Naprava za varjenje zatičev

SOYER BMS 8 N

Leto izdelave: 2009, stanje: dober (rabljeno), številka stroja/vozila: 4495678, Offer 18336 Portable TIG-DC welding machine on transport trolley Technical Data: - TIG – DC + electrode welding - Welding current continuously adjustable for TIG welding from 5 A - 10.0 V up to 150 A - 22 V 35% duty cycle 100 A 100% duty cycle - Power supply 220 V / 50 Hz 15 A - Equipped with: - 2-stroke / 4-stroke function - HF (high-frequency) ignition - Adjustable welding current run-down - Pre-gas and post-gas flow control - 4.5 m torch package, lightweight version - Ground cable - Pressure regulator - Space requirement: approx. W 200 x H 300 x D 500 mm - Weight: approx. 10 kg - Transport trolley with gas bottle holder: W 550 x H 900 x D 560 mm - Weight transport trolley: approx. 10 kg Hodjhq T N Dopfx Ab Eefd

Stanje: novo, Table height: 650 - 1050 mm Dimensions (LxWxH): 1980 x 1480 x 650 to 1050 mm Table width: 1480 mm Table length: 1980 mm Approximate weight: 491 kg This allows the user to flexibly adjust the working surface height to the respective requirement in order to improve efficiency and ergonomics. Height adjustment is standardly accomplished via a manual hydraulic system within a range of 650 to 1050 mm (other ranges available upon request). Like the SST fix series, the worktop features a 100 x 100 mm Ø 28 mm hole grid. Used in combination with processing machines, inspection or finishing fixtures (deburring, marking, testing) can be adjusted to the height of the machine’s clamping table. The table systems can be easily relocated on site using pallet trucks. These mobile systems have proven ideal, with various clamping and securing options, for the maintenance of injection molding and die-casting tools. Tools can be safely maintained immediately after removal from the machine and then transferred to maintenance for repairs. Thanks to the fully bolted design of the clamping plate, the working surface can be replaced cost-effectively if wear occurs later on. Table 2 below provides an overview of the available standard models. Hjdpfx Ajfk E Dzjb Esfd Prices must be confirmed with the manufacturer prior to ordering!!

Stanje: rabljeno, Technical Details: Power consumption: 2.3 kVA Open-circuit voltage: 56 - 198 V Protection class: IP44 Approximate machine weight: approx. 35 kg Machine dimensions (HxWxD): approx. 0.4 x 0.3 x 0.27 m Hfjdpfxju Nwxzs Ab Esd Handheld Unit Power supply: 230V / 10A / 50Hz Stud welding unit with 3 stud-holder guns for Ø 2x 5 mm and Ø 1x 6 mm, including ground cable. Device has been tested and is fully functional.

Stanje: zelo dobro (rabljeno), Stud Welding Machine Manufacturer: TRW. Nelson Model: Alpha 850 Year of manufacture: 1995 Maximum welding capacity: studs up to 12 mm Welding current: steplessly adjustable from 100 to 850 A Hfedpfxjvcl T Ao Ab Eed Connection voltage: 400 V, 32 A Transport dimensions: Length: 550 mm Width: 320 mm Height: 380 mm

Stanje: novo, Table length: 1500 mm Table width: 1500 mm Table height: 850 mm Height adjustment: 50 mm Machine weight approx. 0.8 t Dimensions (L x W x H): 1.5 x 1.5 x 0.9 m Welding Table "SIEGMUND Professional Extreme 850 + Plasma Nitrided" is manufactured from through-hardened tool steel of special Siemund X8.7 alloy and is plasma nitrided. Hfsdpfxjmhm Axo Ab Eed Surface hardness: max. 850 Vickers. The table has a material thickness of approx. 24.5-27mm. The holes have a diameter of 28mm. Hole grid: 100 mm spacing on the tabletop, parallel hole arrangement with 50 mm spacing on the sides. Includes basic foot set. Accessories shown are optional. Price indicated is plus packaging and transport.

Leto izdelave: 2000, stanje: zelo dobro (rabljeno), I am selling a Costa A CT 1150 wide belt sander, year of manufacture 2000. Configuration: Hard rubber sanding roller – Electronic segmented pad. Working width: 1150 mm. Abrasive belt: 1180 x 2620 mm Pressure rollers for short workpieces. Compressed air cleaning for both units. Total weight: 2300 kg 2 motors: 15 + 11 kW Equipped with cleaning unit including extraction and bottom cleaning brush. Hjdpfjg Trubsx Ab Esfd Complete documentation included. Condition: LIKE NEW! The machine has had very little use. Available immediately.

Stanje: novo, Table height: 800 mm Dimensions (LxWxH): 1980 x 1480 x 800 mm Table width: 1480 mm Table length: 1980 mm Hfodpjfk Aipefx Ab Ejd Weight approx.: 630 kg This enables the user to adjust the working surface height flexibly to the respective requirements, improving efficiency and ergonomics. The height adjustment is standardly performed via a manual hydraulic system within a range of 800 mm (on request, other heights available). Like the SST fix series, the worktop is equipped with a 100 x 100 mm Ø 28 mm hole grid. When used in combination with machining equipment, inspection or post-processing fixtures (deburring, marking, checking) can be adjusted to the height of the machine’s clamping table. The table systems can be easily relocated using a pallet jack. These mobile systems, with various mounting and securing options, have proven ideal for the maintenance of injection moulding and die-casting tools. After removal from the machine, tools can be safely serviced on site and then transferred to maintenance for repairs. Due to the fully bolted construction of the clamping plate, the working surface can be replaced cost-effectively in the event of wear. The following Table 2 provides an overview of the available standard models. Price must be confirmed with the manufacturer before ordering! For accessories and further information, please follow this link:

Stanje: novo, Table height: 650 – 1050 mm Dimensions (LxWxH): 1450 x 950 x 650 to 1050 mm Table width: 950 mm Table length: 1450 mm Hedjfk Aixjpfx Ab Esfd Approx. weight: 425 kg This allows the user to flexibly adjust the working surface height to suit the specific requirements, improving both efficiency and ergonomics. Standard height adjustment is performed manually via a hydraulic system within the 650 – 1050 mm range (other heights available upon request). The worktop also features a Ø 28 mm hole grid with a 100 x 100 mm spacing, just like the SST fix series. Used in combination with processing machines, inspection or finishing fixtures (deburring, marking, checking) can be adjusted to match the clamping table height of the machine. The table systems can be easily relocated on site with a pallet truck. These mobile systems have proven ideal for the maintenance of injection moulding and die casting tools due to their various mounting and securing options. After removal from the machine, tools can be safely serviced on site and transferred to maintenance for repairs. Thanks to the fully bolted design of the clamping plate, the working surface can be replaced cost-effectively in case of future wear. The following Table 2 provides an overview of the available standard models. Price must be confirmed with the manufacturer before ordering!! For accessories and further information, please follow this link:

Stanje: novo, Table height: 650 - 1050 mm Dimensions (LxWxH): 1450 x 950 x 650 to 1050 mm Table width: 950 mm Table length: 1450 mm Weight approx.: 428 kg Hfedpfxegrvwis Ab Eed This allows the user to flexibly adjust the working surface height to meet the specific requirements, thereby improving productivity and ergonomics. Height adjustment is standardly performed by a manual hydraulic system in the range of 650 – 1050 mm (higher or lower adjustment available upon request). The table systems can be easily moved on site with a pallet truck. These mobile systems have proven ideal, particularly with various fastening and securing options, for maintenance of injection molding and die casting tools. After removal from the machine, tools can be safely serviced on site or transferred to the maintenance department for repairs. Thanks to the fully bolted construction of the clamping plate, the working surface can be replaced cost-effectively in the event of wear. The price must be requested from the manufacturer before ordering! For accessories and further information, please follow this link:

Stanje: dober (rabljeno), Varilni vijaki, keramični obroči, vijaki s konično vžigalno točko, glavni vijaki - Varilni vijaki: s keramičnimi obroči, 40 različnih tipov - Količina/izvedba: glej fotografijo s seznamom delov - Oddaja/cena: samo kot celota - Dimenzije: 1200/800/V120 mm - Skupna teža: 64 kg Hfsdpfxomxpt Is Ab Eod