Vertikalni revolverski stružnica

Skoda SK 125

Stanje: dober (rabljeno), Leto izdelave: 2009, Krmiljenje: Heidenhain iTNC 530 Vreteno * Premer: 180 mm * Vpenjanje ISO 50 * Moč: 51 kW * Hitrost vrtenja: 2000 min⁻¹ (2-stopenjski menjalnik) * Navor: 2668 Nm * Vreteno podpora: 550 mm * Notranje visokotlačno hlajenje Pjdpfxey R N Ile Anpsrc Pomiki * X: 5000 mm * Y: 3500 mm * Z: 2350 mm * W: 1000 mm (Pinola stalno izvlečena 200 mm pri maksimalnem hodu – skupni doseg 1200 mm) Miza * Velikost: 2000 × 2500 mm * Nosilnost: 28 ton * Hidrostatična * Pozicioniranje B-osi: 0,001° (dvojni zobnik, brez zračnosti) Drugo * Menjalec orodja: 60 mest * Siemens osi in vretenasti motorji * Linearne skale na vseh oseh + enkoder za rotacijsko os * Ročni kolešček HR 410 * Transporter za ostružke

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, potovalna razdalja osi X: 8.000 mm, pomik osi Y: 1.300 mm, pomik po osi Z: 2.500 mm, hitro pomikanje X-os: 35.000 m/min, hitri pomik os Y: 40.000 m/min, hitri pomik na osi Z: 40.000 m/min, skupna širina: 5.800 mm, skupna višina: 4.500 mm, skupna dolžina: 13.500 mm, dolžina mize: 10.000 mm, širina mize: 1.250 mm, Travelling column – high performance, precision, and metal removal capacity Linear RAM guide combined with HDS hydrostatic guidance ACD2 milling head with 5,000 rpm and 1,400 Nm torque Aitek ATC chain magazine with 60 positions, L = 400 and Ø 250, max. 35 kg Filtration with high-pressure coolant (IKZ) 15 bar Pedpfx Aoyr Dmdenperc Chip conveyor BLUM 3D touch probe Wide bed, linear guided in X-axis, traverse path W = 930 mm Rotary table drive prepared in control cabinet X-axis: 8,000 mm Y-axis: 1,300 mm Z-axis: 2,500 mm Table length: 10,000 mm Table width: 1,250 mm Spindle power: 40 kW Spindle speed: 5,000 rpm Tool holder: 40 ISO/Bt/Mk X-axis feed: 35,000 mm/min Y-axis feed: 40,000 mm/min Z-axis feed: 40,000 mm/min Milling head auto-index: 0.001 x 0.001 degrees Operating hours: 3,800 h Length: 13,500 mm Width: 5,800 mm Height: 4,500 mm Weight: 45,000 kg Please note: The information on this page has been compiled to the best of our knowledge and, where possible, obtained from the manufacturer. The information is provided in good faith, but accuracy cannot be guaranteed. Therefore, no representation or contractual conditions are implied. We recommend verifying all critical details.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, skupna višina: 2.730 mm, največja dolžina izdelka: 1.470 mm, CMM machine from 2004. This Mitutoyo Crysta-Apex C 776 features a measuring range of 700 mm in both the X and Y axes, and 600 mm in the Z axis. It is equipped with advanced components such as a motorized Renishaw probe head and automatic temperature compensation. If you are looking for high-quality measurement capabilities, consider the Mitutoyo Crysta-Apex C 776 machine we are offering for sale. Contact us for further details. • Accuracy: MPEE = 1.9 µm + 4-L/1000 (with Renishaw TP200 probe) Psdpfx Anjyhgbpspsrc • Temperature Compensation: Automatic temperature compensation (temperature sensor) • Controller: UC200H (including scanning board) Additional Equipment • Probe head: Motorized Renishaw PH10M (7.5°), PHC10-3 head controller, PI200 interface • Probe system: Renishaw TP200 with 3× TP200 STD force modules • Probe changer: Renishaw SCR200 with 6 parking positions • Probe stylus set: Basic stylus kit (5 pieces) • Calibration equipment: Ceramic calibration sphere Ø 20 mm • Software: MCOSMOS v4.3 with CAD option; active modules: GEOPAK, CAT1000S, IGES, STEP, STATPAK, Scanning probe, Laser probe support, export of status information • Computer system: Industrial PC with Windows 10 operating system

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 7213, Manufacturing Origin: Switzerland Net Weight: approx. 2550 kg Customs Tariff: 8458.11 20 Dimensions: 2000x1260x1950 mm TECHNICAL SPECIFICATIONS 10-Axis Machine – Standard Version 10 axes, 6 spindles: Axes and Spindle Designation - 1 sliding headstock: Z1, S1 - 2 independent vertical gang tools: X1Y1, S6 – X2Y2, S2 - 1 combined unit with 4 rotating spindles: X3Z3, S3 - 1 independent sub-spindle: Y4Z4, S4 - 1 independent counter-operation rotating axis: X4, S5 Bar feed position: right side of operator Machine axis height: 1100 mm Main spindle stroke: max. 255 mm Bar capacity: 1 to 16 mm Spindle speed: 12,000 rpm Spindle feed rate: max. 20 m/min Pedsw T Tcwepfx Anporc Bar capacity, min./max.: 13 mm / 16 mm Max. workpiece length: - Guide bush machining: 180 mm - Collet machining: 30 mm Sub-spindle speed: 12,000 rpm Main spindle drive power: 2.2 kW (continuous) / 3.7 kW (intermittent) Sub-spindle drive power: 1.5 kW (continuous) / 2.2 kW (intermittent) Clamping collet, type: F20 (No. 76-201) Guide bush: fixed / rotating Guide bush collet, type: Meister 605 Number of lateral tool stations, combined: - Fixed: 2 x 5 - Rotating: 3 + 3 Number of frontal tool stations, combined: - Fixed: 4 - Rotating: 3 Number of rear tool stations, combined: - Fixed: 3 + 3 - Rotating: 3 + 3 Tool section: 12x12 mm Standard rotating tool holder: ESX 20 Bar feeder: yes Part catcher: yes All technical data is provided without guarantee and subject to change and/or errors.

Stanje: dober (rabljeno), skupna višina: 2.500 mm, skupna dolžina: 5.300 mm, skupna širina: 2.500 mm, dolžina podajanja os X: 1.550 mm, dolžina pomika po osi Y: 600 mm, višina brušenja: 800 mm, skupna masa: 7.800 kg, GER RS 15/60 Surface Grinder Table size: 1500 x 600 mm X-axis travel: 1550 mm Y-axis travel: 600 mm Maximum grinding height: 800 mm Wheel size: 400 x 100 mm Automatic infeed: Yes Dovetail accessory: Yes Podpfx Aovli H Ssnporc Coolant system: Yes Machine dimensions (W x L x H): 2500 x 5300 x 2500 mm Weight: 7800 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, hladilna zmogljivost: 800 kW (1.087,70 KM), skupna masa: 4.500 kg, Oprema: kompresor, zamrzovalnik, Chiller Trane RTUB224 Cooling capacity: 800 kW Number of refrigeration circuits: 1 Refrigerant type: R134A Voltage: 400 V Absorbed power: 176 kW Year of manufacture: 2009 Including dry coolers: 1x Güntner GWH 090.1D/5-M PT: 30.8 bar Prjdorzq Arepfx Anpec PS: 28 bar The specified cooling capacity is based on a water outlet temperature of +7°C and a condensing temperature of +40°C.

Stanje: rabljeno, Gear milling cutter Module 8 20 degrees Predpfx Ansdklt Nspsc Length: 1800 mm Diameter: 120 mm Bore: 40 mm

Stanje: dober (rabljeno), Leto izdelave: 2007, Krmilje 840 D Pedjwzyp Uopfx Anpjrc x-os 2500 mm y-os 2500 mm z-os 1700 mm Krmilje - Siemens Sinumerik 840 D maks. teža obdelovanca - 6000 kg Premer vretena - 130 mm Hod pinole - 700 mm Vpenjalo orodja - ISO 50 DIN 69871 - AD maks. navor na vretenu - 1847 Nm Skupna potrebna moč - 65 kW Teža stroja ca. 45 t Prostorska zahteva ca. 10,9 x 9,3 x 5,7 m

Stanje: zelo dobro (rabljeno), Leto izdelave: 1985, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 4.000 t, Ковашки чук SMERAL тип KJH 4 Пневматично-хидравличен ковашки чук с обратно действие (counterblow hammer). Тегло на плъзгача (рам), кг: 1’800 Номинална енергия на удара, кгм: 4’000 Брой удари на плъзгача, 1/мин: 48 Ход на плъзгача, мм: 500 Площ за монтаж на матрицата, мм: 286 x 600 Минимална височина на матрицата, мм: 350 Мощност на главния двигател, kW: 45 Дължина на машината, мм: 3’100 Pedpfxowbgins Anpsrc Ширина на машината, мм: 1’900 Височина на машината, мм: 3’900 Тегло на машината, кг: 27’000

Leto izdelave: 1999, stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Manufacturer: Arthur Klink Year of manufacture: 1999 Type: Horizontal Broaching Machine Model: RIW 10x1600x400 Weight: 2,700 kg General / Technical Data: Horizontal hydraulic internal broaching machine in nearly new condition, equipped with a tool support system, ideal for the use of flat broaching tools. Broaching stroke: 1,600 mm Pulling force: 10,000 kg (100 kN) Mounting in drawbridge: Ø 85 mm cylindrical Through-hole in clamping table: Ø 100 mm Workpiece diameter: max. 400 mm (limited by tool pan housing) Cutting speed: hydraulically infinitely variable from 1.0 m/min to 9 m/min Return speed: hydraulically infinitely variable from 1 m/min to 24 m/min Machine footprint (W x D x H): approx. 6,400 mm x 1,450 mm x 1,600 mm (excluding work area) Power supply: 400 V, 50 Hz Connected load: 9 kW Equipment: • Machine features electric control for the broaching movement with both manual and automatic operation • Integrated coolant and cutting fluid system • Tool support system for flat broaching tools (no feed mechanism) • Broaching slide with draw head mounting is equipped with flat guides on both sides Accessories: • 1 universal draw head for flat shanks from 3 mm up to max. 25 mm width and a maximum pulling force of 10 kN (10,000 kg) • Complete machine documentation, as well as CE declaration of conformity Remarks: The machine is ideal for producing keyways. Thanks to the combination of the machine's stable bed and the tool support system, it is particularly well suited for easy and fast use of flat broaching tools. Psdpfx Ansr A Hcbjporc The machine has seen very little use and is in like-new condition. The machine is available for inspection at our warehouse and is ready for demonstration under power. Our direct contact details, as well as further information about the machine, can be found in the attached PDF document.