Linija strojev za izdelavo FFP2 in FFP3 zaščitnih mask

Sonimak FFP2& FFP3 Face Mask Machine Line

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, pritisk: 16 letvica, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, temperatura: 400 °C, vhodna napetost: 6.000 V, vrtljajska hitrost (min.): 1.500 obr/min, največja hitrost vrtenja: 1.500 obr/min, vrsta hlajenja: zrak, Industrial Steam Turbogenerator Howden – Model KK&K TWIN CA46, NEW, never installed or commissioned, still under manufacturer’s warranty. Due to a revision of long-term industrial strategy, an industrial Howden KK&K TWIN CA46 steam turbogenerator, complete according to original OEM supply, is available for sale. The unit is BRAND NEW, entirely manufactured and tested at OEM level, but has never been installed or put into service. It remains covered by the manufacturer’s warranty and is stored in a closed, controlled environment. Immediate availability eliminates the standard lead time, which for this class of equipment is typically 24–36 months. Main scope of supply: - Steam turbine on skid with integrated gearbox - Synchronous generator supplied separately Turbine technical configuration: - Model: KK&K TWIN CA46 - Double-casing turbine (Steam Part A + Steam Part B) - Integrated 3-shaft gearbox (2 pinions + central wheel) - Controlled steam extraction between HP and LP sections (included) Key design conditions: - Inlet steam pressure (HP): 16 bar(a) - Inlet steam temperature: 400 °C - Electrical output at terminals: up to 1,595 kW - Rated speed: 1,500 rpm Electrical generator: - Three-phase synchronous generator - Rated power: 1,994 kVA - Voltage: 6 kV – Frequency: 50 Hz - Cooling: IC31, air - Brushless design, ready for grid-parallel operation Included systems: - Integrated base-mounted oil system - Main mechanical oil pump and auxiliary electric pump - Local control panel on skid - Control and protection panel with Siemens SIPROTEC 5 - Electronic speed and pressure governor - Independent overspeed protection device - ENC-RfG turbogenerator simulation model Typical applications: - Industrial cogeneration plants - Process steam energy recovery - Biomass and waste-to-energy facilities - Combined generation of electric power and process steam Condition and status: - Condition: NEW - Manufacturing year: late 2024 - Never installed – never commissioned - Still under manufacturer’s warranty - Complete OEM technical documentation available Kdsdpfxoyidvdo Agfet - Installation and commissioning possible with OEM support Possible application fields: - Biomass and waste-to-energy plants for the production of electric power and process steam, with immediate unit availability and no multi-year production lead times - Industrial cogeneration (CHP) in facilities with continuous process steam consumption (paper, food, chemical, manufacturing industries) - Revamping/repowering of existing plants as a rapid alternative to new OEM units with 24–36 month lead times Price: on request. Further technical details and documentation available upon request.

Leto izdelave: 2021, stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Industrijska fotovoltaična elektrarna z močjo 676,13 kWp (2021) Namestitev je bila izvedena leta 2021, pri čemer je bila prvotna maksimalna moč 676,13 kWp. Sestavljena je iz monokristalinih fotovoltaičnih modulov PERC, nameščenih na obteženih aluminijastih konstrukcijah, brez vrtanja v streho in z naklonom približno 10°. Pretvorba energije poteka s pomočjo 5 trifaznih inverterjev Huawei SUN2000-100KTL-M1, skupne nominalne moči približno 500 kW AC in izhodne napetosti 400 V trifazno. Inverterji vključujejo sledilnike MPPT, spremljanje nizov, komunikacije PLC/Modbus in vgrajene zaščite za enosmerni in izmenični tok. Elektrarna ima na voljo števec ITRON, ki je odgovoren za nadzor pretoka ničelne moči, konfiguriran zaradi administrativnih razlogov, da se prepreči vnos odvečne energije v omrežje. Prav tako vključuje električne omare, zaščite, kanale, sončne kable ter sisteme za merjenje in nadzor. Glavne značilnosti: • Leto namestitve: 2021 • Prvotna maksimalna moč: 676,13 kWp • Moč odklopljenih nizov: 110,14 kWp • Trenutna maksimalna moč: 565,99 kWp • Inverterji: 5 Huawei SUN2000-100KTL-M1 • Skupna nominalna moč inverterjev: pribl. 500 kW AC • Izhodna napetost: 400 V trifazno • Tehnologija modulov: monokristalna PERC • Obtežena aluminijasta konstrukcija na strehi Kdsdpfjznbq Dsx Agfst • Števec pretoka ničelne moči: ITRON • Sistem za spremljanje, merjenje in zaščito • Lokacija: El Prat de Llobregat, Barcelona, Španija • Na voljo za pregled in študijo demontaže

Stanje: dober (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: KT 615-7, pritisk: 15 letvica, moč: 1.700 kW (2.311,35 KM), temperatura: 325 °C, vrtljajska hitrost (min.): 7.673 obr/min, Steam Turbine M+M Turbinen-Technik – 1.7 MW Industrial Top Quality Offered for sale: Complete high-quality industrial steam turbine installation from the renowned German manufacturer M+M Turbinen-Technik GmbH. The steam turbine has already been dismantled by a specialized company. All necessary documentation, manuals, diagrams, etc. are complete and available. Key specifications: Type: KT 615-7 Power output: 1700 kW (1.7 MW) Year of manufacture: 2009 Speed: 7,673 rpm Inlet pressure: 15 bar (abs) Exhaust pressure: 0.1 bar (abs) Inlet temperature: 325 °C Description: This robust steam turbine is built to German quality standards and guarantees high efficiency and long service life. The unit is complete with control and measurement systems, valves, and piping, and was previously used in an industrial environment. The turbine is currently dismantled/in preparation for dismantling (as seen in the photos), which simplifies transport and reinstallation. It is ideal for reuse in a new installation or as an expansion of existing capacity. Advantages: Reliable and proven technology Compact and powerful output (1.7 MW) Complete system (including control equipment) German top quality Suitable for various industrial applications Applications: Combined Heat and Power (CHP) Industrial power supply Waste heat utilization Kdodjzbkgispfx Agfjt Process industry 📩 Interested or need more information? Feel free to contact us for technical details, inspection, or a customized quotation.

Stanje: novo, Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 81159538275956, moč: 275 kW (373,90 KM), število valjev: 12, vrtljajska hitrost (min.): 1.500 obr/min, skupna masa: 1.763 kg, Dostępne moduły gazogeneratorowe na bazie MAN. Ilość dostępna – 23 sztuki. Stan: nieużywane (fabrycznie nowe) Na podstawie osobnych ustaleń dla potencjalnych nabywców oferujemy usługę przebudowy tych silników na wersje zasilane gazem ziemnym lub olejem napędowym. Modele silników: MAN V12X-2200 • 12 cylindrów, pojemność 29,6 l • Średnica cylindra 138 mm, skok tłoka 165 mm • Moc 1618 kW MAN V12X-2000 • 12 cylindrów, pojemność 24,2 l • Średnica cylindra 128 mm, skok tłoka 165 mm • Moc 1471 kW MAN V12-1900 • 12 cylindrów, pojemność 24,2 l Kdedpexcudasfx Agfot • Średnica cylindra 128 mm, skok tłoka 165 mm • Moc 1397 kW MAN V12-1650-1800 • 12 cylindrów, pojemność 24,2 l • Średnica cylindra 128 mm, skok tłoka 165 mm • Moc: V12-1650 – 1213 kW, V12-1800 – 1324 kW MAN V12-1550-1400 • 12 cylindrów, pojemność 24,2 l • Średnica cylindra 128 mm, skok tłoka 165 mm • Moc: V12/1550 – 140 kW – 1213 kW, V12/1400 – 1029 kW Silniki MAN wysokoprężne do żeglugi komercyjnej MAN D3872 (EKSPLOATACJA LEKKA I ŚREDNIOCIĘŻKA) • 12 cylindrów, pojemność 29,6 l • Średnica cylindra 138 mm, skok tłoka 165 mm • Moc 1471–1618 kW / 1213 kW MAN D2862 DUAL FUEL (EKSPLOATACJA ŚREDNIOCIĘŻKA) • 12 cylindrów, pojemność 24,2 l • Średnica cylindra 128 mm, skok tłoka 157 mm • Moc 794 kW MAN D2862 (EKSPLOATACJA LEKKA, ŚREDNIOCIĘŻKA I CIĘŻKA) • 12 cylindrów, pojemność 24,2 l • Średnica cylindra 128 mm, skok tłoka 157 mm • Moc: 1029–1471 kW / 749–1066 kW / 551–735 kW Silniki pomocnicze MAN MAN D2862 • 12 cylindrów, pojemność 24,24 l • Średnica cylindra 128 mm, skok tłoka 157 mm • Moc: 600–800 kW

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, obratovalne ure: 100 h, Linija za predelavo hlodovine vključuje naslednje enote: • Trakasta žaga za cepljenje hlodov – ELCA SNV14 • Voziček za premikanje hlodovine – ELCA CMOL33 • Ravnalni stroj – ELCA PTL1000 • Krožna žaga za razrez – ELCA TRCBT3 Kodpfx Aozg Dl Iogfjdt • Serijski razrezovalnik – COSTA LEONE 2160 • Profilometer za merjenje hlodovine – VISION_1200 • Sistemi za transport materiala, potrebni za delovanje predelovalne linije: ◦ Prečni verižni transporter ◦ Valjčni transporter • Brusilni stroj za trakaste žage – ALIX AF 518 • Sistem za odsesavanje prahu in oblancev – VENTIL VENETA, model PF/JET, namensko zasnovan za linijo

Leto izdelave: 2021, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, REF: MM6471 1 x popoln sistem za proizvodnjo pare CERTUSS, leto izdelave 2021 (tip – CERTUSS Universal 600 TC) z dozirnim sistemom za kemikalije in rezervoarjem za izpust kondenzata, ki ga nadzira avtomatski PLC. Popoln sistem za proizvodnjo pare CERTUSS Universal 600 TC, leto izdelave 2021, je visokozmogljiv industrijski parni generator, zasnovan za zagotavljanje zanesljive in energetsko učinkovite pare za neprekinjene proizvodne procese. Z zmogljivostjo proizvodnje pare 600 kg/uro je sistem idealen za predelavo hrane in pijač, pekarno, predelavo mesa in rib, proizvodnjo pripravljenih jedi, farmacevtsko proizvodnjo, komercialne pralnice, kemično obdelavo in druge industrijske aplikacije. KLJUČNE TEHNIČNE LASTNOSTI: Proizvajalec: CERTUSS. Model: Universal 600 TC. Leto izdelave: 2021. Izkoristek pare: 600 kg/uro. Gorivo: Propan (lahko se preuredi). Visoko učinkovit industrijski parni generator. Kompaktna vertikalna zasnova. Hiter zagon iz hladnega stanja. Kdedpfjzn Rciox Agfst Avtomatski nadzorni sistem PLC. Popoln paket parnega generatorja z dodatno opremo. Primerno za neprekinjeno industrijsko proizvodnjo pare. Stanje: Odlično – zelo malo delovnih ur.

Stanje: rabljeno, Leto izdelave: 2000, Oprema za taljenje stekla za izdelavo steklene izolacije za glave svetilk. Kdjdpfx Agsxbyz Ujfot

Stanje: zelo dobro (rabljeno), CATALOG NUMBER 7817 TECHNICAL SPECIFICATIONS DDCA – Double-End Tenoner - Slat length: 180 – 850 mm - Slat width: 30 – 75 mm - Slat thickness: 10 – 45 mm - Spindle diameter: 30 mm - Max. blade diameter: 250 mm - 4 blades included 5 spindles: Left side: - 1) Vertical upper 2.2 kW - 2) Horizontal lower 2.2 kW Right side: - 1) Vertical lower 2.2 kW - 2) Vertical upper 2.2 kW - 3) Horizontal lower 2.2 kW - Spindles adjustable up/down, left/right - Material hold-down: 2 pcs - Stepless feed speed adjustment 0-10 m/min - Central lubrication via oil pump - Pump motor 2.2 kW - Extraction port diameter: 5x100 mm - Dimensions (LxWxH): 1900x2230x1530 mm DDGA – Four-Sided Planer - Working width: 35 – 130 mm - Working thickness: 10 – 60 mm - Min. workpiece length: 200 mm Spindle arrangement: - 1) Bottom: 5.5 kW - 2) Right: 5.5 kW - 3) Left: 5.5 kW Kdsdezkt Rzspfx Agfot - 4) Top: 5.5 kW - Spindles adjustable up/down - Top & bottom spindle diameter: 40 mm - Right & left spindle diameter: 30 mm - 4 feed speeds: 13/20/26/40 - Central chain lubrication via oil pump - Extraction port diameter: 4x120 mm - Dimensions (LxWxH): 3200x1370x1830 mm DBCA – Tenoner Infeed Conveyor - Max. feed speed: 40 m/min - Max. slat width: 150 mm - Motor: 0.55 kW - Overall dimensions (LxWxH): 2320x600x1150 mm DBGA – Batten Feeder - Batten length: 200–600 mm - Batten width: 30–120 mm (assuming '20' is a typo) - Batten thickness: 10–40 mm - Stepless feed speed adjustment: 10–40 m/min - Motor: 0.75 kW - Overall dimensions (LxWxH): 1500x500x980 mm - Total weight approx. 4900 kg Net price: 63,900 PLN Net price: 15,200 EUR (based on 4.2 EUR rate) (Prices may vary with exchange rate fluctuations) * MAR-MASZ guarantees the quality of your purchase, but is not an authorized representative of the manufacturer. All trademarks and names are used solely for informational purposes to facilitate product identification. We only resell goods that have been previously released to the market by the manufacturer. We have no business relationship with the manufacturer.

Stanje: pripravljen za uporabo (rabljen), Pozdravljeni, Ponujam rabljeno, pocinkano rotacijsko in nagibno konstrukcijo za fotovoltaične panele, velikosti 10,5 m x 5 m. Kjdjzx Uwlepfx Agfedt Celotna konstrukcija je zložljiva. Trenutno je nameščenih 12 panelov z močjo od 7,5 kW do 9,5 kW, ki jih kupec prejme brezplačno ob nakupu sledilnika (tracker). V ponudbi imamo 1000 kompletov, izmed katerih lahko kupec izbira. Zainteresirane vabim, da me kontaktirajo.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, obratovalne ure: 8.000 h, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: trifazni, moč: 600 kW (815,77 KM), vhodna napetost: 400 V, vrtljajska hitrost (min.): 600 obr/min, največja hitrost vrtenja: 600 obr/min, gorivo: gospodinjski plin H, skupna masa: 25.000 kg, vrsta hlajenja: voda, trajanje garancije: 1 meseci, nazivna moč: 630 kW (856,56 KM), vhodna frekvenca: 50 Hz, Oprema: dokumentacija / priročnik, Ponujamo to blokovno plinsko kogeneracijsko elektrarno ALC »DIESELMASH - CGU« DvGA-630 8CHN25/34, ki je v odličnem stanju in je bila izdelana leta 2003. Proizvajalec: ALC »DIESELMASH - CGU« Model: DvGA-630 8CHN25/34 Leto izdelave: 2003 Kjdpfx Aezlwi Djgfsdt Če imate kakršna koli vprašanja ali potrebujete več informacij, nam pišite ali nas pokličite.