Robot ravnanje naprava

SEPRO SR ACCESS 22 S3 DB

Leto izdelave: 1981, stanje: rabljeno, Pressure: 40 t Column clearance: 600 mm Stroke: 160 mm Table size: 560 x 400 mm Installation height: 360 mm Ram bore: 40 H7 DIN 810 mm Oil capacity: 500 l Return speed: 200 mm/sec Draw cushion hydraulic pressure/stroke: 60 Ejector force: 25 t Total power requirement: 15 kW Space requirement approx.: 1.44 x 0.95 x 2.54 m Pressing speed: 27 mm/sec Return speed: 200 mm/min Lrodpfx Abeb U Hw Te Toi With hydraulic draw cushion, speeds: Rapid approach speed steplessly adjustable up to 240 mm/s

Stanje: novo, *TECHNICAL SPECIFICATION: Heating capacity, hot circuit: 48 kW Heating capacity, cold circuit: 12 kW Cooling capacity, hot circuit: 42 kW Cooling capacity, cold circuit: 270 kW Medium: Water up to 200°C Maximum external volume: 10 liters at 200°C Max. flow rate: up to 200 l/min Max. delivery pressure: up to 6.5 bar Motor power: 5.5 kW Dimensions (LxWxH): 1,395 x 753 x 1,180 mm Weight: approx. 580 kg *EQUIPMENT HIGHLIGHTS: - Control and operation via PLC with touch screen - Heating with stainless steel tubular heaters made of Incolloy - Heater control via solid-state relays - Control cabinet IP54, externally ventilated - Electrical wiring on terminal blocks - Volt-free input for signal to switch between heating/cooling (front door) - Volt-free contact for collective alarm via 3-pin connector (front door) - Temperature control unit with heating and cooling circuits, for connection to a valve station for rapid switching between hot and cold circuits - Temperature-controlled feed of return water - Level monitoring with automatic level compensation - Dirt filters in cooling water inlet and in return line of the circulation system Lrsdpfx Absg Ey Ufo Tsi - Separate automatic filling with strainer - Flow measurement using differential pressure principle in both circuits - Monitoring of heating element surface by temperature sensor - System pressure regulation, required compressed air connection: 6 to 8 bar - Pressure boosting pump type DS 360 for make-up water - Corrosion-resistant components (stainless steel, brass) - Unit mounted on castors and ready for connection *OPTIONS: - EcoTemp system for intermittent operation - Connection for external temperature sensor PT100 or type J/K - Remote touch screen with 15 m cable Visit our website for more details or for alternative performance classes. *This unit is compliant with European directives. Other directives and standards are only fulfilled if specified in the order confirmation. This technical specification reflects the standard configuration; customer-specific deviations from the standard are listed in quotations or order confirmations.

Leto izdelave: 2012, stanje: dober (rabljeno), Robot 40 RC 200 X = 700 mm Y = tandem 1600 mm Z = 3320 mm B + C Servo Year of manufacture: 2012 Price: €8,900 Ljdpfx Abjgkvtxe Tjri Contact: Mr. Rainer Eckerle

Stanje: dober (rabljeno), Leto izdelave: 2010, Clamping force: 200 t Screw diameter: 35 mm Shot weight: 141 g Tie bar spacing (vertical): 570 mm Tie bar spacing (horizontal): 570 mm Shot volume: 154 cm³ Type: Horizontal Drive: Hybrid Lodpfowpkfcox Ab Tori

Stanje: nepreverjeno (rabljeno),

Stanje: dober (rabljeno), Leto izdelave: 1999, Ravnanje naprava Sepro 3021 BZ S 900 II x=550 mm y vert. =1000mm Z=2250 mm +C +A(R1, R2) Leto izdelave: 1999 Lodpfx Abod H S U Do Tori Cena: 1.450 evrov Kontaktna oseba: gospod Rainer Eckerle

Leto izdelave: 1988, stanje: dober (rabljeno), Pressing force: 160 tons Side openings: 600 mm Installation height: 750 mm Table size: 1400 x 900 mm Ram size: 1400 x 900 mm Speeds: Rapid down: from 400 mm/sec Rapid up: 300 mm/sec Working: 19 - 50 mm/sec Stroke: 400 mm Ledpfx Abod Rlm Re Teri Power requirement: 45 kW Weight: 23 tons Height: 4300 mm Press is floor-mounted Press control: Siemens S5 3 cushion cylinders integrated in the table, insertable

Stanje: novo, *TECHNICAL SPECIFICATIONS: Heating capacity: up to 54 kW Cooling capacity: up to 300 kW Medium: Water up to 200°C Maximum external volume: 43 l at 200°C Max. flow rate: up to 230 l/min Max. delivery pressure: up to 8.3 bar Motor power: up to 3 kW Dimensions (LxWxH): 1,460 x 525 x 1,200 mm Weight: approx. 330 kg Heat transfer medium connection: Flange DN40 (DIN EN 1092-1), Form B1 *FEATURE HIGHLIGHTS: - Smart controller (7" touch display) for regulation and control - Heating control via solid-state relays - Control cabinet IP54, externally ventilated - Expansion vessel, heater, and piping made of stainless steel - Heating via stainless steel tubular heater made of Incolloy - Dirt trap (circulation) - Unit ready for connection and mounted on castors, 2 of which are steerable and equipped with brakes - Cooling and filling controlled via solenoid valve - Configurable automatic filling via potable water supply or separate connection (factory setting: via cooling water supply) - Flow measurement by differential pressure principle - Level monitoring via magnetic float switch - Automatic temperature-dependent system shut-off (except for WP7-90) - Flow monitoring by flow detection - Bypass between flow and return with reduced cross-section - Dirt filters in cooling water supply, filling, and return line of the circulation system - Continuous bypass of heat exchanger via 3-way motorized control valve (WP7-180/200) - System pressure monitoring using pressure transmitter in the expansion vessel (WP7-150/180/200) - Booster pump for system filling (WP7-180/200, optional for others) - Safety temperature limiter (STL) in heater and supply line (WP7-200) - Manometer in supply line at rear side of the unit - Circulation circuit thermally insulated (WP7-150/180/200) Visit our website for more details or for other performance classes. Lredeg Ey T Eopfx Ab Tei *This device is compliant with European Directives. Other directives and standards are only fulfilled if stated in the order confirmation. This technical specification reflects the standard configuration; customer requirements deviating from the standard are specified in quotations or order confirmations.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Inv.119140, skupna dolžina: 26.000 mm, skupna širina: 9.000 mm, Oprema: kabina, osvetlitev, 1 used painting line, featuring a circulating conveyor system, manual paint booth for sample work, automatic paint booth equipped with a robot and workpiece rotary holder, reverse osmosis unit for deionized water, paint preparation, and exhaust air treatment. Ledpowqg Iiofx Ab Teri The system is currently in operation on a two-shift basis for serial production. Manual loading and unloading onto a conveyor belt; the remainder of the process is fully automated. Change as of 18.7.25: Dismantling to be carried out by the buyer at the Lohr facility starting September 2025. All costs for dismantling, as well as for packaging, collection, and transport to the buyer’s site (FCA), are to be borne by the buyer. The area must be completely cleared for installation of new production machinery by mid-January 2026 at the latest. For further details, please refer to the attached handout/flyer. Due to the high complexity of dismantling, early and careful planning with the responsible dismantling contractor is mandatory. Timely contact and/or site visit at the factory is also recommended. Further information can be found in the attached handout. --- Information in English, French, or Spanish available upon request. --- Please state your offer price. Sale only within the EU, Switzerland, Turkey, and the United Kingdom. Dismantling is to be organized by the buyer. --- Sold without packaging; any and all warranty claims are excluded. If you intend to carry out dismantling yourself, please indicate this in your offer. We do not guarantee the accuracy of the technical data, the completeness of accessories and tooling, or compliance with all safety and environmental protection requirements as stipulated by applicable accident prevention regulations.

Leto izdelave: 2013, stanje: dober (rabljeno), Robot Engel Viper 20 RC 200 Lredpfx Abjhqmpxs Tsi Axis travel: X = 700 mm, Y (tandem) = 1500 mm, Z = 2840 mm, B + C axes servo-driven Year of manufacture: 2013 Price: €7,500 Contact: Mr. Rainer Eckerle