Ekstruzijska linija za raztegljivo folijo

SML TYPE: CC/135,60,60/2700/600

Stanje: rabljeno, Leto izdelave: 2008, X-axis travel: 800 mm Y-axis travel: 700 mm Z-axis travel: 600 mm Control: SIN 840D Powerline Spindle speeds - stepless: 1 - 8,000 rpm Drive power at 40% duty cycle: 28.00 kW Spindle diameter at front bearing: 80.00 mm Spindle taper: HSK-A100 B-axis: 187° Feed rate X/Y/Z-axis: 15,000 mm/min Rapid traverse X/Y/Z: 50.00 m/min Lodpfxjw Df A So Aacohc Feed force X/Y/Z-axis: 10,000 N Rapid traverse B-axis: 11.20 rpm Pallet size: 800 x 630 mm Table load: 0.80 t C-axis: 360.000 x 0.001° Table speed range: 1 - 500 rpm Tool magazine: Chain magazine, 120 positions Tool diameter: 100 mm Tool diameter with 2 empty pockets: 160 mm Maximum tool length: 350 mm Maximum tool weight: 10.00 kg Total power requirement: 60.00 kW Machine weight approx.: 13.00 t Space requirement approx.: 7.40 x 5.30 x H3.50 m Equipped with Siemens SIN840D control, tool taper cleaning, tool breakage monitoring, coolant system with 2 pressure stages (40 bar / 80 bar), chip conveyor, mode 4 operation, extraction system.

Stanje: dober (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, Grinding wheel 508x254 (305) mm, regulating wheel 330x254 (305) mm, regulating wheel speed 0-115 rpm, grinding wheel peripheral speed 45 m/sec, grinding diameter 2-150 mm, grinding wheel drive 45 kW, machine weight 6.5 t, required space approx. 3.0x1.5 m. Lodpfx Aasuy Ifgocehc Before sale, the machine will be fitted with a new Siemens S7 control system including a new operator panel, and the dressing quill for the grinding wheel is electrically actuated via servo motor. The machine will be thoroughly checked, with defective parts repaired or replaced. Various options possible (coolant system, loading/unloading devices, workpiece rulers, etc.).

Stanje: dober (rabljeno), Approx. 30 linear meters of shelving system Schaefer R3000 Manufacturer: Schaefer R3000 Condition: As new, see photos. More than 300 meters available in stock. Uprights, galvanized, height 2.5 m, depth 40 cm Shelves, galvanized, 100 kg load capacity per shelf, bay width approx. 100 cm Asking price: €2,890.00 net ex-works Scope of supply: 31 upright frames, 2.5 m, galvanized 90 shelves, 100 kg load capacity per shelf, galvanized 10 cross braces for stabilization 3 shelf levels per bay (additional levels available at extra cost) Other configurations possible. Heights available: 2.3 m, 2.5 m, or 3 m. Goods are in stock. We always have over 3,000 linear meters of pallet racking from various manufacturers in stock. Transport and assembly available upon request. Further information available on request. (Subject to change and errors in technical data, specifications, and prices. Sale subject to prior sale. Please refer to our terms and conditions. All prices exclude VAT, ex-works.) Purchase / Sale: We are continuously buying and selling a wide range of items from various sectors. To visit our website, please click on our logo! Lhsdscfhx Tspfx Aacoc - Swept clean business clearances - Company liquidations - Fast – flexible – efficient! We also clear out and/or dispose of inventory for insolvency administrators. Please send us a brief inquiry, and we will get back to you promptly.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, obratovalne ure: 55.806 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 1.500 kN, premer vijaka: 45 mm, skupna dolžina: 4.700 mm, skupna širina: 1.700 mm, skupna višina: 2.000 mm, skupna masa: 4.850 kg, For sale is an injection molding machine from Arburg, model 470 C 1500-400. The offer includes an Arburg handling unit, type Multi Select with X/Y/Z axes 600/600/1400 mm. The machine is in excellent condition and ready for immediate use. Technical data: - Year of manufacture: 2011 - Clamping force: 1500 kN - Tie bar distance: 470 x 470 mm - Mounting platen: 650 x 650 mm - Operating hours (pump): 55,806 h Lhodpfx Aow E Itioacec - Injection unit: Ø 45 / SP 400 - Shot volume: approx. 254 cm³ - Shot weight: approx. 232 g - Injection pressure: up to 1580 bar - Dimensions: approx. 4700 x 1700 x 2000 mm - Weight: 4850 kg Transport and loading can be organized Europe-wide upon request, at an additional cost. All prices plus VAT. Inspection is possible by appointment. Please contact us – our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase/sale BUYING & SELLING OF PRODUCTION & METALWORKING MACHINES AND MORE. Do you need a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, please visit our website.

Stanje: rabljeno, Manufacturer: SatrindTech Srl Model: F 810 Machine No.: 65489 Shredding chamber: 850 x 590 mm Lhedpfxswvk A Uo Aacsc Center distance between shafts: 215 mm Equipped with 15 kW drive. Crusher is currently being overhauled, sandblasted, and painted.

Leto izdelave: 1985, Stanje: rabljeno, Workpiece diameter: 25-90 mm Thread length: 3000 mm Thread pitch: 2-16 mm Total power requirement: 25 kW Machine weight: approx. 10.5 t Space requirement: approx. m O F F E R We are pleased to offer you, subject to prior sale and error, ex stock without obligation. WALDRICH COBURG Whirling/peeling machine for the production of threads, worms, ball screws or similar workpieces Model: 16 GSL 25-90 / 3 m Year of manufacture: 1985 _____ Thread diameter: 25 - 90 mm Maximum thread length: 3,000 mm Thread depth: Pitch range: 2 – 16 mm Maximum pitch angle up to Ø 55 mm: 15 degrees Maximum pitch angle up to Ø 90 mm: 8 degrees Lodpfx Astzdyzjacohc Stepless whirling head speed: 285 – 1,700 rpm Workpiece speed: 0.5 – 68 rpm Bore of the clamping spindle and tailstock: 90 mm Whirling head drive: approx. 4 kW Total drive: approx. 25 kW - 380 V - 50 Hz Weight: approx. 10,500 kg Accessories / Special equipment: • Stable whirling/peeling unit with 2 leading and 2 trailing pneumatic steady rests with integrated prism guides. Manual adjustment of thread depth and optical pitch angle setting at the carriage. • Powered tool head, normally equipped with 4 tools: 2 base cutters, 1 flank cutter, and 1 deburring cutter. • Workpiece speeds and pitch feed are finely adjustable via change gears. Separate rapid traverse for the return of the whirling support. • Simple peripheral indexing device for whirling multi-start threads. • Retrofitting device for whirling threads longer than the center width using intermediate support. • For correcting pitch errors of the leadscrew, thermal expansion of the workpiece, or errors during retrofitting, the machine is equipped with a compensation system. This allows both electronically programmed compensation of the leadscrew and workpiece-specific linear compensation via a wedge system. • Motor-driven tailstock with automatic stop by contact pressure sensor • Extensive accessories, including cutting tools, tool holders, collets, accessory parts, setting devices, gauges, and service tools. • Central lubrication, coolant system, separate control cabinet, operating manuals The machine is suitable for pre- and finish whirling of single and multi-start right-hand and left-hand threads, worms, ball screws or similar workpieces!

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, skupna masa: 7.000 kg, Ta stroj je konfiguriran s 4 popolnoma elektronskimi CNC osmi in ima integrirano programsko opremo, ki generira samodejni program. Opis: Največji premer zobnika: 400 mm Širina zobnika: 76 mm Hod: 82 mm Obrati: 150 - 700 obr/min Modul: min. 0,5 mm Modul: maks. 6 mm Teža stroja: približno 7500 kg Ledpfx Ajwvbqioacehc Električna oprema: – Obratovalna napetost: 380/400 V – Zaščita: 20kVA Stroj z novim CNC Siemens 808D Siemens pogoni in servomotorji Nova nadgradnja 2025 Zasloni za samodejno generiranje programov Samodejni cikli NR12 Vključen je: Transporter odrezkov Rezervoar za hlajenje Samodejno mazanje Digitalni nadzor tlaka Hidrostatično vodilo

Stanje: rabljeno, Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: D12L/8288, Ponudbena številka: D12L/8288 Vrsta stroja: Stiskalnica za žične žeblje Znamka: WAFIOS Tip: N90 Leto izdelave: 2005 Razpon premera: 2,0-4,0 mm Dolžina žebljev: 50-100 mm Kapaciteta – kos/min: 800 Lhjdpfx Aaswi Uc Eocjc Lokacija: Pri nas na skladišču

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, In this offer, you are purchasing a pre-owned color production system "Xerox iGen 5 Press" Item for sale: 1 x Xerox iGen 5 Press with the following configuration: - including FreeFlow Print Server - including 2x Paperdeck YVC-2 - including Finisher YVC-3 - including 5th color in orange Not the configuration you need? No problem – the machine can be configured according to your requirements. Please feel free to contact us! Meter readings: Total: approx. 15,719,744 pages Condition: This offer refers to a used device, which may show signs of wear (such as minor scratches or yellowing). The device has been tested for functionality A test printout can be seen in the photo Packaging and shipping: You are welcome to inspect the machine during our business hours. Please arrange an appointment! Seaworthy packaging and worldwide shipping are available on request! Lhsdju Ecqbepfx Aacsc Prior to shipping or collection, a functionality test will be recorded on video for you. For further information, please feel free to contact us personally.

Stanje: rabljeno, Leto izdelave: 1988, obratovalne ure: 1 h, številka stroja/vozila: V 516, skupna širina: 2.000 mm, skupna dolžina: 7.000 mm, skupna višina: 1.800 mm, obratovalni tlak: 300 letvica, stiskalna sila: 90 t, maks. debelina aluminijaste pločevine: 5 mm, moč: 11 kW (14,96 KM), lastna masa: 16.000 kg, rezalna sila: 90 t, leto zadnje generalne obnove: 2025, Package dimensions: 400x400 mm Pressing force, stage 1: 900 kN Pressing force, stage 2: 900 kN Steel throughput: 2,500–3,500 kg/h Ledpolhqd Rjfx Aacohc Aluminium throughput: 2,000–3,000 kg/h Drive power: 11 kW Installation area: 7 x 2 x 2.5 m Machine weight: 16 t With wheels or oil collection tray Location: Austria Available from: 30/01/2026