Perm magnet motor

SIEMENS 1 FT 5074-0AF01-0-Z

Stanje: pripravljen za uporabo (rabljen), Siemens 1FT5074-0AF01-2 - Z AC-VSA-motor Z= glej tipsko ploščico, SN: YFS729644201001, motor je bil generalno obnovljen pri Siemensu in nato dolgo skladiščen, rabljen, z običajnimi sledovi uporabe, 100 % delujoč, obseg dobave po fotografijah. Fodji D Sxkjpfx Apljgb

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 107.44.00.407, potovalna razdalja osi X: 800 mm, pomik osi Y: 650 mm, pomik po osi Z: 500 mm, proizvajalec krmilnikov: Heidenhain, model krmilnika: iTNC 530, teža obdelovanca (maks.): 500 kg, skupna višina: 3.200 mm, skupna širina: 3.200 mm, širina mize: 600 mm, višina mize: 2.400 mm, dolžina mize: 600 mm, vrtljajska hitrost (min.): 50 obr/min, največja hitrost vrtenja: 20.000 obr/min, skupna masa: 10.000 kg, največja hitrost vretena: 20.000 obr/min, moč vretenovega motorja: 15.000 W, število vreten: 1, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, La MIKRON UCP 800 Duro de l’année 2018 est un centre d’usinage 5 axes haute performance, équipé d’une commande Heidenhain iTNC 530. La machine offre des courses de 800 x 650 x 500 mm (X/Y/Z) ainsi qu’un axe C avec plage de pivotement sans fin de 360°. Les types de broche/adaptateur NCD 150 PL et NCD 200 PL avec raccord HSK-E63 sont installés. Le système de table représenté n’est actuellement pas monté. L’équipement comprend un convoyeur à copeaux, un système de refroidissement avec filtre ainsi que la documentation complète. La machine est disponible à l’enlèvement, chargement sur camion, et a très peu tourné dans l’ensemble. Fedpfx Apex D Ux Tjlsgb Les heures de fonctionnement parlent d’elles-mêmes : Control ON : 30 064 h Machine ON : 10 322 h Program Execution : 4 159 h Drives ON : 7 331 h Spindle ON : 4 231 h La machine est sous tension et peut être démontrée à tout moment.

Stanje: pripravljen za uporabo (rabljen), Siemens 1FT5074-0AF01-2 – Z AC-VSA-motor, Z= glej tipsko ploščico, serijska št.: E9J10906199006, rabljen, običajni znaki uporabe, 100 % delujoč, obseg dobave po slikah. Fedpfx Asi D Sw Ujpljgb

Stanje: pripravljen za uporabo (rabljen), Siemens 1FT5074-0AF01-0 - Z Permanent Magnet Motor SN:E0Y60613801004 , Z= H40: Lubrication, re-lubrication device DE and NDE, K31: Nameplate, second nameplate loose inside terminal box, K83: Terminal box, terminal box rotated by +90 degrees, used, heavy signs of use, 100% functional, scope of delivery as per photos Fsdpfx Asuca Shspljgb

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Prima Industrie Platino 1530 laser cutting machine with only 4300 cutting hours This Prima Industrie Platino 1530 laser cutting machine, 4.0kW CO2, was manufactured in Italy in 2011 and installed at the end of 12/2011. Equipped with PRIMACH 20 L control unit. Fgodpfsivg Hgex Apleb

Stanje: dober (rabljeno), Leto izdelave: 2015, potovalna razdalja osi X: 650 mm, pomik osi Y: 650 mm, pomik po osi Z: 650 mm, 1 Horizontal machining center Make: STARRAG HECKERT, Model: HEC 400D, Year: 2015 Control system: Siemens Sinumerik 840D Travel X/Y/Z = 650 x 650 x 650 mm 2-station pallet changer, pallet size: 400 x 400 mm NC rotary table 360° x 0.001° 80-position tool changer Fgodeuav H Nepfx Apleb Tool holder: HSK 63 Spindle speed: 15,000 rpm Internal coolant supply (IKZ) 50 bar Chip conveyor, band filter, coolant temperature control, spindle cooling Sound and control cabinets Operating hours: 43,698 Spindle hours: 5,401

Stanje: rabljeno, Leto izdelave: 1985, x-axis travel: 485 mm y-axis travel: 385 mm z-axis travel: 380 mm Table clamping surface: 800 x 460 mm Spindle taper: SK 40 Control: CONTOUR 1 Spindle speeds: 50 - 2500 rpm Feeds: 10 - 1000 mm/min Rapid traverse: 2 m/min Table load capacity: 600 kg Quill stroke: 80 mm Total power requirement: 7.5 kW Machine weight approx. 2.0 t Dimensions L x W x H: 2.4 x 1.7 x 1.98 m Accessories: Vertical head with hydraulic tool clamp and extendable quill, fixed table, coolant system Fsdstqqllopfx Aplogb - X/Y/Z axes can also be operated via handwheels -

Stanje: rabljeno, številka stroja/vozila: 7979, Table diameter: 400 mm Table with 8 T-slots: 12 mm Overall height: 175 mm Required space: 600 x 450 x 175 mm Weight: approx. 100 kg Fsdpfx Apjb Ez R Uelsgb

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, obratovalne ure: 12.959 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 650 mm, pomik osi Y: 500 mm, pomik po osi Z: 450 mm, največja hitrost vretena: 12.000 obr/min, skupna višina: 2.450 mm, skupna širina: 2.400 mm, skupna dolžina: 3.100 mm, širina mize: 630 mm, dolžina mize: 630 mm, obremenitev mize: 350 kg, skupna masa: 6.800 kg, Kunzmann WF 650 5-Axis Machining Center, Simultaneous (2009) Manufacturer: Kunzmann Model: WF 650 5-Axis Machining Center, Simultaneous Year of Manufacture: 2007 Commissioning: 2009 Condition: Used, very good Machine ON hours: 46,181 h Spindle hours: 12,959 h Control: Heidenhain iTNC 530 Software package 1 for iTNC 530 X-axis: 650 mm Y-axis: 500 mm Z-axis: 450 mm Swiveling range of vertical milling head: -5° to +95° NC rotary table diameter: 630 mm Table load capacity: 350 kg Fgjdpfsxwl T Usx Apljb Spindle speed: 12,000 rpm Tool holder: SK40 Tool changer with 20 tools ICU: Tool clamp with coolant supply and air blast device through the spindle, delivery rate 25 l/min at 40 bar Selectable water/air through the spindle Paper band filter CNC-controlled milling head (B-axis) Preparation kit for probe TS 640 3D probe with infrared transmission Dimensions (LxWxH) approx.: 3.1 x 2.4 x 2.45 m Weight approx.: 6,800 kg Coolant system (LxWxH) approx.: 1.6 x 2.00 x 0.50 m Scope of delivery: – Documentation – Machine levelling feet – Machine lamp

Stanje: rabljeno, Leto izdelave: 2002, Cutting diameter / mm Saw band length / mm Cutting width / mm KASTO tec AC5 band saw automatic machine Sawing capacity: 23 kW Machine weight: 5.9 t Fedpfsxrg E Iex Aplegb Year of manufacture: 2002 Cutting ranges in mm (approx.): Round: 530 mm Square: 530 x 530 mm Flat: 530 x 630 mm Smallest workpiece to be cut: 10 x 10 mm Minimum cutting length: 6 mm Minimum remnant length single cut: 10 mm Minimum remnant length automatic operation: 35 mm Automatic material feed single max. (standard): 600 mm Automatic material feed single max. (option): 1500/3000 mm Material feed multiple: 9999 mm Machine roller conveyor length: 1568 mm Max. piece weight: 2275 kg Cutting speed: 12–120 m/min (infinitely variable) Cutting feed: infinitely adjustable Material feed: with ball screw spindle Automatic feed: with horizontal clamping vise Material clamping: hydraulic, infinitely adjustable Clamping force Main machine vise: 200–1000 daN Feed vise: 200–2000 daN Saw band tension: hydraulic, factory set Saw band cleaning: by easily replaceable double brushes, hydraulically driven Coolant tank volume: approx. 185 l Pump capacity: approx. 25 liters/min Upon request, we can also offer you the 4 immediately available saw bands at an additional cost.