BHKW - plinska turbina

siemens SGT600

Stanje: rabljeno, Leto izdelave: 1994, Technical Details: Production Capacity: 2 x 4.8 MW Number of Generators: 2 units Fuel Tank Volume: 480 m³ Fuel Type: Gas + Oil Complete Power Plant Fully Overhauled at the end of 2005: - 2 combustion engines, 12-cylinder V-type engine by Maschinenwerke Halberstadt, Type: 12 VDG 48/42 AL - suitable for GAS and OIL 2 Generators by Leo Somer with: - electrical output per unit: 4.6 MW Hedpfx Aou Nxatjdksni - mechanical output per unit: 4.8 MW (approx. 6,500 hp) - thermal output per unit: 4.8 MW 2x Heat Recovery Boilers: - Power feed-in: Medium voltage 10 kV (direct to grid). Additional equipment: - Heat exchanger, catalytic converter, control room, medium voltage network, oil treatment systems, intermediate tanks + fuel storage tanks 4.8 m³

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 211031, Country of manufacture: Switzerland Voltage: 380/50/3 Net weight: 740 kg Overall dimensions: 155 x 110 x 160 cm Installed power: 2.10 kW Customs tariff: 8459.6930 TECHNICAL SPECIFICATIONS Vertical Rectangular Table: - Usable surface: 740 x 200 mm - Number of T-slots: 2 - T-slot width: 12-H7 - Distance between T-slots: 120 mm Fixed Angle Plate Table: - Usable surface: 700 x 250 mm - Number of T-slots: 5 - T-slot width: 12-H7 - Distance between T-slots: 40 mm - Lateral travel: 250 mm total Universal Tilting Table: - Usable surface: 600 x 210 mm - Number of T-slots: 4 - T-slot width: 12-H7 - Distance between T-slots: 40 mm - Lateral travel: 350 mm total - Swivelling range on three planes, on either side: 30°- 45°- 30° Spindle Taper: - Horizontal spindle housing: ISO 30 (40) - Vertical milling head: ISO 30 (40) - Universal quick-change head: SV E20+ES20 Vertical Swivelling Range: Vertical milling head: 360° Longitudinal travel: Hand/automatic: 320/300 mm Vertical travel: Hand/automatic: 375/355 mm Transverse travel: Adjustment handle: 150 mm Quill travel: 60 mm Reading accuracy with micrometric vernier: 0.02 mm Main motor (kW/rpm): 1.5/1500 Feed motor (kW/rpm): 0.45/3000 Coolant pump motor (kW/rpm): 0.15/3000 Spindle speed: - 1st range (rpm): 58-375 - 2nd range (rpm): 330-2000 Working feeds - longitudinal or vertical (mm/min): 12-400 - 10 feed rates (mm/min): 12-18-26-38-57-85-125-185-270-400 Rapid traverse (mm/min): Longitudinal or vertical: 1200 Subject to errors or omissions, the technical data is provided without guarantee. Hsdpfxjw Uc Npe Adkjni

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vrsta vhodnega toka: trifazni, potovalna razdalja osi X: 1.524 mm, pomik osi Y: 660 mm, pomik po osi Z: 610 mm, število mest v zalogovniku orodij: 40, proizvajalec krmilnikov: Hurco, skupna višina: 3.298 mm, skupna dolžina: 5.662 mm, skupna širina: 3.921 mm, skupna masa: 10.900 kg, dolžina mize: 1.676 mm, širina mize: 660 mm, model krmilnika: MAX5, vrtilni moment: 118 Nm, razdalja od središča mize do nosu vretena: 622 mm, moč vretenovega motorja: 36.500 W, število vreten: 1, hitri pomik na osi Z: 2 m/min, hitro pomikanje X-os: 3 m/min, hitri pomik os Y: 3 m/min, premer vrtljive mize: 600 mm, največja hitrost vrtenja: 100 obr/min, nos vretena: BT40, največja hitrost vretena: 12.000 obr/min, obremenitev mize: 1.360 kg, premer orodja: 75 mm, dolžina orodja: 249 mm, teža orodja: 7 g, Oprema: CE označba, transportni trak za ostružke, 🔹 Zum Verkauf: Hurco VMX60SRTi 5-Achs CNC-Bearbeitungszentrum Baujahr 2016 – Hervorragender Zustand 🔹 Hersteller: Hurco Modell: VMX60SRTi Baujahr: 2016 Maschinentyp: 5-Achs CNC-Bearbeitungszentrum Zustand: Hervorragend Steuerung: Hurco WinMax mit Touchscreen Standort: Irland 📌 Maschinenübersicht: Zum Verkauf steht ein Hurco VMX60SRTi 5-Achs CNC-Bearbeitungszentrum in exzellentem Zustand, ausgestattet mit leistungsstarken Features sowie Hurcos flexibler Schwenkkopf- und Drehtisch-Konfiguration. Das Modell von 2016 bietet herausragende Zugänglichkeit der Werkstücke, hohe Fräsleistung und eine zuverlässige Software für anspruchsvolle 5-Achs-Bearbeitungen. Der große Arbeitstisch erlaubt sowohl vollwertige 5-Achs- als auch klassische 3-Achs-Bearbeitungen und bietet maximale Flexibilität für Werkzeug- und Formenbau, Luft- und Raumfahrt sowie allgemeine Präzisionsfertigung. ✅ Besondere Merkmale & Inklusivoptionen: Touchscreen mit schattierter 3D-Grafik (Echtzeit) 2GB RAM | 120GB SSD | USB-Anschlüsse Hnedpfx Adsuyt U Tokoi Ultimotion High-Speed-Software (Profilierung & Daten-Glättung) S-Kurven-Beschleunigung & Look-Ahead-Finish-Steuerung Spindelkühlmittelzufuhr (CTS) NC4 Laser-Werkzeugvermessung Renishaw RMP60 Werkstückmesstaster Software-Optionen: Mould Maker Suite (3D Swept Surface, Helix-Eintritt, Restbearbeitung) DXF-Import, Ultipocket, Adaptipath Ultimonitor + Ultinet (Vernetzung/Ferndiagnose) Dialog-/NC-Merge Schwenkbare B-Achse & C-Achsen-Drehtisch Flexible Programmierung: Dialog oder G-Code 🔧 Technische Daten: Tischgröße: 1676 x 660 mm Drehtischdurchmesser: 600 mm max. Auflast (Flachbett): 1360 kg max. Auflast (Rundtisch): 500 kg X-Achse: 1524 mm Y-Achse: 660 mm Z-Achse: 610 mm B-Achse Schwenkbereich: ±92° C-Achse Rotationsbereich: 360° Spindel Nase bis Tisch: 13–622 mm Spindeldrehzahl: 12.000 U/min Spindelaufnahme: BT40 Spindelleistung: 36,5 kW Spindelmoment: 118 Nm bei 2.900 U/min Werkzeugwechsler: 40 Plätze max. Werkzeugdurchmesser: 75 mm max. Werkzeuglänge: 249 mm max. Werkzeuggewicht: 7 kg Eilgang X/Y: 32 m/min | Z: 24 m/min Rundtischdrehzahl: 100 U/min Elektr. Anschlusswert: 70 kVA Maschinenabmessungen (LxB): 5662 x 3921 mm Höhe: 3298 mm Maschinengewicht: 10.900 kg 📈 Ideal geeignet für: Luft- und Raumfahrt & Verteidigungsteile Werkzeug- und Formenbau Komplexe 3D-Flächenbearbeitung Mehrseitenbearbeitung in einer Aufspannung Hochpräzise Teilefertigung Hurco VMX60SRTi zu verkaufen 5-Achs CNC-Bearbeitungszentrum Gebrauchte Hurco CNC-Maschine Hurco 5-Achs CNC Irland Bearbeitungszentrum mit Rundtisch Hinweis: *Die Angaben erfolgen nach bestem Wissen, jedoch ohne Gewähr*

Stanje: rabljeno, Leto izdelave: 2004, Suhi v epoksi zalit distribucijski trifazni transformator, proizvajalec TESAR Italija, leto proizvodnje 2004, moč 2500 kVA, napetostni razmerje 20 (2x±2,5%)/0,4kV, AN-AF (prisilno prezračevanje, stalna preobremenitev 30 %), Dyn11, uk=6 %, IP00, standardne izgube, delujoč, popolna dokumentacija in kosovni protokol. Hodpfxowpb Ets Adksni

Stanje: novo, Leto izdelave: 2025, največja hitrost vretena: 8.000 obr/min, hitrost vretena (min.): 8.000 obr/min, 1 Mehrspindel-Drehautomat TORNOS SAS16-DC im Wiederaufbau - neuer Schaltschrank SIEMENS oder FANUC, wählbar Hodpfxsugl S Is Adkoni – Abholtisch mit Bremse – verstellbarer Anschlag mit Gegenbetrieb – 3 unabhängige Vorschubsysteme – mehrere Werkzeughalter und Bohrvorrichtungen – Trommelstangenführung mit Unterstützung – Optionen: automatischer Stangenlader IEMCA PRA, numerisches Gewindeschneiden, CNC-Querschlitten, etc. Kontaktieren Sie uns.

Stanje: dober (rabljeno), valjčni brusilni stroj Hnjdpfetrgndex Adksi

Stanje: dober (rabljeno), Leto izdelave: 1994, Funkcionalnost: popolnoma funkcionalen, dolžina podajanja os X: 1.050 mm, dolžina pomika po osi Y: 360 mm, dolžina podajanja os Z: 500 mm, potovalna razdalja osi X: 1.050 mm, pomik osi Y: 360 mm, pomik po osi Z: 500 mm, skupna masa: 3.000 kg, Oprema: dokumentacija / priročnik, Tiger FO 135 Universal Milling Machine Description: The machine was purchased new in 1994 and has only seen minimal hours of operation. The milling machine is fully functional. The axis movements are smooth and the guides are in good condition, featuring an automatic lubrication system. The table is also in very good condition, with barely any signs of wear. The machine is equipped with a digital readout (DRO) for all three axes, allowing for work with tool compensation and repeated measurement processes. Both the machine and the DRO are supplied with operating manuals. Technical Specifications: • Table dimensions: 1,400 x 340 mm, 4 T-slots • Automatic travel: ➢ Longitudinal (X): 1,050 mm ➢ Cross (Y): 360 mm Hedpfxsrqwbij Adkoni ➢ Vertical (Z): 500 mm • Spindle taper clamping: ➢ Vertical axis: ISO 40, automatic locking ➢ Horizontal axis: ISO 40, manual locking • Spindle speed range: ➢ Vertical axis: 33 to 1,560 rpm, 12 speeds ➢ Horizontal axis: 35 to 1,550 rpm, 12 speeds • Installed drives: ➢ 5 kW vertical spindle motor ➢ 7.5 kW horizontal spindle motor ➢ DC motor, 15 Nm • Infinitely variable feed rate: 0 – 1,500 mm/min • Rapid traverse: ➢ Longitudinal and cross: 3,000 mm/min ➢ Vertical: 1,500 mm/min • Universal head with 80 mm manual quill travel • Automatic lubrication with pump • Low voltage electrical controls on side arm control panel • Star-delta start • Magnetic thermal protection by Siemens • Net weight: 3,000 kg • Machine dimensions (for transport): ➢ Width: 2,300 mm ➢ Depth: 2,900 mm ➢ Height: 2,400 mm Accessories: • Counter supports for cutter arbor • Cutter arbor ø32 mm

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, 400 kVA transformatorska postaja, letnik 2019, postaja UK220-2.9X, transformator DOTUL400/10 letnik 2013, oljni transformator, 10kV ±2x2,5 %/400V, z VN vtikačnimi preboji AK, z NN porcelanskimi preboji, kazalni termometer. Hnodpfxjxzq Hbs Adksi

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, največja hitrost vretena: 1.800 obr/min, potovalna razdalja osi X: 470 mm, pomik po osi Z: 3.250 mm, moč vretenovega motorja: 75.000 W, skupna masa: 21.500 kg, število osi: 3, Ta 3-osni DOOSAN PUMA 600LM je bila izdelana leta 2007. Opremljena je z 45° nagnjenim ležiščem iz litega železa in prizmatičnimi vodili z drsnim materialom Rulon 142. Vreteno omogoča razpon vrtljajev od 15 do 1.800 min⁻¹ in največji navor 9.025 Nm. S prehodom palice 152 mm in kontinuiranim vrtenjem C-osi ne zamudite priložnosti za nakup tega horizontalnega stružnega centra DOOSAN PUMA 600LM. Za dodatne informacije nas kontaktirajte. Hjdpfx Adsyi Uwbjkeni • Vodila: prizmatična z drsnim materialom Rulon 142 • Vreteno: • Priključek: ASA A2-15 • Največji navor: 7.220 / 9.025 Nm • Kapaciteta palice: 152 mm • C-os: kontinuirano interpolirana, ločljivost 0,001° • Osi: • Število osi: 3 (X, Z, C) • Vrtenje C-osi: ±360° neprekinjeno • Podajalne hitrosti: • Hitri pomik X-os: 12 m/min • Hitri pomik Z-os: 10 m/min • Največji interpolirani podajalni pomik: 500 mm/obrat • Premer krogličnih vreten: Ø 50 / 63 mm

Stanje: rabljeno, Leto izdelave: 2016, The Mazak VTC 800 series is a range of high-performance, large-format 5-axis machining centers designed for large workpieces. They are renowned for their high precision and rigidity, making them ideal for aerospace, energy, and heavy machinery applications. Key features include integrated spindles, fast tool changes, and efficient complete machining capabilities. Accessories: - Tool magazine for 30 tools - Tool length measurement and tool breakage detection - Factory preparation for chip conveyor (left side) Hodpsx Idwiofx Adkeni - Magazine (HSK) for 155 tools - Workpiece air blast system - Signal light (end of machining: yellow) - Additional work area lighting - Coolant gun - Air blast system through the spindle - Preparation for 70 bar coolant supply, incl. interface for high pressure unit - Automatic operator door opening/closing - Mazak Monitoring System B RMP 60 (only/H/V) - Brankamp collision monitoring system - 2 Renishaw TS27R tool setting devices - NC rotary table - Holding device for vertical use of NC rotary table - Table center partition for pendulum machining - 3D model of work area in STEP format - 5-axis milling technology - Knall Compact Filter KF400/2300 (filter capacity 400 l/min, tank capacity 2300 l) - High-pressure cooling 70 bar, 7 pressure stages - Chip conveyor with hinged belt design - Additional M-codes 1 set = 2 M-codes - Preparation for double extraction system (mechanical connection) Ø 198 mm - Transformer for European market - 1 set of manuals in electronic format on CD - 1 set of adjustment tools - Foundation set (anchor bolts + plates) - MAZAK standard color - Work area lighting Additionally: - Air extraction unit AirFresh FMN V12 (installed on both sides and coupled with door sensor) - Holding device for vertical operation of the rotary table - 2 x Renishaw TS27R integrable tool setting devices Spare parts: - Y-axis motor for tool magazine - Motor for linear axis shifter - Motor for rotary axis shifter - Cylinder for swivel unit Technical Data: - Width: 3500 mm - Length: 820 mm - X-axis travel: 3000 mm - Y-axis travel: 800 mm - Z-axis travel: 720 mm - Min. distance spindle nose to table top: 140 mm - Max. distance spindle nose to table top: 860 mm - Max. table load: 2500 kgf - B-axis: ± 110 degrees - Main spindle: HSK63 - Max. spindle speed: 18,000 rpm - Min. spindle speed: 35 rpm - Rated power (100% duty cycle): 33.0 kW - Rapid traverse X-Y & Z-axis: 50 m/min - Table width: 3500 mm - Table length: 820 mm - T-slot width: 18 mm - Number of T-slots: 7 - T-slot spacing: 100 mm - Table height from floor: 870 mm - Tool changer places (standard): 30 - Tool changer places (option): 48 - Tool selection method: shortest path - Tool shank: steep taper 40 - With adjacent stations occupied: 80 mm - With adjacent stations free: 130 mm - Max. tool weight: 8 kgf - Total tool magazine weight: 150 kgf - Max. tool length: 350 mm - Tool change time (chip-to-chip): 4.7 s - Power supply: 400 V / 50/60 Hz - Air pressure: 5 – 9 bar - Air consumption: 260 l/min - Tank capacity: 500 l - Dimensions (H x L x W): 3376 x 5480 x 4051 mm - Weight approx.: 16,300 kg - Color: Grey / Black