Dodatki za varilno mizo

SIEGMUND SET 3 / 28

Stanje: novo, Table length: 2400 mm Table width: 1200 mm Table height (side panel): 200 mm Weight: 1069 kg Space requirement: approx. 2400 x 1200 mm SIEGMUND Authorized Dealer – all items available! The welding tables are equipped with a scale as standard. Special set – including 28-piece Tool Set 3 Product Description - Through-hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 24.5 – 27 mm - Side panel made from high-quality S355J2+N steel + plasma nitriding - Bore diameter: Ø 28 mm Fsdpoxabffefx Afljpb - Bore holes on the surface in diagonal grid pattern - Edges, corners, and holes rounded - Side panel height: 200 mm - Bore holes on the side panel in diagonal grid pattern - Includes surface scaling - Design reinforced by ribs - Grid lines enable precise setups Plasma-nitrided version: - Protection against rust / scratches / adhesion of welding spatter - Corrosion-resistant / increased load capacity Specifications and Features: - 28-hole pattern / Dimensions: 2400 x 1200 x 200 mm - Plasma-nitrided Extreme 8.7 model with scale - Diagonal grid on table surface - Diagonal grid on the side panel - Incl. 4x basic equipment feet - Including 28-piece Tool Set 3: + 10x 280610.N Clamp + 6x 280630.N Clamp + 4x 280648.1.N Prism + 24x 280510 Dowel Pin + 4x 280740 Magnetic Dowel Pin + 8x 280410.N Stop + 8x 280420.N Stop + 6x 280110.N Angle Bracket + 2x 280152.N Angle Bracket + 2x 280162.N Angle Bracket + 1x 280166+67.N Angle Bracket + 1x 283999 Accessory Set

Stanje: novo, Pre-bending: 13.0 mm Working length: 3100 mm Plate thickness: 16.0 mm Total power requirement: 17.5 kW Approx. weight: 11,600 kg Feded Auacjpfx Aflopb Dimensions (LxWxH): 5.31 x 1.66 x 1.59 m Image similar Bending capacity: 16.0 mm » at 3x top roll diameter Pre-bending: 13.0 mm » at 1.5x top roll diameter Top roll diameter: 300 mm Bottom roll diameter: 270 mm Side roll diameter: 210 mm Maximum opening: 50 mm Working height: 1140 mm • Fully hydraulic drive of top and bottom rolls via planetary gearbox • Digital display for side roll positions • Hydraulic drop-end bearing • Cone bending device • Hardened rolls • Hydraulic adjustment of side rolls synchronized via PLC • Hydraulic adjustment of bottom roll via torsion shaft • Pressure-adjustable bottom roll • Electrical and hydraulic overload protection • Movable control panel • Operating manual in GERMAN and ENGLISH • Machine and equipment in compliance with CE regulations Important notes on cone rolling: • The maximum sheet thickness is 50% of the rated capacity • The cone length may be max. 30% or must be more than 60% of the roll length • Hardened rolls are recommended

Stanje: novo, Number of positions: 65 Fsdsupw Stepfx Aflepb Hole diameter: 28 mm Condition: New Weight: 49 kg Basic Set 3: 69-piece, 28mm system, consisting of: Clamps: 10 x 280604 Pins: 18 x 280511 Stop: 10 x 280420.N Angle bracket: 6 x 280110.G Angle bracket: 4 x 280162.N Threaded pins: 8 x 280543 Stop: 8 x 160415 Stop: 4 x 284050 Accessory set: 1 x 163999 Price is exclusive of packaging and shipping.

Stanje: novo, Table length 3000 mm Table width 1500 mm Table height 850 mm Lateral clamping surface: 200 mm (height) Weight 1518 kg SIEGMUND authorized dealer - all items available! Product description - High-quality steel S355J2+N with plasma nitriding - Material thickness approx. 24.5 – 27 mm - Bore diameter Ø 28 mm - Bores on surface in a 100x100 mm grid - Corners, edges, and bores rounded - Side panel height 200 mm - Hole spacing on side panel 50 mm - Including surface scale - Rib-reinforced construction - Grid lines enable precise setups The welding tables are equipped with a scale as standard. Special set – including 28-piece tool set 3 Plasma-nitrided version: - Protection against rust / scratches / welding spatter adhesion - Corrosion resistant / higher load capacity Fodpfew U U N Usx Afljpb Features: - 28 mm hole pattern / dimensions 3000 x 1500 x 200 mm - Plasma-nitrided version with scale - Incl. 6x base feet - Incl. 28-piece tool set 3: + 10x 280610.N clamp + 6x 280630.N clamp + 4x 280648.1.N prism + 24x 280510 pin + 4x 280740 magnetic pin + 8x 280410.N stop + 8x 280420.N stop + 6x 280110.N angle + 2x 280152.N angle + 2x 280162.N angle + 1x 280166+67.N angle + 1x 283999 accessory set

Stanje: pripravljen za uporabo (rabljen), Sertom brand hydraulic plate rolling machine, length 25,000 mm with loading feed, 2 lower rolls of 300 mm, upper roll of 318 mm, plate thickness capacity 14 mm. 22 kW for rotation, 5.5 kW for movements, 2.5 kW for support structure. Dimensions: 600x190x210(h) cm. Weight: 15,500 kg. Fpsdpfx Asnr Npyofleb

Stanje: novo, Leto izdelave: 2024, == Demonstration Machine == ALZMETALL Column Drilling Machine ALZSTAR 40 SV with coolant system B (Option 25) (consisting of separate tank (33 l), pump with motor protection switch, complete fittings) and LED machine lamp Standard equipment: Mushroom emergency stop, reversing switch (for right and left rotation), motor protection switch Stepless speed adjustment, digital speed display, feed overload protection, protection class IP54, plug connector spindle guard with electrical interlock Technical specifications: Drilling capacity steel E335 (St 60): 40 mm Thread cutting: Steel E335 (St 60): M 24 Cast iron EN-GJL-200 (GG20): M 30 Short taper: MK 3 Spindle stroke: 120 mm Reach: 293 mm Column diameter: 115 mm Machine table, usable area: 514 x 360 mm T-slots, number x width x spacing: 2 x 14 x 224 mm Foded Hy Elspfx Afljpb Distance spindle–table min./max.: 117/701 mm Feed: 0.10 + 0.20 mm/rev Machine height excl. options approx.: 1840 mm Net weight approx.: 285 kg Drive: stepless Motor: 1500 / 3000 rpm Power: 1.45 / 1.9 kW Spindle speed: 160–2250 rpm

Stanje: zelo dobro (rabljeno), Wir bieten zum Verkauf folgende Gránit-Mill 90 Holzpelletpressen an, im auf den Bildern ersichtlichen Zustand, nach Stilllegung der Pelletieranlage. Die Maschinen wurden in Ungarn hergestellt. Unser Unternehmen pflegt eine ausgezeichnete Beziehung zum Hersteller und kann Sie beim Kauf von Ersatzteilen unterstützen. Fsdpfx Ajp T Twujflspb Antrieb und Etikettenzuführung ähneln denen der älteren CPM-Maschinen. Die Pressen (bei Verarbeitung von Kiefernholz) erreichen eine Kapazität von 1,2–1,5 t/h/Stk. Preis: €29.900 pro Presse €49.900 für 2 Pressen Im Preis inbegriffen: Vorratstank Steuerschrank Dosierschnecke Dauermagnet Konditionierer Presse Motoren Vorratstank 1,1 kW Beschicker 1,5 kW Konditionierer 15 kW Stofftransporteur 0,55 kW Hauptmotor 90 kW 3 Matrizen Alle drei Matrizen von La Meccanica, kaum gebraucht; Bohrungsgröße 6 x 45 mm für Kiefer. 2 Sätze (insgesamt 4) gezahnte Kollerringe Ersatzteile Schrauben Muttern Schersicherung Montagehilfen Zustand: Motoren und Antriebe einwandfrei. Beide Maschinen getestet. Beim rechten Gerät wird der Austausch des Halslagers empfohlen. Kleinere Bauteile (wie der Pelletschneider) sind zu ersetzen. Kein Wasseranschluss, jedoch vorbereitet. Abschmierung erfolgt manuell, nachrüstbare Zentralschmierung möglich. Fazit: Die linke Maschine ist sofort einsatzbereit. Die rechte benötigt einen kleinen Service. Eine Besichtigung bzw. ein Probelauf ist nach vorheriger Absprache möglich. Die Anlagen stehen nicht im Produktionsbetrieb und müssen vorbereitet werden. Vor Ort kann die mechanische Standfestigkeit sowie die Schüttdichte der produzierten Pellets geprüft werden!

Stanje: novo, Leto izdelave: 2025, Dry rotary vane vacuum pump Available in stock. Fpsdpoftzkqofx Afljb Marpa Vacuum pump. Brand new unit. 12-month warranty Nominal flow rate: 80 m³/h at 50Hz. Ultimate vacuum: 150 mbar abs. For any questions, please contact us.

Stanje: dober (rabljeno), Leto izdelave: 1988, Description: Heavy duty high precision horizontal lathe with hydraulic clamping system Rohm, slide with two working positions, Sauter 4 side tool holder, circular turning unit, CNC 6 axes, tailstock, chip conveyor, suitable for both, high volume material removal and high precission turning. Machine modified with 2000 mm face clamping plate and increased in size. Year of production: 1988 Made in: Germany Turning diameter over bed: 2500 mm Turning diameter over telescopic covers 2200 mm Ibkanx9 Turning diameter over slide: 1400 mm Turning lenght: 6000 mm Clamping 3 chucks table 2000 mm Spindle bore: 200 mm Attachment for circular turning Weight of the workpiece 4.500-40.000 kg Revolver head: 4 pcs. Spindle r.p.m. range: 4 - 400 r.p.m. Main motor Siemens 95,5 kW Max torque 40000 Nm Overall power demand: 125 kW Control: CNC SIEMENS 8T, 6 controlled movements Machine weight: 43 000 kg Fpjdpfxexmb Ads Afleb Space required: 13.000x4.000

Stanje: dober (rabljeno), Razpon rezanja okroglega jekla pri 45°: 250 mm, Obseg rezanja okroglega jekla pri 90°: 280 mm, največja višina reza: 330 mm, Saw capacity: 280 mm round 330 mm square Saw capacity at 45º: 250 mm round 250 mm square Saw speed: 40/80 m/min Saw blade: 3,320 x 27 x 0.9 mm Miter angle: 0 - 60º Equipped with: - Coolant system Country of origin: Italy Fjdpfxott Nd Re Aflopb Motor power: 1.8 kW Machine weight: 700 kg Machine dimensions (LxWxH): 190 x 120 x 135 cm