Tovarna za peskanje

SIGG TR 70 S

Stanje: rabljeno, CNC multi-spindle automatic lathe INDEX MS 32 C Ffsdpeuhaqbsfx Aflst

Stanje: dober (rabljeno), Leto izdelave: 2011, številka stroja/vozila: MS 1153, Technical data (approximate): - Access opening to blasting chamber: W 370 x H 170 mm - Blast nozzle - Door opening to blasting chamber - Blast media pressure vessel - Blast media recovery system - Separate control panel - Space requirement for blasting unit: 1600 x 2000 x H 1750 mm - Space requirement for blast media container: 1200 x 1200 x H 2250 mm - Cartridge filter with extraction fan MUNK - SCHMITZ - Air volume: 700 - 1500 m³/h - Extraction fan: 3 kW - Space requirement for filter unit: 1600 x 1600 x H 3250 mm Fjdpfxjllvr De Afleft - Motor-driven infeed roller conveyor: 4 m - Non-driven roller conveyor: 3 m - Roller width approx.: 800 mm - Roller conveyor height approx.: 700 mm

Stanje: novo, NEW MACHINE - Wet suction available in steel or stainless steel - Extraction capacity 1,650, 3,750 or 7,000 m³/h Ffjdpsci Tlrefx Aflet - Motor 3, 5.5 or 15 kW

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, obratovalne ure: 36 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1024-54, Country of manufacture: Switzerland Voltage: 380/50/3 Net weight: approx. 1600 kg Customs tariff number: 8460.2920 Dimensions: 235x155x145 cm TECHNICAL SPECIFICATIONS: MAIN DIMENSIONS: Center height: 100 mm Distance between centers: 400 mm LONGITUDINAL SLIDE: Maximum travel: 420 mm Minimum automatic travel: 1 mm Table feed rate: 100–3500 mm/min Reversal dwell time: 0–5 sec Table tilt angle (400/650 mm): 30°/15° CROSS SLIDE: Maximum travel: 170 mm Rapid traverse: 30 mm Plunge depth per diameter: 1.9 mm Feed 1: 0.03–1.5 mm/min Feed 2: 0.02–0.3 mm/min Plunge feed per pulse: 0.0005–0.025 mm WHEELHEAD: Grinding wheel (diameter x width x bore): 350 x 32 x 127 mm Drive power: 3 kW Peripheral speed: 30 m/s Spindle speeds: 1600/1975/2200 rpm Manual travel: 120 mm Swivel range to the right: 15° + 30° Optional wheelhead guard for max. wheel set width: 50 mm WORKHEAD: Swivel range: 0°–90° Spindle speeds (nw): 80/175/380/800 rpm Internal taper: Morse 4 Collets: W-20 Drive power: 0.5 kW Max. workpiece weight: 20 kg Max. load during unsupported grinding: 12 Nm Optional continuously variable drive, adjustment range I: 30–300 rpm Optional continuously variable drive, adjustment range II: 120–1200 rpm TAILSTOCK: Internal taper: Morse 2 Quill travel: 20 mm GUARANTEED WORKING ACCURACY: Straightness of generator: Between centers 400 mm Measured over 400 mm: 0.002 mm Between centers 650 mm Measured over 650 mm: 0.003 mm Roundness deviation for unsupported grinding: 0.0004 mm CONNECTION VALUES: Power consumption: max. 8 kVA Admissible voltage variation: –15% to +10% Admissible frequency variation: +/- 3% Ffjdpfxjw T Sc Ns Aflot Compressed air: 5 bar Unless otherwise stated, technical data is provided without obligation or warranty.

Stanje: rabljeno, TECHNICAL DATA - Number of spindles: 6, independently controlled - Bar capacity: 32 mm - Max. spindle speed: 6,300 rpm - Machine equipped with 28 CNC axes - Slide unit 1.1: X and Z axes CNC controlled - Slide unit 2.2: X and Z axes CNC controlled - Slide unit 3.1: X and Z axes CNC controlled - Slide unit 3.2: X and Z axes CNC controlled Fodpsuhauyofx Aflsft - Slide unit 4.1: X and Z axes CNC controlled - Slide unit 4.2: X and Z axes CNC controlled - Slide unit 5.1: X and Z axes CNC controlled - Slide unit 5.2: X and Z axes CNC controlled - Slide unit 6.1: X and Z axes CNC controlled - Slide unit 6.2: X and Z axes CNC controlled - Counter spindle at position 6.1 EQUIPMENT - Control: INDEX C200-4 (Siemens SINUMERIK 840D) - Simple NCU - Bar feeder magazine: IEMCA SIR MS32/33/P - Coolant tank: KNOLL AE 1076 * with high-pressure pump - Chip conveyor: KNOLL VRF 500 - Part evacuation with conveyor at position 6

Stanje: novo, potovalna razdalja osi X: 1.050 mm, pomik osi Y: 600 mm, pomik po osi Z: 640 mm, hitro pomikanje X-os: 36.000 m/min, hitri pomik os Y: 36.000 m/min, hitri pomik na osi Z: 32.000 m/min, proizvajalec krmilnikov: HEIDENHAIN, model krmilnika: TNC 7, širina mize: 550 mm, dolžina mize: 1.150 mm, največja hitrost vrtenja: 15.000 obr/min, skupna masa: 7.500 kg, dovod hladilne tekočine: 20 letvica, moč vretenovega motorja: 17 W, nos vretena: SK 40 BIG PLUS (BVD 40), število mest v zalogovniku orodij: 30, dolžina orodja: 300 mm, premer orodja: 150 mm, teža orodja: 8 g, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, TOVARNIŠKO NOV 3-OSNI OBDELOVALNI CENTER Krmljenje in motorji: Digitalni krmilnik HEIDENHAIN TNC 7 s 16" zaslonom HEIDENHAIN paket (motorji, merilni sistemi, ročni obroč) Ffjdpfjhy Ar Tsx Aflot Dodatna oprema: Priprava za 4. os (vrtljiva miza) Popolno ohišje s stranskimi dvižnimi opazovalnimi okni Natančnosti: Natančnost pozicioniranja: ± 0,005 mm Ponavljajoča natančnost: ± 0,003 mm Obravnavana bodo le povpraševanja iz Nemčije

Stanje: rabljeno, TECHNICAL DATA Ffjdpfeuhavdox Aflot - Number of spindles: 6 - Max. diameter: 32 mm - Spindle speed: 6,300 rpm - Slide unit 1.1: X and Z axes CNC controlled - Slide unit 1.2: X and Z axes CNC controlled - Slide unit 2.1: X and Z axes CNC controlled - Slide unit 2.2: X and Z axes CNC controlled - Slide unit 3.1: X and Z axes CNC controlled - Slide unit 3.2: X and Z axes CNC controlled - Slide unit 4.1: X and Z axes CNC controlled - Slide unit 4.2: X and Z axes CNC controlled - Slide unit 5.1: X and Z axes CNC controlled - Slide unit 5.2: X and Z axes CNC controlled - Slide unit 6.1: X and Z axes CNC controlled with counter spindle - Slide unit 6.2: X and Z axes CNC controlled EQUIPMENT - CNC Siemens 840D - Counter spindle - Dual operator console - Dual NCU - Bar feeder: IEMCA SIR MS32 F - Coolant tank: KNOLL * with high-pressure pump - Chip conveyor: KNOLL - Cooling unit: Riedel WTS 030.02-NE - Discharge system with 2 CNC axes - Fire extinguishing system: KRAFT UND BAUER *Note: Functionality not guaranteed. Must be inspected by a qualified company appointed by the buyer.

Stanje: dober (rabljeno), Premer brušenja: 450 mm Dolžina brušenja: 600 mm Ffsdpsxcblqefx Aflst Višina konic: 140 mm Premer obdelovanca: 280 mm Število vrt./min vretena: 63 - 400 Hitrost brusnega kolesa: 20–35 m/s Potrebni prostor cca: 2,4 x 1,9 x 2,1 m Ta okrogla brusilka je v dobrem stanju, takoj na voljo in jo je možno pod napetostjo preizkusiti pri prodajalcu. OPIS: - Naprava za notranje brušenje - Hladilna enota - Samodejni pomiki Razdalja med konicama: - 430 mm vključno s collet vpenjalom in nastavljivo glavo - 600 mm do konusnega držala brez glave

Stanje: rabljeno, TECHNICAL DATA - Number of spindles: 6, independently controlled - Bar capacity: 32 mm - Max. spindle speed: 6,300 rpm - Machine equipped with 32 numerical axes - Slide unit 1.1: X and Z axes NC-controlled - Slide unit 1.2: fixed X-axis, Z-axis NC-controlled - Slide unit 2.1: fixed X-axis, Z-axis NC-controlled - Slide unit 2.2: X and Z axes NC-controlled - Slide unit 3.1: X and Z axes NC-controlled - Slide unit 3.2: fixed X-axis, Z-axis NC-controlled - Slide unit 4.1: X and Z axes NC-controlled Fodpfx Asuhangsfloft - Slide unit 4.2: fixed X-axis, Z-axis NC-controlled - Slide unit 5.1: fixed X-axis, Z-axis NC-controlled - Slide unit 5.2: X and Z axes NC-controlled - Slide unit 6.1: X and Z axes NC-controlled - Slide unit 6.2: X and Z axes NC-controlled - Counter spindle at position 6.1 EQUIPMENT - Control: INDEX C200-4 (Siemens SINUMERIK 840D) - Simpel NCU - Bar feeder: IEMCA SIR MS32/33/P - Oil supply unit with high-pressure pump - Chip conveyor: KNOLL - Cooling unit: RIEDEL - Workpiece ejection with conveyor at position 6 - Cross drilling units at positions 3.1 and 4.1

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, Dust Extractor for Blast Cabinet Sandblasters – Complete Unit with Motor and Filter This dust collector is a comprehensive extraction solution equipped with a motor and filter, ensuring efficient removal of dust and particles generated during blasting operations. It significantly improves visibility inside the blast cabinet and eliminates dust leakage, creating safer and more hygienic working conditions. Particularly suitable for large-volume blast cabinets, this unit ensures a clean environment and optimal operational safety. Device Description The dust extractor designed for blast cabinet sandblasters is a fully integrated solution featuring a powerful motor and high-efficiency filter. It is ideal for a wide range of blasting applications, especially in large-scale enclosures where dust management is crucial. The advanced design efficiently draws dust directly from the sandblaster, resulting in improved visibility during operation and preventing dust from escaping the working area. This enhances workplace hygiene and safety by providing a cleaner and healthier atmosphere for operators. The built-in motor delivers robust suction performance, ensuring reliable and effective extraction of media dust, while the filter retains fine particles to prevent their recirculation into the cabin’s air. This offers superior protection for operators against inhalation of hazardous substances and maintains high air quality within the blasting area. The dust collector is not only a highly effective cleaning solution, but it also enhances occupational safety and increases both the efficiency and precision of blasting operations. Technical Data Extraction Power: 1100W Airflow Capacity: 3 m³/min Power Supply: 230 V / 50 Hz Noise Level: 85 dB Inlet Diameter: 52 mm Handle Length: 280 mm Collector Dimensions (H x D): 730 x 260 mm Filter Dimensions (H x D): 310 x 170 mm Weight: 9.5 kg Please note: The price stated is net (excl. VAT) and does not include shipping costs. For more information, please contact us via phone or email. Visit our website to view the full product range. Fedpfx Aerh E Azjfleft