Centralno mazanje

Showa MLA-03W

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, skupna masa: 1.195 kg, volumenski pretok: 7,25 m³/h, obratovalni tlak: 13 letvica, vhodna napetost: 400 V, ATLAS COPCO GA 37 VSD ff rotary screw compressor Variable speed drive (inverter controlled) Equipped with a refrigerated air dryer Motor: 37 kW Capacity: 7.25 m³/min Pressure: 13 bar Operating hours: 13,200 h Gjdet Hdh Nspfx Ab Toca The compressor is fully operational

Stanje: rabljeno, številka stroja/vozila: 11481, Rotor diameter: 300 mm Rotor width: 600 mm 3-knife rotor Godpfx Abeghgmzs Teca 4 rows of stator knives Feed opening approx. 250 x 600 mm Drive motor 37 kW

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Kaeser screw compressors – various models Gcjdpoqcu Rcsfx Ab Tea

Stanje: novo, Leto izdelave: 2025, Crosscut and Mitre Saw Type: ZS 200 N - 5 kW Motor with machine stand, Tiltable via handwheel and worm gear (rear) Saw blade diameter: 520 mm, blade arbor hole: 50 mm Saw blade speed: 2,800 rpm 400 V / 5 kW (S6/40%) motor with brake and automatic star-delta starter Cutting width at 90°: 420 mm Cutting width at 45° (swiveled): 295 mm Cutting height at 90°: 200 mm Cutting height at 45° (tilted): 140 mm Gcodpfx Abek H Ic Uo Tsa The saw can be swiveled to approx. 25° for acute angles on one side, and tilted flat to the left up to 30°. TCT circular saw blade 520 x 4.0/2.8 x 50 mm 60 WZ, negative rake, for wood RLH-ST60 measuring stop and roller conveyor, 6.0 m measuring length, mounting side: left Heavy-duty design, length stop carriage adjustable from operator side via handwheel, electronic digital display, stop carriage pneumatically clamping, flip-away stop flap towards the rear, with steel rollers, 60 mm diameter, roller spacing 200 mm, roller width 400 mm, with 4 support feet and adapter piece, total length: 6.7 m Surcharge for digital electronic display unit type: FIAMA EP6 for 230 V mains operation, with electric on/off switch and socket. Bright dark red LED display. Higher accuracy than the battery-powered crystal display. RO-ST60 infeed roller conveyor, 4.0 m long, mounting side: right Heavy-duty design, steel rollers 60 mm diameter, roller spacing 200 mm, roller width 400 mm, with 3 support feet and adapter piece Location: Ex stock, 54634 Bitburg - Immediately available - Image: similar. Machine is still in original packaging.

Stanje: novo, Leto izdelave: 2025, Cutting height at 90°: 170 mm Cutting length: 430 mm Mitre range horizontal: 45°-90°-25° Mitre range vertical: 60° - 90° - 30° Swivel adjustment with hand crank: yes Gcsdpfx Ajizkhvsb Toa Roller conveyor / support table: yes Saw blade diameter: 420 mm Speed: 2800 rpm Motor power: 3 kW Motor brake: yes Extraction port: 100 mm Roller conveyor length: 2 x 1500 mm Machine length: 4000 mm Machine width: 1250 mm Machine height: 1550 mm Weight:

Stanje: rabljeno, Leto izdelave: 1992, Clamping force 600 kN Clamping plate 460x460 mm Distance between columns 300x300 mm Machine weight approx. 4.5 t Clamping stroke 230 mm Ejector force 40 kN Ejector stroke 70 mm Mold height 120-350 mm Column diameter 56 mm Casting force 55 kN Casting stroke 130 mm Casting plunger diameter 45, 50, 55 mm Casting volume (DIN 24480) 76, 121, 165 cm² Specific casting pressure 345, 280, 231 kp/cm² Associated parting surface 174, 214, 260 cm² Withdrawal stroke 150 mm Used die casting machine DAW 50 with SBC2 control unit for use with zinc alloys. Available from used machinery stock. The machine is equipped with an electric furnace by Rauch MO50E and a used pneumatic spraying device 401 by Oskar Frech. Manufacturer's recommendation is an overhaul at the refurbishing facility. Gsdpefrvzvsfx Ab Tsca The scope of the overhaul can be agreed upon.

Leto izdelave: 1988, Stanje: rabljeno, Load capacity in kg: 6,000 kg Godpfjrxxbtjx Ab Toca Fork length: 1,900 mm Tire condition: 89% Serial number: GEF 2240 Lift height: 3,300 mm Machine weight: approx. 9,650 kg

Stanje: rabljeno, Leto izdelave: 1997, Prehodna širina 1200 mm Prehodna višina 1200 mm Globina komore 1200 mm Obratovalni tlak 6,0 bar Obratovalna napetost 380 V Teža stroja cca 1,4 t Potrebni prostor cca 1,40 x 1,70 x 2,70 m - Tovarniška št.: 340997-466 - Tlačna peskalna naprava (ni injektorska peskalna kabina!) Gjdpfx Abjvlzzuj Tsca - Okrogla miza / vrtljiva plošča, izvlečna - Nožno stikalo - Odsesavanje - Stopnice

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2024/121/47, premer žaginega lista: 420 mm, GRAULE crosscut and mitre circular saw Type ZS 170 N (tiltable) 400 Volt three-phase brake motor 2.2 kW Saw blade diameter: 420 mm Blade bore: 40 mm Gcjdstwz Tlspfx Ab Tja Cutting height: 170 mm Blade tilted at 45°: cutting height 115 mm, cutting length 410 mm Including the following accessories: 1 pc. machine tiltable from behind on both sides by hand crank: from 90° to the left up to 45° and to the right up to approx. 30°, up to approx. 60° 1 pc. TCT (carbide-tipped) circular saw blade 420x3.4/2.4x30 mm, 48 teeth, negative hook angle for wood 1 pc. machine stand

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2006, Technical Data Brand: KENT Model: VK 1600MC Year: 2006 Serial No.: 2200139 CNC: FANUC 18 iMD Gsdsqwyzfjpfx Ab Teca Location: Tabaza (Asturias) Table Dimensions Table Surface: 1700 x 810 mm T-slots: 22 x 5 x 160 mm Maximum Table Load: 2,000 kg Travel Longitudinal Travel X: 1600 mm Transversal Travel Y: 815 mm Vertical Travel Z: 815 mm Spindle nose to table distance: 220 ~ 1035 mm Spindle nose to column distance: 865 mm Spindle Taper: BT50 Spindle speed: 30 – 6,000 rpm ZF gearbox (2 ranges): Yes Max. Tool Weight: 15 kg Max. Tool Size (Diameter x Length): 125 x 300 mm ATC Max. Tool Size: Ø125 x L250 mm Max. Tool Weight: 15 kg Number of Tools: 32 Feed Rates Working Feed Rate: 1 – 10,000 mm/min Rapid Traverse (X / Y / Z): 18/18/18 m/min Motor Spindle Motor (Max. Power 30 min): 15/18.5 kW Axis Drives X, Y, Z: 5.5 / 5.5 / 5.5 kW Coolant Pump CTS: One air & two coolants – 4 bar + 6 bar / 20 bar Weight and Dimensions Machine Weight: 16,150 kg Machine Dimensions: 4,488 x 3,448 x 3,250 mm Footprint: 5,000 x 3,500 mm