Varjenje tabele

SIEGMUND Workstation Sytem 28

Stanje: zelo dobro (rabljeno), Swing diameter over bed 1000 mm Distance between centers 2000 mm Center height 500 mm Swing diameter over cross slide 700 mm Spindle bore 128 mm Spindle speeds 6.4–1,600 rpm Fsdpfowhkdcjx Afljft SIEMENS 810 D control system Various accessories MARCELS MASCHINEN CH

Stanje: rabljeno, številka stroja/vozila: 242350148, A Flott TB23L bench drill is being offered here. The bench drill is mounted on a special lift table (not the original lift table). Technical specifications: - 6-step speed adjustment (manual via pulley) Ffjdpfxolf Evco Aflot - MK2 taper fitting

Stanje: novo, Swing diameter 420 mm Turning length 1500 mm Swing diameter over cross slide 250 mm Swing diameter in the bed gap 590 mm Center height 210 mm Turning length in the bed gap 260 mm Spindle speed(s) 16 (45-1800) rpm Tailstock taper MK 4 Quill stroke 120 mm Quill diameter 50 mm Spindle nose DIN ISO 702-2 No. 6 Spindle bore 52 mm Spindle taper MK 6 Longitudinal feed 17 / 0.05 - 1.7 m/min Face feed 17 / 0.025 - 0.85 m/min Total power requirement 4.6 kW Ffsdpfek Egrpsx Aflot Machine weight approx. 1340 kg Space requirement approx. 2440 x 915 x 1375 mm Fully equipped lead and feed screw lathes. TH 4215 with digital position display DPA 21 / 3462070 - Hardened and ground Z-axis guideways - Spindle mount Camlock DIN ISO 702-2 No. 6 - Precisely machined carriage - Handwheels with adjustable fine graduation 0.04 / 0.02 mm - Four-way tool post - All guides adjustable with gib strips - Top slide adjustment range ± 90° - Guaranteed spindle nose concentricity better than 0.015 mm - Main spindle runs in oil bath - Gear wheels smooth-running, hardened and ground, mounted with 2 adjustable precision taper roller bearings - Handwheels decoupled and tested to EN 23125 - Two-channel right-left selector switch tested to EN 23125 - Switches with life cycle calculation, tested to EN ISO 13849 - All metric threads from 0.2 to 14 mm/rev and all inch threads from 72 to 2 TPI adjustable via control panel shift lever, no change gears required - Forward/reverse on carriage operable via shift spindle - Central lubrication in carriage - Machine base and bed cast as single Meehanite piece - Leadscrew cover - Emergency stop pedal - Safety handwheels with disengagement function in X and Z axes - Tailstock adjustable ± 10 mm for taper turning - Tailstock quill and handwheel with adjustable fine graduation 0.025 mm - Rapid, simple, tool-free adjustment via clamping lever - Strongly ribbed prismatic bed, induction-hardened and precision ground, made of cast iron - Coolant system with separate tank, fill level indicator, and oil separator; easy and complete draining and cleaning to DIN standard - LED machine lamp at chip guard Models TH 4210D and TH 4215D with digital position display DPA21 - User-friendly membrane keypad, splash-proof, sealed and glare-free - Glass linear scales Scope of delivery - Fixed steady rest, capacity Ø 15 - 145 mm - Travelling steady rest, capacity Ø 10 - 75 mm - LED machine lamp - Reducing sleeve MK 6 / MK 4 - Fixed center MK 4 - Change gear set - Position stop with fine adjustment - Initial machine fill with quality oil - Operating tools Including special accessories: OPTIMUM 3-jaw lathe chuck, self-centering, Ø 250 mm Quick-change tool post SWH5-B set

Stanje: rabljeno, Leto izdelave: 1982, številka stroja/vozila: 18613, KUNZMANN Universal Tool Milling Machine Model UF 6 NR Ffsdpfxoiqkc Ij Aflet Year of manufacture: 1982, 2 gearbox stages 1400/2800 rpm, Table size: 860x240 mm, 3 T-slots 14 mm, spindle taper SK30, Travel distances: X/Y/Z = 450/200/430 mm, spindle speeds horizontal: 18 steps from 32-1342 rpm, vertical: 18 steps from 72-2988 rpm, 12 feeds on the X-axis, separate coolant tank, chip tray, machine lamp, 3 horizontal milling arbors each with cutter, 2 overarm arbor supports, 1 collet chuck with key, 1 machine vice with crank handle.

Stanje: rabljeno, L + Z Lathe WEILER Type LZ PRIMUS GS Machine No. 2461 Year of manufacture approx. 1990 Centre distance: 400 mm Swing over bed: 250 mm Centre height over bed: 125 mm Swing over cross slide: 140 mm Centre height over cross slide: 70 mm Spindle bore: 24 mm Spindle speed: 60 - 3000 rpm, 18 steps Feed: longitudinal and cross Chuck flange: short taper DIN 55022 Size 4 Tailstock taper: MT 2 Drive power: 1.1 kW and 1.5 kW, pole-changeable Power supply: 380 Volt, 50 Hz - 3-axis digital readout FAGOR, Type 30i-T-B - Spindle speed via 2 motor speeds and 9 gearbox steps - 3-jaw chuck RÖHM Ø 125 mm with stepped jaws - QUICK-CHANGE TOOLPOST MULTIFIX with 1 insert cartridge - Collet set Ø 1 / 3 / 4 / 5 / 7 / 8 / 10 / 14 / 15 / 16 / 17 / 19 / 20 / mm - 1 centring tip for collet chuck Ffodpfxortd Uwo Afljt - Emergency stop - Folding chuck guard - Splash guard - Machine lamp - Electrical diagram - Machine mounted on a steel plate (Steel plate L x W x H 1200 x 500 x 30 mm, 140 kg) Required floor space (L x W x H): 1200 x 900 x 1560 mm Weight: 520 kg Good condition

Stanje: novo, Table diameter: 350 mm Table load capacity: 0.1 t Swivel range: 0–90 degrees Table load horizontal: 100 kg Table load vertical: 50 kg Bore diameter: 30 mm Table rotation speed: 0.5 – 5 rpm Ffodpfx Aogvkk Nsflet Voltage: 230 V Total power requirement: 0.2 kW Machine weight approx.: 0.2 t Required space approx.: 0.5 x 0.5 x 0.5 m Welding Table with Hollow Shaft D-DWP Rotary tilt tables with bore for rotating, tilting, and welding small workpieces up to 100 kg. - Rotary and tilt axis - Steplessly adjustable speed - Compact design - Including foot pedal

Stanje: dober (rabljeno), Leto izdelave: 1992, Automatic Band Saw, Manufacturer: JAESPA, Type: W400 AZ Control: Minipos 807, Year of manufacture: 1992 Cutting diameter for round material: max. 400 mm Saw blade dimensions: 5500 x 32 x 1.1 mm Automatic feed, minimum cut-off length: 20 mm Chip conveyor Total power requirement: 4 kW Weight: approx. 2,500 kg Ffsdpfx Afegf H Saslst Accessories: 2 x saw blades, roller conveyor (6 m, motorized drive), machine documentation available Space requirements: 2.8 x 2.8 x 2 m

Stanje: zelo dobro (rabljeno), 90 running meters pallet racking Stow Used equipment, very good condition, see photos Height: 6 m Depth: 100 cm Beam length: 2.70 m Load capacity per level: 3,000 kg Frames: blue Beams: orange Negotiable price: €8,650 net ex stock Ffedpjiwkn Refx Aflot Offer includes: + 33 pcs pre-assembled frames, 12 t bay load, 100 cm deep, 6 m high + 192 pcs beams, 2.7 m long, 3,000 kg load capacity per level + 384 pcs locking pins + 132 pcs concrete anchors + Load capacity plates Goods are in stock. Transport and installation available on request. Inspection possible at any time by appointment. Further information on request. Constantly over 5,000 linear meters of pallet racks from various manufacturers in stock. (Subject to changes and errors in technical data, specifications and prices as well as prior sale! Please refer to our terms and conditions, all prices excl. VAT ex stock) Purchase / Sales We are constantly looking for and offering a variety of items from diverse sectors - broom-clean clearances - business liquidations - fast – flexible – efficient! - We also clear and/or dispose of items for insolvency administrators. Send us a few key points and we will contact you promptly. To visit our site, please click on our logo!

Stanje: zelo dobro (rabljeno), The SB-10 grinding machine enables flawless grinding of boring bars, thread-cutting tools, parting-off tools, or boring bar steels made of HSS or carbide for jig boring machines or lathes. By selecting the correct rake angle to suit the respective material, you achieve optimum utilization and a longer service life of the tools. These boring bars are still mostly ground by hand today and are subsequently used on high-quality machine tools. On the SB-10, the steels are ground using a profiled grinding wheel at the circumference. The desired profile is achieved effortlessly with a dressing diamond and the template mounted on the machine. For excellent stability and surface quality, the horizontal carriage is mounted on cross-roller guideways. Grinding wheel (ØxWxB): 125 x 20 x 20 mm Speed: 2800 rpm Longitudinal adjustment: 130 mm Transverse adjustment: 80 mm Height adjustment: 65 mm Rake angle: +25° to -10° Ffodpfofqicxex Aflst Dimensions (W x D x H): approx. 550 x 450 x 650 mm Weight: approx. 70 kg

Stanje: novo, Leto izdelave: 2025, nosilnost: 2.000 kg, Protec KT 2000 HV, hydraulically height-adjustable Load capacity: 2000 kg Handheld remote control with digital display Double foot pedal control Height approx. min. 800 mm (tilted to center), max. height 1400 mm Ffodpfencfvhjx Aflet Min. horizontal height: 1000 mm Faceplate diameter: 1200 mm Minimum tilt angle: 135° Speed: 0.05 to 0.9 rpm Motor power: 3 kW