Rezkalni stroj s pomično kolono

SHW Powerspeed PS5

Stanje: rabljeno, Leto izdelave: 2007, potovalna razdalja osi X: 8.000 mm, pomik osi Y: 2.100 mm, pomik po osi Z: 1.300 mm, največja hitrost vretena: 6.000 obr/min, hitrost vretena (min.): 36 obr/min, širina mize: 5.500 mm, dolžina mize: 2.600 mm, skupna višina: 4.900 mm, skupna širina: 16.200 mm, skupna dolžina: 9.000 mm, skupna masa: 55.100 kg, CNC talni rezkalni stroj za ležišče CNC-krmiljenje Heidenhain iTNC 530 Krmiljena NC-miza 1600 x 1600 mm Dimenzije mize 5500 x 2600 mm Pomik X-osi 8000 mm Pomik Y-osi 2100 mm Pomik Z-osi 1300 mm Pomik W-osi 1000 mm Zasuk rezkalne glave na osi C za 360° Zasuk rezkalne glave na osi A za 180° Hitrost vretena 36 - 6.000 min⁻¹ Glavni motor vretena 42 / 30 kW Orodni vpenjalni sistem DIN 69871-SK 50 Število orodij v orodnem magazinu 48 Za vsa vprašanja o stroju smo vam na voljo po telefonu ali e-pošti. Oglejte si tudi naše druge oglase za popoln pregled naše zaloge. Gedpfxeza Egne Afqjuc

Stanje: rabljeno, Leto izdelave: 1999, x-axis travel: 600 mm y-axis travel: 525 mm z-axis travel: 500 mm Table clamping surface: 1000 x 543 mm Spindle taper: SK 40 Spindle interface: DIN 69871 Spindle speeds - stepless: 20 - 12,000 rpm Feed rates X/Y/Z axis: 20 - 10,000 mm/min Rapid traverse X/Y/Z axis: 18 / 18 / 15 m/min Max. table load: 350 kg Control: HEIDENHAIN MillPlus Head swiveling: +/- 90° Total power requirement: 26 kVA Machine weight approx.: 4.2 t Godpfx Aotqqmhofqsuc Machine dimensions (L x W x H): 2.95 x 2.1 x 2.26 m Accessories: various tool holders, coolant system

Stanje: dober (rabljeno), Leto izdelave: 2011, Ref.-št.: 10615 Proizvajalec: DMG Tip: DMU 210 P Leto izdelave: 2011 Gusdpfey H Epwox Afqoc Tip krmiljenja: CNC-krmiljenje Krmiljenje: Heidenhain ITNC 530 Lokacija skladišča: Halberstadt Država izvora: Nemčija Št. stroja: 128/XXXX X-hod: 1800 mm Y-hod: 2100 mm Z-hod: 1250 mm Zasukalni razpon: -30 / +180 ° Obremenitev mize: 10000 kg Največji premer vrtljive mize: 1700 Ø Območje vrt. hitrosti mize: 12 min/-1 Vpenjalo orodja: HSK 63 Število mest za orodje v magazinu: 60 Vretenaste hitrosti – brezstopenjsko: 24.000 U/min Pribl. teža stroja: 41 t Vreteno: 24000 U/min Pogon za podajalno os A, C: 30 min/-1 Horizontalna glava: 130-1.380 mm Vertikalna glava: 230-1.480 mm Dodatne informacije: Stroj si je mogoče ogledati pod napetostjo.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2015, Na voljo je CNC vertikalni stroj za obdelavo dolgih postelj Mazak. Hodi X/Y/Z: 3000mm/800mm/720mm, B-os: 110°, C-os: 360°, premer mize: 600mm, dimenzije dolge postelje X/Y: 3500mm/820mm, največja obremenitev mize: 2500kg, vreteno: BT40, hitrost: 18000vrt/min, hitri pomik: 50m/min, orodni mesta: 48, tlak hlajenja: 70bar. Dimenzije stroja X/Y/Z: pribl. 5250mm/3650mm/3200mm, masa: pribl. 16100kg, krmiljenje: Mazatrol Matrix 2, delovne ure vretena: 18502h. Vključuje vrtljivo mizo Nikken CNC 601MA, visokotlačno hlajenje, sredinsko pregradno steno, merilno sondo Renishaw in RMP 60Q, CAD/CAM programsko opremo Topsolid 7.18 ter postprocesor. Dokumentacija je na voljo. Ogled na lokaciji je možen. Gusdox Ih Dmjpfx Afqec

Stanje: dober (rabljeno), Leto izdelave: 2017, Ref. No.: 10596 Manufacturer: HELLER Model: H - 2000 Year of manufacture: 2017 Control system: CNC control Control: Siemens 840 D Location: Halberstadt Country of origin: Germany Machine No.: 56XXX X travel: 630 mm Y travel: 630 mm Z travel: 630 mm B-axis: 0.001° Table load capacity: 500 kg Max. tool length: 350 mm Max. tool diameter: 160 mm Tool holder: HSK 63 Number of magazine tool stations: 80 Spindle speed: 16,000 rpm Tool changer: double gripper Max. workpiece height: 850 mm Max. torque: 95 Nm Rapid traverse X/Y/Z: 60 mm/min Rapid traverse X axis: 80 m/min Rapid traverse Y axis: 80 m/min Rapid traverse Z axis: 90 m/min Guodpfx Ajx Hn D Dsfqsc Spindle drive power: 40 kW Internal coolant through spindle: 50 bar Number of pallets: 2 Pallet size (LxW): 400 x 500 mm Spindle running hours: 1,000 h Operating hours: 3,000 h Max. workpiece swinging diameter: 720 mm Media interface: 5-fold Additional information: - Equipped with NC rotary table - Latest spindle technology - Ideal for high-precision machining tasks - Spindle hours: 1,000 - Pallet manually rotatable 4 x 90° - Hydraulic pressure: 200 bar - Fast drill breakage monitoring Machine can be inspected under power by appointment.

Stanje: dober (rabljeno), Please read the technical specifications in full. If the machine is of investment interest to you, we kindly request your complete identification, including a correct telephone number and email address, in order to receive an offer. DECKEL Milling Machine / Tool Milling Machine DMU 35 M 3 x 2 Axes CNC Milling Machine Equipped with SIEMENS 810 D – ShopMill Software Year of manufacture: 2001 and 2003 (2 units available) Travel paths X/Y/Z: 350 x 240 x 340 mm Infinitely variable spindle speed: 20 – 6,300 rpm Spindle taper: SK 40 DIN 69871 Drawbar: DIN 69872 Drive power: 6.3 / 10 kW (100/40% duty cycle) Torque: max. 55/80 Nm Universal tilting-/rotary table: 400 x 290 mm Table load: 100 kg Distance spindle nose/table: min./max. 145/485 mm Feed rate: 3,000 mm/min Rapid traverse: 5,000 mm/min Gsdpexz Rdasfx Afqjuc Input increment: 0.01 mm Rotation range: 360 degrees Swivel range: degrees Total power requirement: kVA Weight: approx. 1750 kg Technical data non-binding! Accessories/Equipment: - Direct position measuring system for 3 axes - Spindle drive via servomotor with toothed belt - 2 gearbox ranges - Full safety enclosure with sliding door - Swivelling control panel - Coolant nozzles on vertical head - Coolant system - Chip tray with coolant tank - Electronic handwheel - Machine feet - Machine lamp - Serial interface RS232C, LAN (RJ45) The machine is ideal for prototyping, toolmaking, training, mechanical workshops; gunsmiths, etc. It impresses with its versatility, thanks to the additionally manually operable rotary/tilting table which allows 5-sided machining. Condition: good to very good, from a vocational training center, see pictures. Can be tested under power.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, Grinding wheel width max. 15 mm Gedpfx Afevibc Hsqsuc Grinding wheel diameter max. 110 mm Module - max. 0.5 - 10 Pressure angle 15 - 25° Speed 2800 rpm Total power requirement 0.4 kW Machine weight approx. 0.02 t Space requirement approx. 0.4 x 0.2 x 0.2 m For profiling grinding worms for gear flank grinding machines. Suitable for finish and re-profiling on the following models: NZA, AZA, RZ 300 E, RZ 301 S, RZ 362 A, AM, ... Adjustable plate right with micrometer screw adjustment (axial) Adjustable plate left with micrometer screw adjustment (radial) 2 precision motor spindles for holding diamond wheels.

Stanje: novo, ZEATZ NC-rotacijske mize serije PHV – hitro dobavljive NC-rotacijske mize ZEATZ serije PHV zagotavljajo najvišjo natančnost, stabilnost in prilagodljivost v sodobni obdelovalni tehnologiji. Idealne za pozicioniranje, rotacijske in simultane obdelave v najrazličnejših aplikacijah. Vaše prednosti na prvi pogled: ✔ Integracija v obstoječe stroje (HEIDENHAIN / SIEMENS) ✔ Servis in tehnična podpora neposredno preko JMT ✔ Individualne izvedbe in rešitve po meri za stranke ✔ Visoka nosilnost za težke obdelovance Zakaj ZEATZ: ZEATZ pomeni inovativne rešitve NC-rotacijskih miz z najvišjo natančnostjo in zanesljivostjo. Po zaslugi robustne konstrukcije, pogonskih sistemov brez zračnosti ter najsodobnejše krmilne tehnike so te rotacijske mize idealne za najzahtevnejše obdelovalne postopke. Tehnične lastnosti: Delovni položaj: vertikalni / horizontalni Uporaba: natančno pozicioniranje, brezstopenjsko vrtenje in interpolirana obdelava v enem vpenjanju Velikosti: Premer čelne plošče: 500 / 600 / 800 / 1.000 / 1.200 mm (po želji tudi kvadratne vpenjalne plošče) Največja teža obdelovanca: Horizontalno: do 20.000 kg Vertikalno: do 4.000 kg Guodpem Tvz Dofx Afqjc Pozicionirna natančnost: ± 3" Integracija: Kompatibilno s krmiljenjem HEIDENHAIN in SIEMENS Vaše prednosti kot JMT-kupec: ✔ Uradni prodajni partner za ZEATZ v Nemčiji ✔ Tehnična podpora in servis na lokaciji ✔ Hitro zagotavljanje rezervnih delov ✔ Podpora pri integraciji in zagonu ✔ Številni referenčni projekti v Nemčiji na voljo

Stanje: rabljeno, Leto izdelave: 2001, Press force 0.2–40 t Max. workpiece diameter: 70 mm Thread length: 120 mm Control system: Total power requirement: 29 kW Machine weight: approx. 9.5 t Space requirement: approx. m Offer We are pleased to offer you, subject to prior sale and errors in technical specifications, from our stock: PROFIROLL – BAD DÜBEN (Germany) CNC Thread, Gear, and Profile Rolling Machine Model: ROLLEX Year: 2001 Rolling force, steplessly adjustable: 0.2–40 tons Rolling spindle diameter: 120 mm Max. workpiece diameter (approx.): 70 mm Each spindle drive: approx. 8.5 kW Total connected load: approx. 29 kW – 400 V – 50 Hz Weight: approx. 9,500 kg Accessories / Special Features: • The machine is equipped with a modern CNC control system developed by the manufacturer. All relevant process and workpiece parameters can be entered, allowing quick and easy changeover for different workpiece sizes (changeover time). All process parameters are graphically displayed on the monitor, providing the user with an optimized process cycle. • Integrated (workpiece) center rolling device for shaft-shaped workpieces (such as gear shafts) with center holes, including a clamping device and prismatic positioning fixtures for pre-aligning the workpiece before clamping, as well as a motorized (driven) tailstock center on the front side of the workpiece. The workpiece slide stroke is approx. 500 mm—thus, the workpiece is clamped and hydraulically moved between the two rolling tools. • Hydraulic oil chiller, separate electrical cabinet, CNC control panel, etc. • Transparent safety enclosures in the working area. Centralized lubrication. Guodpfst Hw N Tex Afqjc

Stanje: rabljeno, Leto izdelave: 1987, Technical details: Number of spindles: 8 Spindle bore: 51 mm Item: Multi-spindle automatic lathe Make: Schütte Model: AF51 Year of manufacture: 1987 Six-spindle automatic lathe 8 main spindles Max. nominal bore D=51mm Control system: SIEMENS SIMATIC S5 Gripper in position 7 for rear-side machining Thread cutting drive Independent feed in position 2/3 Electronic cam switchgear Balluff Plain text display Wöhrle Coolant booster pump Magnetic cartridge filter Gujdpfsiay Sfex Afqoc Oil operation Including bar feeder IEMCA PRA40/37/F, year of manufacture 1987 (bundle loader) Painted in light blue and light grey Tool configuration may differ from illustrations. Please contact us for more information and pictures via mail(at) or