Orodje presetter

SOMET SDJ 300Werkzeugvoreinstellgeraet

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, transportni trak za ostružke, Control: FANUC 18i-MB Travel X / Y / Z: 1,020 / 510 / 510 mm Feed rate X / Y / Z: 1 - 10,000 mm/min Knsdpfxetz T Smo Abhod Rapid traverse X / Y / Z: 48,000 mm/min Table size (W x D): 1,200 x 510 mm Spindle speed: 15,000 rpm Internal coolant: 20 bar Tool holder: BT 40 Tool changer: 48 positions Weight: approx. 7,500 kg Dimensions (W x D x H): approx. 3,100 x 2,200 x 2,900 mm Hours: Spindle hours: 9,310 Accessories: RENISHAW tool measurement system Type: OMP 40, coolant tank, machine manual, machine lamp, chip conveyor

Stanje: dober (rabljeno), potovalna razdalja osi X: 2.300 mm, pomik osi Y: 630 mm, pomik po osi Z: 810 mm, Manufacturer: Hedelius Type: Tiltenta T6-2300 Control: Heidenhain iTNC530 Year of manufacture: 2005 Optional NC Rotary Table Working area: 750 x 550 mm Table load: 800 kg Table torque: 1600 Nm Table rotation speed: 22 rpm 2 x 850 mm pendulum operation Heidenhain HR 410 handwheel Heidenhain iTNC530 Knodpfx Abewrq Upehjd Specifications Metric X-axis: 2300 mm Y-axis: 630 mm Z-axis: 810 mm A-axis: -92° to +92° B-axis: 360.000° Table length: 2900 mm Table width: 630 mm Table load: 2000 kg X-axis feed rate: 60,000 mm/min Y-axis feed rate: 60,000 mm/min Z-axis feed rate: 60,000 mm/min Tool holder: 40 ISO/BT/MK Spindle power: 26.5 kW Spindle speed: 12,000 rpm Tool changer: 40 positions Through-spindle coolant: 20 bar Number of controlled axes: 5 Chip conveyor: Yes Coolant system: Yes Dimensions (approx.): Length: 7500 mm Width: 3250 mm Height: 3250 mm Weight: 16,800 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but its accuracy cannot be guaranteed. Accordingly, no representation or contractual obligations are created. We recommend verifying all critical details.

Stanje: rabljeno, Rotary Vane Vacuum Pump Manufacturer: Leybold Model: Trivac D25 BCS Ksdpfjbqnhgsx Abhend Cat. No.: 11879 Pumping speed: 25 m³/h Ultimate pressure: approx. 0.005 mbar Motor: 400V, three-phase Please send us your pump inquiry specifying your requirements.

Stanje: rabljeno, Leto izdelave: 2005, X-axis travel: 1,000 mm Y-axis travel: 1,000 mm Z-axis travel: 1,000 mm Control: Siemens 840 D Spindle speed range – main spindle: 20 – 18,000 rpm Drive power – main spindle: 28 / 19 kW Max. torque: 121 Nm Tool holder: HSK-A63 Swiveling B-axis: -30 / +180° Swivel time: 1.2 s Number of pallets: 2 Pallet size: 1,000 x 800 mm Max. workpiece weight: 1,500 kg Rotary C-axis: 360° Number of tool stations: 180 positions Tool holder: HSK-A63 Total power requirement: 78 kVA Machine weight approx.: 27.0 t Space requirements approx.: 8.0 x 7.0 x 3.4 m 5-axis CNC universal machining center DECKEL MAHO – DMC 100 U duoBLOCK - Swiveling milling head (B axis) - NC rotary table (C axis) - Pallet changer - 180-position tool magazine Ksdpfowf Rgfjx Abhend - WITHOUT zero-point clamping system - WITHOUT RINGLER extraction system - WITHOUT tools

Stanje: dober (rabljeno), Leto izdelave: 2006, potovalna razdalja osi X: 1.626 mm, pomik osi Y: 1.016 mm, pomik po osi Z: 813 mm, nazivna (navidezna) moč: 22 kVA, model krmilnika: HAAS, širina mize: 914 mm, dolžina mize: 1.626 mm, obremenitev mize: 4.536 kg, premer vrtljive mize: 760 mm, skupna masa: 13.611 kg, največja hitrost vretena: 6.000 obr/min, Oprema: transportni trak za ostružke, Commissioned 03/2006 IKZ 70 bar (TSC 1000) 30-pocket tool magazine (BT50) Full 4th axis Knjdpjvgmr Iofx Abhed Spindle & gearbox replaced new in 2017 Operated in single-shift operation Machine can be inspected under power !!!! Free loading until CW04/2025 !!!! (if our new machine is delivered on the same day)

Stanje: rabljeno, Leto izdelave: 2008, X-axis travel: 800 mm Y-axis travel: 700 mm Z-axis travel: 600 mm Control: SIN 840D Powerline Spindle speeds - stepless: 1 - 8,000 rpm Drive power at 40% duty cycle: 28.00 kW Spindle diameter at front bearing: 80.00 mm Spindle taper: HSK-A100 B-axis: 187° Feed rate X/Y/Z-axis: 15,000 mm/min Rapid traverse X/Y/Z: 50.00 m/min Feed force X/Y/Z-axis: 10,000 N Rapid traverse B-axis: 11.20 rpm Pallet size: 800 x 630 mm Table load: 0.80 t C-axis: 360.000 x 0.001° Table speed range: 1 - 500 rpm Tool magazine: Chain magazine, 120 positions Tool diameter: 100 mm Tool diameter with 2 empty pockets: 160 mm Maximum tool length: 350 mm Maximum tool weight: 10.00 kg Total power requirement: 60.00 kW Machine weight approx.: 13.00 t Space requirement approx.: 7.40 x 5.30 x H3.50 m Knjdpfxjw Df A So Abhed Equipped with Siemens SIN840D control, tool taper cleaning, tool breakage monitoring, coolant system with 2 pressure stages (40 bar / 80 bar), chip conveyor, mode 4 operation, extraction system.

Stanje: rabljeno, Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 600 mm, pomik osi Y: 500 mm, pomik po osi Z: 540 mm, hitro pomikanje X-os: 24 m/min, hitri pomik os Y: 24 m/min, hitri pomik na osi Z: 20 m/min, hitrost pomika os X: 16 m/min, hitrost podajanja osi Y: 16 m/min, hitrost podajanja os Z: 16 m/min, nazivna (navidezna) moč: 16 kVA, proizvajalec krmilnikov: Heidenhain, model krmilnika: ITNC 530, obremenitev mize: 800 kg, skupna masa: 5.300 kg, hitrost vretena (min.): 10.000 obr/min, delovne ure vretena: 8.500 h, moč vretenovega motorja: 12 W, nos vretena: ISO B40, število vreten: 1, število mest v zalogovniku orodij: 24, vhodna napetost: 400 V, vrsta vhodnega toka: trifazni, Oprema: dokumentacija / priročnik, transportni trak za ostružke, Machine in very good condition, maintained by the manufacturer. Available for quick delivery. Renishaw probe. Kjdpfxswxrgtj Abhend Video available upon request. Delivery and installation by our team can be arranged.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, obratovalne ure: 32.000 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 800 mm, pomik osi Y: 800 mm, pomik po osi Z: 800 mm, hitro pomikanje X-os: 60 m/min, hitri pomik os Y: 60 m/min, hitri pomik na osi Z: 60 m/min, hitrost pomika os X: 15 m/min, hitrost podajanja osi Y: 15 m/min, hitrost podajanja os Z: 15 m/min, vrtilni moment: 121 Nm, proizvajalec krmilnikov: Siemens, širina mize: 700 mm, dolžina mize: 900 mm, obremenitev mize: 1.400 kg, vrtljajska hitrost (min.): 20 obr/min, največja hitrost vrtenja: 18.000 obr/min, največja hitrost vretena: 18.000 obr/min, delovne ure vretena: 32.000 h, dovod hladilne tekočine: 40 letvica, nos vretena: HSK63A, število mest v zalogovniku orodij: 30, dolžina orodja: 350 mm, premer orodja: 100 mm, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, DMG MORI DMU 80P duoBlock Year of manufacture: 2006 Operating hours: 62,000 h Spindle hours: 31,000 h Function tested and cleaned Maintenance performed as per manufacturer's specifications Machine geometry within new-machine tolerance Equipment: 5 axes Knedpfsw Ht Ibjx Abhed Swivel head (controlled B-axis) Direct path measurement in X/Y/Z (glass scales) Chip conveyor Extraction unit NC rotary table Tool magazine with 30 positions Heidenhain touch probe BLUM laser Handwheel Rotating sight window High-pressure coolant system 40 bar Chip flushing system Operating mode 4

Stanje: zelo dobro (rabljeno), With B and C axis Travel paths: 1000 x 1000 x 100 mm Table: 1000 x 800 mm Spindle interface: HSK100 Kodpfx Absvvka Ujhjnd Spindle speeds: up to 8,000 rpm Tool changer: 60 positions Control: SIEMENS 840D Shopmill Through-spindle coolant system 3D measuring probe Tool measurement Tool breakage monitoring Various accessories MARCELS MASCHINEN CH

Stanje: dober (rabljeno), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 2.200 mm, pomik po osi Z: 600 mm, dolžina podajanja os X: 2.200 mm, dolžina pomika po osi Y: 600 mm, dolžina podajanja os Z: 660 mm, nazivna (navidezna) moč: 35 kVA, največja hitrost vretena: 12.000 obr/min, The machine is in good technical condition, equipped with a Siemens Sinumerik 840D CNC system, internal cooling, a 30-position tool magazine, plus tool holders. Kedpov Al Ndjfx Abhond