Ekstrakcijski sistem s stiskalnico za briketiranje

Spänex C1 SMU 100 BA SHB 70 RS

Carried out according to FprEN 16770, tested according to the GS-HO-07 test principles of the BGHM. Filter cleaning offline with automatic fire suppression. The dust extractor is an extraction and filter unit designed for commercial use, intended for installation within the working area. The dust extractor is suitable for collecting, conveying, and filtering dry wood, paper, or plastic chips and dusts from one or several processing machines. Delivery is in fully assembled, operational condition.

Consisting of:
- Housing pressure-resistant and shock-resistant above 200 mbar
- Suction nozzle with backdraft damper
- Antistatic filter elements
- Jet-pulse cleaning system
- High-performance radial fan, arranged on the clean gas side, with three-phase IE3 energy efficiency class motor
- Exhaust silencer and air outlet grille
- Control system with CEE device plug (phase inverter)
- Automatic start-up control for up to 6 machines (activation via sensor coils or potential-free contacts possible)
- Automatic filter cleaning with runtime extension
- Integrated extinguishing system
- Painted RAL 9006

For cleaning, customer must provide prepared compressed air at the unit (connection via plug nipple NW7 / 6 bar). For the extinguishing system, a water line must be supplied at the device (connection via ½" fitting, min. 0.5 bar).

Technical data, dust extractor:
Suction nozzle ø: 355 mm
Residual dust content: < 0.1 mg/m³ (H3)
Filter surface: 26 m²
Cleaning: Jet-pulse automatic with runtime extension - offline
Air volume: 10,000 m³/h
Design for standard application
Nominal air volume: 7,130 m³/h at 20 m/s at the suction nozzle
Vacuum: 3,000 Pa at the suction nozzle at nominal air volume
Sound pressure level: 72 dB(A) at 1 m from unit
Motor output: 15.0 kW
Motor data: 400 V / 50 Hz / 3000 rpm / IP 54
Dimensions (L x W x H): 3,500 x 900 x 2,400 mm
Weight: 1,020 kg

SPÄNEX briquetting press Type SHB 70 RS 15,000.00
Transport pipe 110 x 3.2 mm for SHB 70 RS
Machine number briquetting press: 2570/2018

Interim hopper 1.2 m³ for mounting on the SMU 100 dust extractor, integrated star feeder discharge with gear motor, opening for connection to a briquetting press or rotary valve, galvanized version

For step-less adjustment of fan performance to actual demand by variable adjustment of the fan drive speed. The frequency inverter increases system efficiency, saves energy, and reduces material and machine wear.
- Motor output 15 kW
- Integrated PID controller
- Automatic energy optimization for maximum motor efficiency, even at partial load
- Integrated manual-automatic switch
- Start-up menu for quick parameterization
- Integrated radio interference filter according to EN 55011 - 1 B
- Synchronization with already running motor
- Device version IP 55

Pressure gauge 1 pc for controlling the frequency inverter and thus power consumption, depending on the opened machine slides, including connection hose to the pipeline.

Control expansion of the SMU BA dust extractor 1 pc consisting of:
- Slide control for max. 16 machines
- 14 sensor coils
- Multi-tone horn with flashing light
Rodpfx Aoyfp Srod Tsbt
- Rotary paddle bulk level indicator 1 pc in the intermediate hopper of the dust extractor Marking Atex II ½ Ex tD A20/21 to display the maximum fill level and control a conveying system (system-related).

Location: Supplier

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.