Generator za zasilno napajanje

SISU diesel G 160S

Leto izdelave: 2000, stanje: zelo dobro (rabljeno), Track gauge approx. 20.0 m Lifting height approx. 8.0 m Manufacturer/Overhaul: HILGERS/TEICHMANN Conversion/Overhaul: 2000/2023 Crane equipped with: - Two-rail trolley with 4-corner rope lead-out - Magnetic system pre-installed - Radio remote control - Optional with magnet beam or spreader Dkjdpfx Apjqfc Egslol

Stanje: zelo dobro (rabljeno), Leto izdelave: 1988, Funkcionalnost: omejena funkcionalnost, številka stroja/vozila: 25.05.004, skupna dolžina: 9.500 mm, skupna širina: 2.250 mm, skupna višina: 2.300 mm, vhodna napetost: 380 V, moč: 50 kW (67,98 KM), skupna masa: 21.000 kg, lastna masa: 18.000 kg, priključek za stisnjen zrak: 7 letvica, Oprema: dokumentacija / priročnik, Paper size 730 x 1060 mm and printing area 710 x 1040 mm Paper thickness 0.05 mm - 0.5 mm Set maximum speed (due to simulating sheet travel times of high-speed presses) is 4,000 per hour, but the machine can run much faster for commercial jobs. Four-cylinder central impression drum which completes all four print units in a single gripper closure. 1988 FAG Speedproof with control console for ink fountains and cylinder adjustment, ensuring extremely precise register printing. Attached is an original factory brochure. Fully dry ice cleaned, and the cylinders are in very good condition. This machine is offered strictly on an “as is” basis. Maximum width is 225 cm, maximum height is 230 cm; shipping in a High Cube container is possible. Price is strictly fixed and based on the removal of parts that we could otherwise sell separately, such as: - The Mabeg feeder with vacuum belt infeed; - The four-section Baldwin stainless steel unit, providing each color with its own basin, a mixer, and adjustable temperature—meaning each basin can be set to a different temperature and alcohol content. Dkodpfxeuf Sy As Aplel We have dry ice cleaned the machine. The original intent was to use it prominently for printing electronic paper, but due to excessive startup losses, the project was discontinued. The machine has been with us for three years now, and due to its size I want it sold quickly. Hence, this very low price—it's an excellent machine. If the machine needs to be set up for testing and trial runs, this is possible at an additional cost of €10,000, of which €5,000 must be paid upfront as a deposit under specific conditions. All relevant information can be found in the original FAG brochure available as a PDF via this advertisement. Technical Data - Printing size max.: 710 × 1040 mm (27.95 × 40.94 in.) - Paper size max.: 730 × 1060 mm (28.74 × 41.73 in.) - Paper size min.: 500 × 700 mm (19.68 × 27.56 in.) - Stock thickness: 0.05 – 0.5 mm (0.002 – 0.020 in.) - Plate size max.: 800 × 1080 mm (31.50 × 42.50 in.) - Plate thickness: 0.25 – 0.5 mm (0.010 – 0.020 in.) - Speed max.: 4,000 sheets/h - Floor space requirement (incl. access to feeder, delivery and central control desk): 950 × 525 cm (374 × 206.69 in.) - Press height: 230 cm (90.55 in.) - Weight (including paper stacked in feeder and delivery): approx. 18,000 kg (approx. 39,690 lb) - Total power requirements: approx. 50 kW - Compressed air supply: 6 – 7 bar

Stanje: pripravljen za uporabo (rabljen), številka stroja/vozila: 03890317, Machine number: 03890317 // Condition and details as per images Dedst A A Aqjpfx Aplekl

Leto izdelave: 2021, stanje: novo, Aluminum angle conveyor belt including mobile subframe Horizontal section: 1500mm (adjustable) Inclined section: 2500mm (adjustable) Angle at the bend selectable: 30°, 35°, 40°, or 45° Polyamide swivel castors with locking brakes Conveyor belt width: 400mm (adjustable) We supply our conveyor belts in PVC, PU, or rubber. PVC conveyor belt incl. carriers and wave edge Djdpfohh A Uqox Apljkl Drive: Motor 0.25 kW (adjustable), speed 0.3 m/sec Connection: 220/240V, 50Hz, protection class IP54 Drive etc. ready for connection, motor control optional 6x adjustable machine feet for alignment Wave edge: 40x35mm (adjustable) T-20 cleats - 400mm pitch (adjustable) 2-ply, extra cross-stable Our core competence is delivering exactly what the customer truly needs. We work together with our customers to develop custom, application-specific solutions and supply appropriate systems from our own production. Feel free to contact us by phone to find the right solution for your application. Conveyor belt, conveyor system, discharge belts, belt conveyors, magnetic separator, overband magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overband magnet, magnetic belt separator.

Leto izdelave: 2021, stanje: novo, Aluminium flat belt conveyor without substructure Conveyor length: 4000 mm Drive roller: knurled Return roller: crown-faced, turned Our core competency lies in delivering exactly what the customer truly needs. Dodpfx Apjhfwcbslskl We work in close cooperation with our customers to develop customized, application-specific solutions and supply corresponding systems manufactured in-house. Please feel free to contact us by phone to find the right solution for your application. PVC conveyor belt Conveyor belt type EM 15/2 0+17 PVC white, FDA compliant according to EU10/2011 Belt width: 500 mm (external) Wave edge welded on both sides, 40 mm high T-30 cleats – 400 mm pitch * Antistatic due to conductive threads in the running side fabric Endless welded with stepped finger splice Food-grade certificate included V2A stainless steel support plate, full-surfaced Drive: Motor approx. 1.1 kW * Optionally controllable via frequency inverter Connection: 220/400 V

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2023, Usable working area: 2000x3000mm, Z-axis: 50mm, positional repeatability across the entire area: ±0.05mm, X/Y/Z addressable resolution: 0.001mm, max. acceleration: 15m/s², max. working speed in XY-axis: 2000mm/s, drives: X/Y system with linear motors, Z-axis with servomotor, laser safety class: class 1 with cover hood, base frame: robust welded steel structure, axis system: X/Y/Z axes of motion, drive: linear motor drive, contactless and low-wear, unloading system: extension 2000mm, conveyor: aluminum slat conveyor with servo motor drive, pressure roller: for material feed, laser source: 300W CO2 laser, sealed and maintenance-free, cooling: closed water circuit with water chiller for the laser, cutting head: 5-inch lens, cutting nozzle, cutting gas supply, extraction: extraction tray for small parts and dust, software: CAM control software ICARO, motorized brush width: 2000mm, SEI PC console: PC not included, to be provided by customer, extraction unit: 2x extraction blowers at 5.5kW each, scanner: manual barcode scanner, unwinding device: for material rolls with unwinding bar, unwinding system: connection available. The system was only set up and accepted, serial operation has not taken place. On-site inspection possible, documentation available. Dodpfx Aswbuzfsplokl

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 4NTV88BXIHR, skupna masa: 848 kg, vrsta goriva: dizel, kapaciteta rezervoarja: 190 l, barva: rdeča, moč: 16 kW (21,75 KM), izhodna napetost: 400 V, izhodna frekvenca: 50 Hz, vrsta izhodnega toka: trifazni, nazivna moč: 16 kW (21,75 KM), nazivna (navidezna) moč: 20 kVA, neprekinjena moč: 16 kW (21,75 KM), neprekinjena (navidezna) moč: 20 kVA, skupna dolžina: 2.150 mm, skupna širina: 1.040 mm, skupna višina: 1.550 mm, največja hitrost vrtenja: 1.500 obr/min, proizvajalec motorjev: Yanmar, vrsta hlajenja: voda, poraba goriva (kombinirana): 3 l/100 km, poraba goriva (mestna vožnja): 3 l/100 km, poraba goriva (izven mesta): 3 l/100 km, gorivo: dizel, kapaciteta rezervoarja za gorivo: 190 l, kapaciteta baterije: 100 Ah, napetost baterije: 12 V, vhodna napetost: 380 V, vhodna frekvenca: 50 Hz, vhodni tok: 32 A, obratovalna temperatura: 25 °C, temperatura okolja (min.): −25 °C, okoljska temperatura (maks.): 45 °C, višina krmilne omare: 1.550 mm, dolžina elektro omare: 2.150 mm, širina krmilne omare: 1.040 mm, raven hrupa: 65 dB, vrsta zaščite (IP koda): IP65, vrtljajska hitrost (min.): 1.500 obr/min, temperatura: 25 °C, vrsta vhodnega toka: trifazni, trajanje garancije: 12 meseci, Oprema: dokumentacija / priročnik, mobilni rezervoar za dizel, The Bredenoord 20 KVA generator is a reliable and versatile solution for both temporary and long-term power requirements in various environments. This genset is ideal for mobile use and complies with Stage V emission standards. The efficient Yanmar engine, in combination with a Stamford alternator, delivers excellent performance and low operational costs. The generator is housed in a sound-attenuated enclosure that ensures minimal noise emission, making it ideal for use in noise-sensitive environments (super silent). The casing features thick, oil-resistant sound insulation and external socket outlets equipped with automatic circuit breakers for enhanced safety. With its 190-litre fuel tank, the generator offers up to 48 hours of autonomy during continuous operation. The system runs on diesel, HVO, or GTL fuel, providing flexible fuel options. ### Technical Specifications: - Model: Bredenoord 20 KVA - Rated Power: 20 KVA - Maximum Power: 20 KVA - Engine: Yanmar 4TNV88BXIHR - Generator: Stamford brushless alternator (AVR) - Power Output: 20 KVA - Voltage: 230/400 V, 50 Hz - Speed: 1500 rpm - Noise Level: 65 dB(A) at 7 meters - Fuel Tank Capacity: 190 litres - Autonomy: - 100% PRP: 40 hours - 70% PRP: 56 hours - Engine Output: 16 KW - Battery Charger and Engine Pre-Heater: Standard - Control Panel: Comap MRS16 (auto start/stop) - Dimensions (L x W x H): 3.38 m x 1.03 m x 1.5 m - Weight: 848 kg - Emission Class: Stage V ### Fuel Consumption: - 100% PRP: 4.7 L/h - 70% PRP: 3.42 L/h - 50% PRP: 2.3 L/h ### Options: - Engine pre-heating - Battery charger - 3-way fuel valve - XXL fuel tank Sound Attenuation: The generator is engineered with optimised air inlets and specialised insulation materials to minimise noise. The sound insulation is reinforced with multi-thickness wool to reduce noise across a wide frequency spectrum, making it ideal for use in noise-restricted areas. Durability: The enclosure is corrosion-resistant, featuring a paint system tested for over 2000 hours (C5I-H standard), ensuring long service life even under the most demanding conditions. Safety: The generator is equipped with reinforced locks and stainless steel hinges. The doors are designed with a 20-degree beveled edge to prevent water retention and minimise oxidation. Transport and Handling: Easy to move thanks to reinforced lifting eyes and steel beams, ensuring straightforward transport on construction sites. The robust design guarantees stable and secure relocation without risk of damage. Customised Configurations: The Bredenoord 20 KVA generator is available in various configurations from 20 KVA to 500 KVA. Customer-specific modifications are possible, so the generator can be adapted to specific requirements and applications. Certifications: Dedev Rnciopfx Aplskl - CE Certified - European manufactured Applications: The generator is suitable for a range of industries, including construction, industrial applications, and other sectors that require reliable and efficient power supply.

Stanje: dober (rabljeno), Leto izdelave: 1962, Rapid radial drilling machine, radial drilling machine, drilling machine, cantilever drilling machine, rapid-action radial drilling machine Dodpfsirax Usx Aplokl -Clamping table: 400 x 1100 mm -Arm reach: 930 mm -Taper: MT4 -Motor power: 1.35/1.8 kW -Spindle speeds: 41–1700 rpm -Column diameter: Ø 200 mm -Spindle stroke: 125 mm -Tapping device: YES -Feed: 0.075 – 0.3 mm/rev -Dimensions: 1800/1235/H2240 mm -Weight: 1500 kg

Leto izdelave: 2026, stanje: novo, BEFARD XP602 Vacuum Suction Cup for Glass Installation • Maximum load capacity: 600 kg • 8 suction cups • Dual-speed vacuum system • Vacuum release pilot • Battery-powered • Manual 360-degree rotation • Locks at each 90-degree increment • Fully adjustable for vertical and horizontal alignment Additional options: Dksdpfx Apoiauz Njljl • HS spacer • Spare battery • Transport trolley • Mesh box pallet Other models available: Grippers with load capacities of 300 kg, 450 kg, 800 kg, 900 kg, 1000 kg Available in your desired color

Stanje: rabljeno, System: Used piston-diaphragm high-pressure pump / feed pump Type: HMD-G-50-500 Flow rate: 40.0 m³/h Pressure: 1.6 MPa Dksdpfxsdkdi To Aplol