade diameter: 400 and 425 mm Cutting capacity at 90° round: 130 mm Cutting capacity at 90° square: 120 x 120 mm Mitre cutting capacity at 45° round: 130 mm Mitre cutting capacity at 45° square: 110 x 110 mm Cutting speeds: 11 and 22 m/min Feed rates: 670 mm/min Cut-off length: with automatic feed up to 1200 mm Electrical connection: 380 V, approx. 4 kVA Nlodjz N Amspfx Abisg Saw drive: 1.6/2.5 kW Space requirement: 1800 x 3800 x 2000 mm Weight: approx. 1800 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, obratovalne ure: 29.000 h, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, The INDEX C200 – year of manufacture 2009 – is a high-performance CNC production turning machine equipped with a FANUC 31i control, main spindle and counter spindle, and a 65 mm bar capacity. The machine features a premium three-turret configuration: Turrets 1 and 2 each offer X, Z, and Y axes, while Turret 3 is dedicated to operations on the counter spindle. All three disk turrets are fitted with 10 stations each and support driven tools up to 6,000 rpm, allowing for highly flexible complete machining operations. With a gantry loader, conveyor belt, C-axis on both main and counter spindles, and powerful spindle drives, this machine is especially suitable for productive series manufacturing of complex turned and milled parts. Control: FANUC 31i Configuration: Machine with 3 tool carriers / 3 disk turrets Bar capacity: 65 mm Machine bed: vertically arranged grey cast iron bed Main spindle: Spindle 4 Counter spindle: Spindle 5 with Z-axis Spindles Main spindle Bar capacity: 65 mm Front bearing spindle diameter: 110 mm Spindle nose: ISO 702/1, size 140 cylindrical Chuck diameter: 160 mm Power: 25 kW at 100% duty cycle / 33 kW at 40% duty cycle Torque: 112 Nm at 100% duty cycle / 150 Nm at 40% duty cycle Speed: 5,000 rpm C-axis: Resolution 0.001° Counter spindle Bar capacity: 65 mm Front bearing spindle diameter: 110 mm Spindle nose: ISO 702/1, size 140 cylindrical Chuck diameter: 160 mm Power: 25 kW at 100% duty cycle / 33 kW at 40% duty cycle Torque: 112 Nm at 100% duty cycle / 150 Nm at 40% duty cycle Speed: 5,000 rpm C-axis: Resolution 0.001° Z-axis (counter spindle): 700 mm travel Rapid traverse Z-axis: 50 m/min Tool carriers / Turrets Equipped with 3 disk turrets, each with 10 stations. Tool system for 10 stations: DIN 69880 cylindrical shank – Ø30 x 55 mm. Tool carrier 1 X, Z, Y axes 10 stations X-axis: 110 mm Z-axis: 320 / 550 mm (as per documentation) Y-axis: 100 mm, ±50 mm Driven tools: 6.5 kW / 16 Nm / 6,000 rpm Tool carrier 2 X, Z, Y axes 10 stations X-axis: 110 mm Z-axis: 550 mm Y-axis: 100 mm, ±50 mm Driven tools: 6.5 kW / 16 Nm / 6,000 rpm Tool carrier 3 X-axis 10 stations Dedicated exclusively for machining on the counter spindle X-axis: 180 mm Driven tools: 6.5 kW / 16 Nm / 6,000 rpm Nlodsy Tmhzspfx Abieg Further technical equipment as per documentation: - Gantry loader system with numerically controlled Z-axis - Workpiece unloading from main or counter spindle to conveyor belt - Remnant part removal from the main spindle into remnant container Gantry loader: Traverse speed: 100 m/min Traverse range: 70 mm Max. workpiece diameter: 90 mm Max. workpiece length: 250 mm Max. remnant length: 250 mm Max. workpiece weight: 3.5 kg Hydraulic system: Delivery rate: 19 l/min System pressure: 90 bar Hydraulic tank: 40 l Cooling circuit: Delivery rate: 19 l/min Cooling unit power: 13 kW Coolant system: Pump output: 80 l/min / 8 bar Tank capacity: 300 l Chip conveyor: Chip discharge height: 1,250 mm

Stanje: rabljeno, TEHNIČNI PODATKI - Plošča - Zunanji premer: 750 [mm] - Notranji premer: 150 - Glavna moč motorja: 4 [kW] Nledpfxjxb Em No Abisg - Napajalna napetost: 380 [V] - Skupna pogonska moč: 3,6 [kW] TEŽA IN DIMENZIJE - Potreben prostor: 1100 x 1700 [mm] - Višina stroja: 2000 [mm] - Teža stroja: 1100 [kg] - Število ur: 5160 [h]

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 10 - Number of spindles: 2 MAIN SPINDLE - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm - Minimum C-axis resolution: 0.001° COUNTER SPINDLE - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm - Minimum C-axis resolution: 0.001° - Travel: 390 / 600 mm TURNING-MILLING SPINDLE Nljdpfx Ajv Ig Avebieg - X-axis travel: 350 mm - Y-axis travel: ±80 mm - B-axis stroke: 270° - Minimum B-axis resolution: 0.001° - Tool type: HSK-T40 - Spindle speed: 18,000 rpm - Spindle drive power: 11 kW - Fixed tools on electrospindle for milling: 6 x VDI25 LOWER TURNING AND MILLING SPINDLE - Y-axis travel: ±80 mm - B-axis stroke: 270° - Minimum B-axis resolution: 0.001° - Tool type: HSK-T40 - Spindle speed: 18,000 rpm - Spindle drive power: 11 kW - Fixed tools on electrospindle for milling: 6 x VDI25 TOOL CHANGER - Tool changer type: Bar loader - Number of tools in magazine: 80 - Tool change time: 4.5 s ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power: 68 kW WEIGHT AND DIMENSIONS - Machine height: 2,500 mm - Machine weight: 11,000 kg MACHINE HOURS - Spindle hours: 19,781 h - Turning-milling spindle hours: 9,713 h ACCESSORIES - Control: Siemens Sinumerik 840D SL - Coolant tank * with high-pressure pump * with paper filter * internal coolant supply (ICS) - Chip conveyor - Spindle cooling - Parts removal

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2021, obratovalne ure: 435 h, skupna višina: 1.065 mm, skupna širina: 645 mm, skupna masa: 114 kg, potovalna razdalja osi X: 165 mm, največja dolžina izdelka: 685 mm, število osi: 3, Plastic 3D printer, manufactured in 2021. This FORMLABS Fuse 1 offers a build volume of 165 x 165 x 300 mm and a hopper capacity of 8.5 kg for PA12 nylon. It operates with a Ytterbium Fiber type laser and has a maximum part size of 15.9 x 15.9 x 29.5 cm. If you are looking for high-quality 3D printing capabilities, you should consider the FORMLABS Fuse 1 machine we have for sale. Contact us for more details. Formlabs Fuse 1 • Build volume: 165 x 165 x 300 mm (6.5 x 6.5 x 11.8 in) • Layer thickness: 110 microns (0.004 in) • Build speed: 10 mm per hour (0.39 in per hour) • Laser type: Ytterbium fiber • Laser spot size: 200 microns (0.0079 in) • Material refresh rate: 30 to 50 percent • Hopper capacity: 8.5 kg PA12 nylon (18.7 lb) • Dimensions: 685 x 645 x 1065 mm • Maximum part size: 15.9 x 15.9 x 29.5 cm (6.3 x 6.3 x 11.6 in) • Minimum access dimensions: 125.5 x 149.5 x 187.0 cm (49.4 x 59.0 x 73.6 in) • Printer dimensions: 64.5 x 68.5 x 107 cm, 165.5 cm with stand • Weight: 114 kg • Warm-up time: 60 minutes • Operating environment: 18 to 28 °C (68 to 82 °F), ≤ 30% relative humidity • Internal temperature: 200 °C (392 °F) • Temperature control: quartz tube heating elements, PTC cartridges • Air filtration: pressure-controlled two-stage filtration (HEPA and carbon) • Power requirements: EU 230 VAC 7.5 A, US 120 VAC 15 A • Galvanometer: Formlabs custom • Laser wavelength: 1065 nm • Laser power: max. 10 watts • Beam divergence: 4.01 mrad • Laser class: Class 1 • Connectivity: WiFi 2.4 GHz, Ethernet 1000Mbit, USB 2.0 • Touchscreen: 10.1 in (1280 x 800) • Controller brand: Formlabs • The display is damaged, but this does not affect functionality Fuse Sift (optional – price on request): • Fuse Sift dimensions: 99.1 x 61.0 x 188.8 cm (39.0 x 24.0 x 61.8 in) • Fuse Sift weight: 93 kg without build chamber or powder (205 lb) • Build chamber dimensions: 27.9 x 34.2 x 48.9 cm (11.0 x 13.5 x 19.3 in) • Build chamber weight: 11 kg (17.6 kg full with 20% packed powder; 24.3 lb, 38.8 lb) Nlsdpfx Aey Sy Nvobieg • Build volume: 16.5 x 16.5 x 30.0 cm (6.5 x 6.5 x 11.8 in) • Fresh powder container capacity: 8.5 kg Nylon 12 (18.7 lb) • Waste powder hopper capacity: 9.1 kg Nylon 12 (20 lb) • Air filtration technology: replaceable HEPA filter • Operating environment: 18 to 26 °C (68 to 80 °F), ≤ 30% relative humidity • Air management: negative overpressure hood with replaceable HEPA filter, independent ventilation system • Power requirements: EU 230 VAC 7.5 A, dedicated circuit; US 120 VAC 15 A, dedicated circuit • Power requirement for high-performance vacuum: EU 230 VAC 10 A; US 120 VAC 20 A • Vacuum requirements: auxiliary vacuum with static-dissipative, grounded components • Noise emission: max. 76.5 dB

Leto izdelave: 2006, stanje: dober (rabljeno), 5-axis vertical machining center, fully equipped with direct-drive technology. Machine fitted with a 30,000 rpm spindle, 60-position tool magazine, and Heidenhain TNC 530 CNC. Nljdopkyn Rspfx Abisg