Zobniški motor 0,25 kW 26,5 vrt / min

Siemens 1LA5070-4AB22-2K49

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, pritisk: 16 letvica, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, temperatura: 400 °C, vhodna napetost: 6.000 V, vrtljajska hitrost (min.): 1.500 obr/min, največja hitrost vrtenja: 1.500 obr/min, vrsta hlajenja: zrak, Industrial Steam Turbogenerator Howden – Model KK&K TWIN CA46, NEW, never installed or commissioned, still under manufacturer’s warranty. Due to a revision of long-term industrial strategy, an industrial Howden KK&K TWIN CA46 steam turbogenerator, complete according to original OEM supply, is available for sale. The unit is BRAND NEW, entirely manufactured and tested at OEM level, but has never been installed or put into service. It remains covered by the manufacturer’s warranty and is stored in a closed, controlled environment. Immediate availability eliminates the standard lead time, which for this class of equipment is typically 24–36 months. Main scope of supply: - Steam turbine on skid with integrated gearbox - Synchronous generator supplied separately Turbine technical configuration: - Model: KK&K TWIN CA46 - Double-casing turbine (Steam Part A + Steam Part B) - Integrated 3-shaft gearbox (2 pinions + central wheel) - Controlled steam extraction between HP and LP sections (included) Kedeyidvdopfx Aczenb Key design conditions: - Inlet steam pressure (HP): 16 bar(a) - Inlet steam temperature: 400 °C - Electrical output at terminals: up to 1,595 kW - Rated speed: 1,500 rpm Electrical generator: - Three-phase synchronous generator - Rated power: 1,994 kVA - Voltage: 6 kV – Frequency: 50 Hz - Cooling: IC31, air - Brushless design, ready for grid-parallel operation Included systems: - Integrated base-mounted oil system - Main mechanical oil pump and auxiliary electric pump - Local control panel on skid - Control and protection panel with Siemens SIPROTEC 5 - Electronic speed and pressure governor - Independent overspeed protection device - ENC-RfG turbogenerator simulation model Typical applications: - Industrial cogeneration plants - Process steam energy recovery - Biomass and waste-to-energy facilities - Combined generation of electric power and process steam Condition and status: - Condition: NEW - Manufacturing year: late 2024 - Never installed – never commissioned - Still under manufacturer’s warranty - Complete OEM technical documentation available - Installation and commissioning possible with OEM support Possible application fields: - Biomass and waste-to-energy plants for the production of electric power and process steam, with immediate unit availability and no multi-year production lead times - Industrial cogeneration (CHP) in facilities with continuous process steam consumption (paper, food, chemical, manufacturing industries) - Revamping/repowering of existing plants as a rapid alternative to new OEM units with 24–36 month lead times Price: on request. Further technical details and documentation available upon request.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1987, Pressing force: 320 t Sheet thickness: 0 mm Stroke rate: 80 strokes/min Total pressing force: 320 t Knodpfx Acevwgl Nszob Stroke: 30 – 80 mm Clamping surface (lower table): 630 x 740 mm Clamping surface (upper table): 630 x 630 mm Total power requirement: 60 kW This fineblanking press FEINTOOL HFA 320 was completely overhauled in 2019 and is in an as-new condition with a new CE marking. MAIN RAM Total force (nominal): 320 t Stroke min.: 30 mm Stroke max.: 80 mm V-RING Nominal force: 160 t Stroke: 30 mm COUNTER RAM Nominal force: 80 t Stroke: 30 mm TOOL DIMENSIONS Lower table width: 630 mm Lower table depth: 740 mm Upper table width: 630 mm Upper table depth: 630 mm Max. daylight: 320 mm ELECTRICAL SPECIFICATIONS Total power consumption: 60 kW

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, CEVNA UHT STERILIZATOR ZA SOKOVE PROIZVAJALEC: KF ENGINEERING, NEMČIJA KAPACITETA: 11 TON NA URO PRIMEREN ZA VSE VRSTE SOKOV, VKLJUČNO S PARADIŽNIKOM Ksdpfxsv Tl D Ne Aczsnb NAJVIŠJA TEMPERATURA: 124 °C KRMILNI SISTEM: PLC SIEMENS-7

Stanje: dober (rabljeno), Leto izdelave: 2010, Horlemann HR10U-S Switchgear 12 kV HR 10U – the universal switchgear for industry and utilities Modular medium-voltage switchgear system for solar power distribution Switchgear details: Manufacturer: Horlemann Switching configuration: KKÜHTTT Model: HR10U-S Rated voltage: 12 kV Rated current: 630 A Short-circuit capacity: 20 kA/1s Height: 2060 mm Width: 1300 mm Depth: 800 mm Cell width: 7 x 650 mm Busbar: AL 50 x 10 mm Weight: approx. 620 kg HR10U Rated Data: Ur: 12 kV Ir: 630 A Kjdpfx Aconfu Dyszenb Up: 75 kV Ik: 20 kA (1s) Ud: 28 kV Ip: 50 kA Fr: 50 Hz IAC: AFL 25 kA (1s) Degree of protection: IP4X According to IEC-62271-200 (VDE 0671-200); 2003-11 TMC Cast Resin Transformer: Design: Cast resin iPrimary voltage: 10 kV Secondary voltage: 400-230 V Connection: Dyn5 Year of manufacture: 2010 Height: 1740 mm Width: 1300 mm Depth: 900 mm Weight: 1.8 t The pressure relief of the switchgear is provided via a pressure relief chamber in the lower section of the switchgear panel. Documentation: Test report Wiring diagram Financing is also available through our bank. komplett-konzept.leasingo.de You will find more new and used items in our shop! International shipping costs on request!

Stanje: novo, Leto izdelave: 2016, 1 piece of factory-overhauled, unused industrial bevel helical gearbox by ASUG, TGL 21815. All gearbox components have been replaced, except for the housing! Claw coupling: 800 mm (only one half available) Maximum torque: 27,829 Nm Knjdpfogwlrdsx Aczsb Gear ratio: i = 1:80 Maximum power: 51 kW Oil fill: 170 kg Input speed (n1): 1400 rpm Output speed (n2): 17.5 rpm Weight: 1,450 kg Shaft diameter d1: 65 mm Shaft diameter d2: 160 mm Shaft height h1: 500 mm Total height h2: 925 mm Base length: 1,170 mm !! Gearbox is supplied WITHOUT oil cooler !!

Stanje: dober (rabljeno), Tehnični podatki: Pogonski motorji / Motor Količina: na voljo 4 kosi Proizvajalec: SEW Eurodrive Stanje: dobro (rabljeno) Moč: 50Hz / r/min 1461/228 kW 1,5 S1 Knedpfx Aef N Hdxsczob Rešitve po meri za vašo intralogistiko Za valjčne proge, tračne transporterje, poševne transporterje ali teleskopske naprave za nakladanje in razkladanje vašega blaga smo vaš kompetenten partner! Z veseljem pripravimo individualno ponudbo ali svetujemo pri načrtovanju in montaži. Sporočite nam vaše potrebe in lokalne pogoje. Izkoristite naša dolgoletna izkušnja in odlično mrežo strokovnjakov. Za podjetja iz različnih panog, kot so logistika, farmacevtska industrija, obrt ali elektronika, smo že uspešno realizirali projekte. Skupaj bomo poiskali načine za stroškovno učinkovito in trajnostno optimizacijo vaših procesov in materialnega toka. Poleg tega lahko ponudimo tudi popolnoma avtomatsko sortirsko tehniko ali dodatne komponente, kot so regalni sistemi za komisioniranje ali zabojniki.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Funkcionalnost: nepreverjeno, teža obdelovanca (maks.): 2.500 kg, skupna širina: 3.200 mm, skupna dolžina: 15.800 mm, razdalja med središči: 6.000 mm, premer obdelovanca med konicama: 850 mm, skupna masa: 19.000 kg, Ponujamo zelo dobro CNC cilindrično brusilko Hol-Monta spol.sro UB 85 / 6000, letnik 2014. Model: UB 85 / 6000 CNC Tip krmiljenja: Kavalir K 51-2 Kjdpfxjy Hgrgs Aczsnb Serijska številka: H 214 09 005 Premer nihanja: 850 mm Razdalja med konicami: 6.000 mm Priključek za notranje brušenje Stabilizatorji itd.

Stanje: rabljeno, Leto izdelave: 1984, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 1.800 mm, pomik osi Y: 1.500 mm, pomik po osi Z: 2.000 mm, obremenitev mize: 5.000 kg, premer vretena: 110 mm, skupna višina: 3.800 mm, skupna dolžina: 5.000 mm, skupna širina: 3.000 mm, dolžina mize: 1.520 mm, širina mize: 1.225 mm, dolžina podajanja os X: 1.800 mm, dolžina pomika po osi Y: 1.500 mm, dolžina podajanja os Z: 2.000 mm, Nosilec orodja SK50, Heidenhain krmiljenje, stroj je pripravljen za prevzem in takoj pripravljen za uporabo. Knedpfsxga Tnsx Aczeb

Stanje: zelo dobro (rabljeno), SK 50 tool holders (28627) various manufacturers: Knedpfowl U Tcjx Aczsb - Bilz - Kelch - Sandvik - Clarkson Approx. 90 pieces

Stanje: rabljeno, Leto izdelave: 1973, Spindle diameter: 130 mm X travel: 3,000 mm Y travel: 2,000 mm Total power requirement: 4.5 kW Machine weight approx.: 30 t Boring spindle diameter: 130 mm Spindle taper: SK 50 Working area: X – Column longitudinal travel: 3,000 mm Y – Spindle housing vertical travel: 2,000 mm Z – Spindle stroke: 1,000 mm Table size (lower): 3,300 x 2,400 mm Load capacity per m²: 10 t/m² Mounted table approx.: xx,000 mm Min./Max. position of working spindle above table: 770 / 2,770 mm Feed rate: 0.9 – 2,000 mm/min Rapid traverse for spindle headstock and column: 5,000 mm Quill feed: 0.5 – 1,200 mm/min Spindle speed range, partially infinitely variable: 4.5 – 1,250 rpm Machine weight: approx. 30,000 kg Accessories / Special equipment: • Heidenhain 3-axis digital readout, hardened guideways, ball screws • Infinitely variable spindle speeds and feeds, individually motorized feed drives • Operator’s traveling platform, pendulum panel control, manual hand panel, platform • Hydrostatic column displacement • Planed clamping plate 3,200 x 2,500 mm with T-slots, auxiliary table approx. 1,400 x 2,600 x 900 mm (H), one side face machined • Hydraulic clamping for column/carriage, motorized tool clamping • Extensive accessories including tool holders with and without tools • Separate chip extraction system, clamping aids, 1 clamping angle plate and plates, and much more Kjdpfx Aot Hwt Sjczsnb