CNC obdelovalni center

SHW UFZ 6L

Stanje: zelo dobro (rabljeno), Leto izdelave: 1991 Model: ITPS III Serijska številka: ITPS 80C 25 P1C226 Maksimalna sila stiskanja: 800 kN Delovni hod: 115 mm Napajanje: 415 V, 50 Hz, 3 faze Nazivni tok: 119 A Njdpfx Ajwq Dpqobbokt Vgrajena moč: 18,5 kW Teža stroja: 4940 kg Inventarna številka: 9.14 Krmiljenje: Delem DA-65R Stroj se zažene, vendar krmilje ne reagira na ukaze. Prejšnji uporabnik je originalno krmilje AMADA zamenjal z DELEM.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, Initial commissioning: 2000 Control: Heidenhain TNC 430 M Machine hours: 111,500 h X-axis: approx. 4,000 mm Y-axis: approx. 2,360 mm Z-axis: approx. 1,250 mm A-axis: ± 110° C-axis: ± 300° Clamping table Clamping surface: approx. 6,000 x 2,000 x 420 mm T-slot spacing: 18H12 / 250 mm Max. table load: 30,000 kg/m² 2-axis milling head AC3 Spindle power: 25 kW Spindle speed: max. 15,000 rpm Torque: 80 Nm Tool holder: HSK 63A Tool clamping: hydraulic !!! Spindle freshly overhauled at the end of 2024 !!! Drives linear axes Feed rate X-, Y-axis: up to 20 m/min Feed rate Z-axis: up to 20 m/min Axis acceleration X, Y, Z: up to 1.5 m/s² Connection data Connected load: 40 kW Main fuse: approx. 80 A Dimensions, weights Space requirement machine with peripherals: approx. 8,500 x 5,600 x 4,945 mm Total weight: approx. 18,000 kg Colour Enclosure, gantry, control cabinet: light grey Milling head and applications: green Nkodjw Rl S Sepfx Abbet Additional equipment - 3-sided enclosure, without extraction ducts - The illustrated additional clamping table is not included in the scope of delivery Condition of the machine Fully functional, in very good condition. The machine is still connected and immediately available.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1981, Funkcionalnost: popolnoma funkcionalen, Oprema: 1 desni vlek sani Nkjder D N Eqepfx Abbst 1 ekscentrična stiskalnica 250 kN 4 normalni agregat sani 1 ozek agregat sani Delovno območje: Debelina žice: do 6,0 mm Širina traku: do 80 mm Dolžina vleka: do 520 mm Zmogljivost: 10 - 250 kosov/min.

Stanje: novo, Cutting diameter round: 900 mm Cutting diameter square: 900 mm Cutting diameter flat: 900x900 mm Nkjdpfxjfg E Hps Abbot Saw band length: 9300 x 67 x 1.1 mm Table height: 790 mm Band speed: 14 - 60 m/min Total power requirement: 11 kW Machine weight approx.: 8.45 t Dimensions (L x W x H): 4,485 x 1.68 x 3.15 m The semi-automatic, hydraulic saws of the X-tech line offer top-tier sawing technology and maximum performance when cutting specialty steels. - The electro-welded machine frame and the steel saw frame meet all cutting requirements and eliminate vibrations and noise. - The chip conveyor is hydraulically driven and the speed is adjustable. - All machine motions (saw frame, vice, feed, saw band guides) are enabled by modern linear guides with high static and dynamic load capacity, guaranteeing very low sliding friction. - Another key feature is the material positioning rollers, which are powered by a hydraulic motor. These move at a right angle to the material, allowing for optimal clamping. - Thanks to the saw band position height control, the operator can position the band close to the material’s upper edge. After cutting, the band automatically returns to the previous position; alternatively, the 'remain' option in the lower position can be selected. During the cutting cycle, the software compares cutting force with preset values and can stop the sawing system in case of irregularities. - The saw band is cleaned by two adjustable steel brushes, which are hydraulically driven. - The hydraulic unit, including filter and manometer, ensures especially smooth operation at constant pressure. - Precision ground carbide inserts clamp the saw band, complete with lateral, hardened, and adjustable guide rollers. The adjustable band guide automatically moves as close as possible to the material. - The saw band is tensioned by a hydraulic cylinder, controlled by the machine software. Tension is automatically released after a preset time when the machine is idle or after a cycle is completed. - Automatic version with CNC control available for the X-TECH 900 / 1200 models with a feed length of 500 mm for high production series. - The material is supported by a table with seven rollers, powered by a hydraulic orbital motor, allowing precise material positioning even under maximum load. - All guided motions are facilitated by four ball circulation guides with high static and dynamic load capacities; significantly reduced feed friction. Hardened and ground prismatic guides. Price on request.

Stanje: rabljeno, Leto izdelave: 2007, največja širina rezanja: 1.060 mm, največja višina reza: 1.060 mm, Band saw Kasto HBA 10×12, year of manufacture 2007 Cutting capacities: - Round material: 1,060 mm - Square material: 1,060 x 1,060 mm - Flat material: 1,060 x 1,260 mm Clamping range: 300 – 1,260 mm Smallest dimension to be cut approx.: Ø 300 mm Shortest cutting length: 10 mm Minimum remnant length for single cut: 20 mm Minimum remnant length in automatic mode: 100 mm Table load capacity: max. 50 t Table travel: 6,100 mm Total drive power: 20 kW Saw motor: 11 kW Cutting speed, stepless at 50 and 60 Hz: 12 – 90 m/min Automatic single feed length: 2,100 mm Clamping force machine vice: 50,000 N Saw band dimensions: 11,430 x 80 x 1.6 mm Cutting feed: steplessly adjustable Material feed: hydraulic Material clamping: hydraulic Saw band guide: carbide, replaceable Nkedpfswk D Efsx Abbst Saw band tension: hydraulic Saw band cleaning: easily exchangeable brush, motor-driven This offer is exclusively for commercial customers within the meaning of Section 14 of the German Civil Code. No sale to private individuals.

Stanje: skoraj kot novo (rabljeno), premer struženja: 1.500 mm, MAXIMUM WORKING DIAMETER: 1600 mm. MAXIMUM WORKING LENGTH: 3000 mm. Nkodpfx Ajr Ui R Njbbet SPINDLE DIAMETER: 83 mm. OUR MACHINE IS FULLY OPERATIONAL AND PROBLEM-FREE. ALL SPEEDS AND AUTOMATIC FEEDS ARE IN VERY GOOD CONDITION.

Stanje: rabljeno, Leto izdelave: 1988, Funkcionalnost: nepreverjeno, Berstorff mixing mill 400 x 900 mm Nksdor A Dfyopfx Abbst For more details, see the attached description!

Stanje: dober (rabljeno), Leto izdelave: 1989, skupna višina: 6.450 mm, For sale: Beche short-stroke drop forge hammer KGH 4B. Machine weight: 65 t Working capacity: 40 kJ Njdpfx Absrt Uc Ejbokt Max. blow frequency: 98 rpm Max. usable blows per minute: 41 Max. ram stroke: 790 mm Machine is dismantled Technical specifications available on request

Stanje: novo, POPOLNOMA NOVO OBDELOVALNO SREDIŠČE Nkodpshy Artjfx Abbjt HEIDENHAIN TNC 7 digitalno tirno krmiljenje z 19" zaslonom HEIDENHAIN paket (motorji, merilni sistemi in ročno kolo) X-os: 650 mm Y-os: 700 mm Z-os: 645 mm Premer mize: 410 mm Maksimalni premer obdelovanca: 500 mm Maksimalna hitrost vretena: 12.000 min⁻¹ (oljno hlajeno z MMS) Vpenjalna glava vretena: SK 40-BIG PLUS (BVD 40) Maksimalna moč vretenskega motorja: 17 kW IKZ – notranja dovod hladilne tekočine – 20 bar Hitri pomiki X,Y & Z: 30.000 mm/min Natančnost pozicioniranja: ± 0,005 mm Ponavljivost: ± 0,003 mm Menjalec orodij z dvojno roko: 30-kratni (opcijsko do 80 orodij) Transporter ostružkov z verižnim trakom Popolno ohišje Odgovarjamo le na povpraševanja iz Nemčije / Le povpraševanja iz Nemčije bodo obravnavana

Stanje: zelo dobro (rabljeno), Control: D.Electron Z 32 Center height: 220 mm Center distance: 1000 mm Swing diameter over bed: 440 mm Swing diameter over cross slide: 245 mm Travel path - Z axis: 750 mm Bed width: 320 mm Spindle mount: CL 6“ Spindle bore: 62 mm Spindle speed: 0 – 2000 rpm Rapid traverse X/Z: 7 m/min Tailstock quill stroke (manual): 200 mm Tailstock quill diameter: 80 mm Nkjdpfxsd Sitke Abbot Tailstock taper: MK 4