Škarjasto dvigalo

SkyJack SJ4626 ELECTRIC, 10M WORKING HEIGHT, 454KG CAPACIT

Stanje: novo, Ostas 3-Roll Plate Bending Machine SMR-S 2070 x 190 Technical Specifications: Special features included in the price: - Motorized adjustment of lower rolls - Hardened rolls - Motorized adjustment of rear roll - Digital display Sheet width: 2070 mm Max. sheet thickness: 7.0 mm Pre-bending thickness: 6.0 mm Roll length: 2070 mm Smallest bending diameter: 285 mm Roll diameter: 190 mm Weight: 3480 kg Dimensions (LxWxH): 3750 x 920 x 1260 mm Motor: 4 kW Hodpeg Nz T Isfx Alajnl Equipment: - Upper and lower rolls electrically driven - Swing-out upper roll - Conical bending device - Asymmetrical roll arrangement - Self-braking main motor - Separate control and operating console - Safety wire, CE mark

Stanje: pripravljen za uporabo (rabljen), Approx. 120 units = 480 linear meters of safety conductor lines Hjdpfxod Hurbe Alajnl Number of conductors/poles: 5 Standard length: 4 m Conductor rail cross-section: 10 mm² For mains voltage up to: 500 V Continuous duty current rating (100% duty cycle): 60 A Weight per meter: 2.1 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, 1. WEISHAUPT WM-G10/4-A (z plinsko vejo) - Moč: 100-1100 kW - Izvedba: ZM-LN - Leto izdelave: 2020 2. WEISHAUPT WM-G10/3-A (z plinsko vejo) - Moč: 100-1000 kW - Izvedba: ZM - Leto izdelave: 2015 (1 kos), 2013 (2 kosa na voljo) 3. WEISHAUPT WM-G10/3-A (z plinsko vejo) - Moč: 125-900 kW - Izvedba: ZM-LN - Leto izdelave: 2011 4. WEISHAUPT WM-G10/3-A (z plinsko vejo) - Moč: 100-1000 kW - Izvedba: ZM - Leto izdelave: 2011 5. Hodpjwgyrtjfx Alajnl WEISHAUPT WM-G10/3-A (z plinsko vejo) - Moč: 100-1000 kW - Izvedba: ZM - Leto izdelave: 2009

Stanje: dober (rabljeno), Riello RL50 oil burner Output: approx. 15 kg/h Viewing by appointment only—please call in advance! Preferential sale to dealers, commercial traders, or for export. All information is given without guarantee; subject to errors and prior sale. The seller assumes no liability for typographical or data transmission errors. Naturally, we can also handle all formalities for you. Hnedpfx Aspiqipjlajl Loading possible.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2011, nosilnost: 450 kg, dvižna višina: 9.900 mm, lastna masa: 2.300 kg, vrsta goriva: električni, stanje pnevmatik: 70 odstotek, stanje pogona: 75 odstotek, največja dovoljena obremenitev: 454 kg, SKYJACK SJ III 4632 scissor lift in excellent condition for sale. Personnel lift, work platform with extendable deck. Manufacturer: Skyjack Year of manufacture: 2011 Load capacity: 454 kg Working height: 11.7 m Platform height (raised): 9.7 m Overall width: 1.9 m Overall length: 2.3 m Hnedpougtliofx Alajl Gross weight: 2300 kg Non-marking tires Operating hours: 374 TROJAN MOTIVE batteries in good condition. Built-in battery charger

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Oprema: centralizirani mazalni sistem, dokumentacija / priročnik, kaljeni valji, naprava za krivljenje stožcev, nožno daljinsko upravljanje, nujno zaustavitev, zavrtljivi zgornji valj, Krožna valjarna DAVI Valji premera 180 mm Hnjdpoy Emtnsfx Alasl Dolžina valjanja do 3 m Debelina do 15 mm

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1993, vrsta upravljanja: ročni, stopnja avtomatizacije: ročni, vrsta aktuacije: hidravlični, število valjev: 3, premer spodnjega valja: 280 mm, premer zgornjega valja: 300 mm, premer stranskega valja: 280 mm, premer valja: 400 mm, dolžina valja: 4.050 mm, delovna širina: 4.000 mm, delovna višina: 1.100 mm, najv. debelina pločevine: 8 mm, najv. debelina jeklene pločevine: 8 mm, maks. debelina pločevine iz nerjavečega jekla: 6 mm, skupna masa: 11.000 kg, skupna dolžina: 6.000 mm, skupna širina: 1.450 mm, skupna višina: 1.510 mm, moč: 11,03 kW (15,00 KM), vhodna napetost: 380 V, vhodna frekvenca: 50 Hz, Oprema: dokumentacija / priročnik, kaljeni valji, nujno zaustavitev, 3-valjni 4000x8 mm stroj za upogibanje pločevine s pred-upogibanjem Model Famar CPI4/6 KAPACITETA širina pločevine 4000 mm debeljina pločevine 8 mm pred-upogibanje 6 mm --- Uporabna širina valjev 4050 mm Zgornji valj premer 300 mm Stranska valja premer 280 mm Površina vseh treh valjev je ojačana (utrditev) Prikaz položaja upogibnih valjev Hjdpfxsxnmb Is Alaonl Prednja hidravlična odprta stran za raztovarjanje zaprtega ovoja Podaljšane osi za montažo dodatnih valjev za profilno upogibanje Spremenljiva hitrost valjanja do 5 m/min Pogonski elektromotor 15 KM na hidravlični enoti 15 KM - Napetost 380/50 Varnostne instalacije z zasilno zaustavitvijo Dimenzije 6000x1450 x V 1510 mm Teža 11 t

Stanje: dober (rabljeno), prevoženi kilometri: 347.000 km, moč: 265 kW (360,30 KM), prva registracija: 03/2004, vrsta goriva: dizel, konfiguracija osi: 6x4, gorivo: dizel, barva: bela, vrsta prenosa: mehanski, emisijski razred: Euro 3, vzmetenje: zrak, dolžina tovornega prostora: 6.300 mm, Leto izdelave: 2004, Oprema: žerjav, Konfiguracija osi Sprednja os: Krmiljena Zadnja os 1: Vzmetenje: zračno vzmetenje Zadnja os 2: Vzmetenje: zračno vzmetenje Teže Lastna teža: 16.750 kg Dovoljena nosilnost: 9.250 kg Skupna dovoljena masa: 26.000 kg Funkcionalnost Znamka nadgradnje: FASSI F 250 A 25 + JIB CE označba: da Stanje Tehnično stanje: dobro Optično stanje: dobro Hodpfxeychckj Alasnl

Leto izdelave: 2020, stanje: rabljeno, New: Yes Unladen weight: 412 kg Working width: 175 cm Hnjdpfox I Hfcsx Alaol

Stanje: zelo dobro (rabljeno), Epson G10-854SR Robot Assembly Station Dispensing Station The assembly station is divided into the following sub-stations: 3.1 Dispensing Area, 3.2 Assembly Area Heatsink + Front Wall Bracket, and 3.3 Assembly Area Front. (KK = Heatsink, SW = Front Wall Bracket) Hsdpfxsibx S Nj Alasnl St.3.1: Dispensing Area - A workpiece carrier (WT) with mounted chassis and PCB enters the dispensing area via the transfer belt. - It is stopped at the lift-positioning unit (HuPo), lifted off the belt and fixed in place. - Next, the x-y-z handling system moves the dispensing head to the specified location and starts the dispensing process. - After successful dispensing, the handling system moves into the park position and the WT is set back onto the belt. - The carrier is then conveyed to the Assembly Area Heatsink + Front Wall Bracket (provided there is no WT in the placement position). St.3.2: Assembly Area Heatsink + Front Wall Bracket - A WT moves from the dispensing area into the Assembly Area Heatsink + Front Wall Bracket via the transfer belt. - It is stopped at the lift-positioning unit (HuPo), lifted off the belt, and fixed in place; at the same time, the chassis side walls of the partially assembled unit are aligned. - Simultaneously, the heatsink tray and front wall tray are positioned. - A stack of 12 heatsink trays and a stack of 12 front wall bracket trays are manually placed onto the respective infeed belts outside the safety enclosure. - The two safety interlocks are opened and the loaded tray stacks move into the gripping position of each stacker. - The safety interlocks close again. - The corresponding grippers pick up the respective tray. - The tray is separated and transported upwards with the stacker z-axis to above the actual pick-up height. - To center and stabilize the tray, a centering support is pushed and positioned underneath each tray by the x-handling system. - With the stacker z-axis, each tray is set onto its corresponding centering support. - The trays are now ready for component removal. - Using the multi-gripper on the SCARA robot, the heatsink (KK) is gripped from the tray and placed in an intermediate alignment position (to compensate for pickup inaccuracies and ensure a repeatable gripping position for assembly). - The heatsink is scanned, picked up again, and if the scanner result is OK, it is assembled onto the WT. - If not OK, the heatsink is placed in an NOK box. - The SCARA robot multi-gripper then picks up the front wall bracket (SW) from the tray and places it in the alignment position. - The front wall bracket is picked up again and assembled onto the WT. - Proceed to Assembly Area Front. Technical Data Model: SCARA (4-axis robot) Payload: nominal 5 kg, max. 10 kg Horizontal reach: 850 mm Vertical reach: Axis 3: 420 mm Orientation range: J4: +/- 360° Horizontal repeatability: +/- 0.025 mm Vertical repeatability: J3: +/- 0.01 mm Orientation repeatability: J4: +/- 0.005° Max. operating range: Axis 1: +/- 152°, Axis 2: +/- 152.5°, Axis 3: 420 mm, Axis 4: +/- 360° Max. operating speed: J1,J2: +/- 11,000 mm/s, J3: +/- 2,350 mm/s, J4: +/- 2,400°/s Allowable moment of inertia: nom. 0.02 kg*m², max. 0.25 kg*m² User cabling electrical: 1x D-Sub 9 pin, 1x D-Sub 15 pin Z-Axis: Ø outer: 25 mm Press-in force: 250 N Weight: 48 kg Controller: EPSON RC180 Mounting type: ceiling IP Protection class: IP20 Power and signal cables: 3m Financing through our bank is also possible. Complete offer at komplett-konzept.leasingo.de