Sušilniki lesa in ISPM-15

SELTAR

Stanje: novo, Leto izdelave: 2026, Oprema: CE označba, dokumentacija / priročnik, Komora za obdelavo NIMF-15, vgrajena v 40-ft pomorski kontejner. Kapaciteta: 300 evropalet. Dobavljena popolnoma zaključena – priključite električno napajanje in je pripravljena za uporabo. Zelo hiter in ekonomičen model za toplotno obdelavo. Program homologiran v vseh državah, z možnostjo 3, 4 ali 5 sond. Garancija 1 leto. Itedpjy Hhh Njfx Abxsh

Leto izdelave: 1999, stanje: pripravljen za uporabo (rabljen), Delovna širina: 230 mm, delovna višina: 160 mm, število vreten: 5, premer vretena: 50 mm, moč vretena: 4x 5,5kW/2x 11kW, pomik: 24 m/min, dolžina vhodne mize: 3000 mm, aksialni hod vertikalnega vretena: 80 mm, aksialni hod horizontalnega vretena: 45 mm. Priključna moč: 126 kW, potreba po zraku: 8400-9600 m³/h, dimenzije stroja (X/Y/Z): pribl. 3500mm/2000mm/1800mm, teža: pribl. 3500 kg. Vključno z vgradno enoto Weinig EM-11 in ustreznim razdelilnikom za odsesavanje. Dokumentacija na voljo. Možen je ogled na lokaciji. Ijdpfxeu Damdj Abxsth

Leto izdelave: 2025, stanje: novo, NIMF-15 treatment chamber integrated in a 20-foot shipping container. Capacity for 144 Euro pallets or approximately 10 m³ of timber. Delivered fully assembled—just connect power and start operating. Very fast and economical model for performing heat treatment. Itedpfx Ajhw Nryobxoh Certified program in all countries, available with 3, 4, or 5 probes. 1-year warranty.

Stanje: dober (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, Cambio 500 debarking system consisting of: Infeed centering device. Iodjwxdimspfx Abxjth Cambio 500: Rotor opening 495 mm. Minimum log diameter 90 mm. Drive motor 55 kW. Feed motor 11 kW. Feed speed 80 m/min. Hydraulic rotor and feed rollers. Outfeed control unit. Tilting bin for long timber. Spare parts.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1995, Funkcionalnost: popolnoma funkcionalen, Log feed, chain log infeed and chain log conveyor line – 20 m Minimum log length: 5 m Maximum log length: 14 m Holtec ES 120 – crosscut saw (year of manufacture: 1995) For cross-cutting and trimming timber in industrial applications Chain log conveyor line – 4 m Cassel Metal Shark® Octa – metal detector Ijdpfx Abjwlaxkoxjth Discharge roller conveyor + transfer table – 7 m Control cabin Hydraulic operation Condition: excellent Manufacturer: Holtec Type: ES120 Year of manufacture: 1995

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: trifazni, trajanje garancije: 12 meseci, skupna masa: 5.000 kg, vhodni tok: 44 A, širina mize: 1.200 mm, dolžina mize: 2.700 mm, Zbijalnik je namenjen zbivanju spodnjih in zgornjih delov palet. Po enem ciklu je zbita ena paleta. Zbijanje poteka mehansko. Stroj samodejno jemlje žeblje iz zalogovnikov, kjer so nasuti ohlapno. Sestavne dele palet iz zunanjih zalogovnikov pobirata dve osebi. Zbijalnik XP 1000 je namenjen izdelavi industrijskih palet v razponu dimenzij od 800-1200/1200-2600 mm. Cikel zbivanja je nastavljiv s krmilne plošče, traja pa najmanj 10 sekund. Plošče s kladivci so nastavljive po celotnem območju kladiva. Iedet Tyn Sjpfx Abxsth Standardna oprema zbijalnika vključuje 16 kladivc na osmih ploščah in en komplet kalupov za palete 800/1200 mm. Dodatni kalupi so na voljo na zahtevo za doplačilo. Učinkovitost stroja je odvisna od zaposlenih in njihove hitrosti pri razporejanju sestavnih delov.

Stanje: rabljeno, Število vreten: 5 kosov Delovna širina: 230 mm Višina skobljanja: 120 mm Avtomatski štiristranski skobeljni in profilirni stroj Weinig Profimat 23 E za štiristransko skobljanje in profiliranje lesa z mobilnim vretenom. Itsdpjx Ecguofx Abxoh Vreteno 1: Spodaj / 5,5 kW / 40 mm Vreteno 2: Desno / 5,5 kW / 40 mm Vreteno 3: Levo / skupen motor z #2 / 40 mm Vreteno 4: Zgoraj / 7,5 kW / 40 mm Vreteno 5: Spodaj / 4 kW / 40 mm

Stanje: zelo dobro (rabljeno), WEINIG Hydromat H23 Line, S/N 87321, year 1999, Ref-No. 103437 WEINIG transverse conveyor HighMech E-1, with 6 flat chains approx. 2000 x 3500 mm Hydraulic WEINIG accelerator model 814 Short infeed table with heavy-duty 4-roller feed Planing moulder with reinforced KASCHWIG three-sided soundproof cabin • Maximum working width: 230 mm • Maximum working height: 160 mm • Electronic feed, frequency-controlled, 8 – 80 m/min • Feed motor: 18.5 kW • 1st spindle bottom: 11.0 kW • 2nd spindle right: 11.0 kW • 3rd spindle left: 11.0 kW • 4th spindle right: 11.0 kW • 5th spindle left: 11.0 kW • 6th spindle top: 15.0 kW • 7th spindle bottom: 11.0 kW • 8th spindle top: 15.0 kW • 9th spindle bottom: 15.0 kW • 10th spindle universal: 11.0 kW (4-sided) • Spindle speed: 6,000 rpm • Spindle diameter: ø 50 mm • All spindle motors equipped with NEW motor start/stop combination • Pneumatically assisted top pressure rollers • Feed rollers D=140 mm • 6 driven rollers in the table • Spindles 1 + 6 + 7 + 8 + 9 with counter bearings • Spindles 8 + 9 with straight jointer • Spindles 8 + 9 with profile jointer • Spindles 6 + 8 with pneumatic pressure • Reduced feed roller spacing Itsdpewvqklefx Abxsh • Hard-chromed table plates • Hard-chromed fences • Pneumatically assisted lateral pressure rollers • Automatic table lubrication • Centralized lubrication points • Free-standing control panel • Total connected load approx. 145 kW / approx. 400 A • Free-standing switch cabinet • Operating manual, spare parts list, and circuit diagram included • Machine without planing heads Machine dimensions approx.: • Length: 6,000 mm • Width: 2,250 mm • Height: 1,800 mm • Weight: approx. 8,500 KG Factory-new WEINIG parts used: NEW horizontal / vertical spindle NEW counter bearings All spindles with HL bearings All motors newly mounted NEW electronic motor soft start / braking units NEW hard-chromed table plates NEW hard-chromed fences Many other NEW PARTS installed in the machine Condition: see attached photos – technically in top condition Infeed mechanization unrefurbished – all parts present – operational Payment: Prior to loading, net cash Delivery time: By arrangement Delivery: EXW Inspection: Anytime by appointment Subject to prior sale and errors excepted.

Stanje: zelo dobro (rabljeno), Self-loading press for laminated boards Orma LS/ECO/CA 30/13 Working length: 3000 mm Working width: 1300 mm Ijdpfx Abev Nhx Uoxeth Automatic material loading Glue application system Shelves heated with oil up to 130°C Upper pressing force: 57 t Side pressing force: 9 t Year of manufacture: 2001 CE certificate

Stanje: rabljeno, Leto izdelave: 1993, Technical Details: Iodsu Nu Hispfx Abxoth Form plates - Length / Width: 500 x 400 mm Heating: Two-stage heating, 4.6 and 6.0 kW Control: PLC Operating voltage: 380 V (3x 20A) / 24 V DC Adjustable working height: 870 - 970 mm Total power requirement: 6 + 2.5 kW Machine dimensions approx. LxWxH: 2.8 x 1.1 x 1.3 m Weight: 570 kg Compact angular welding machine with shrink tunnel PACKAGING MACHINE WITH SHRINK TUNNEL, COOLING STATION, AND SPECIAL COOLING FAN Mobile / on rollers Operation possible in fully automatic or manual mode. Areas of application / Products: - Various brochures, plans or other items made of paper/cardboard in DIN A5 / DIN A6 Usable films: All half-tube shrink films up to 0.060 mm Sealing system = impulse sealing, with Teflon-coated seam, adjustable Automatic product transport into the shrink tunnel Additional information: - Tunnel passage width: 450 mm - Tunnel passage height adjustable to 100, 200, 300, and 400 mm - Length of the heated tunnel hood: 900 mm - Production capacity of the machine depends on product and film: 5 to 20 cycles/minute (manufacturer’s data) - Max. film width (folded half-tube): 550 / 550 mm at 25 - 50 μm - Frame dimensions: 500 x 500 x 290 mm = max. packaging size Heating: - Two-stage heating: 4.6 and 6.0 kW - Fan infinitely variable Cooling station: - Outlet: 300 mm - With fan Conveyor belt: - Feed: 2.5 - 12 m/min - Infinitely adjustable std.