Mostni izsekavalni stroj

schoen + sandt 5300 A

Leto izdelave: 2017, Stanje: kot nova (razstavni stroj), › ideal for all shirt fabrics (FX 1000) 1000mm belt › seperate feeding and transport belts, "cool feeding" › special insulation, little heat radiation › upper and lower heating individually controlled, with temperature limiters (1000 mm - 39 .37 inch long) Gbsdopfa Nhopfx Afqjg › seperate heating zones selectable, TOP (shirt), BOTTOM (outerwear) › special speed-heat up function, for fast heating of the machine › touch screen for program storage and service functions › optional air and compression cooling › failure diagnostic system

Stanje: kot nova (razstavni stroj), Leto izdelave: 2020, Hydraulic 400-ton column press suitable for continuous shift operation, with the following basic specifications: a) Closing speed: 100 - 450 mm/sec b) Opening speed: 50 - 250 mm/sec (adjustable via touchscreen) c) Pressing speed: 5 - 60 mm/sec (adjustable via touchscreen) d) Accumulator with approx. 4 nitrogen bottles e) Table size (clamping area): 2700 x 1700 mm (front view, between the columns) f) Total table size: 3400 x 1700 mm g) 28 mm T-slots as per customer specification h) Table, ram, and press head are stress-relieved annealed i) Column diameter: 250 mm j) Ram size: 3400 x 1700 mm (clamping area 2700 x 1700 mm) k) Overall machine dimensions approx. 3900 x 2200 mm (floor area) x 5700 mm height l) Oil temperature monitoring (adjustable via touchscreen) m) Automatic lubrication (adjustable via touchscreen) n) Free positioning of the ram (adjustable via touchscreen) o) KEYENCE light curtains 14 mm on front and rear sides p) Recirculating oil cooling (adjustable via touchscreen) q) Pressure holding valve 0 to 600 sec. (adjustable via touchscreen) r) Table plate size 3400 x 1700 mm, precision-milled Godjg Iihwepfx Afqjbg s) Side-monitored doors, 1200 mm high, 1000 mm wide t) RITTAL control cabinet, 2200 mm wide, up to 20 m away from the press u) Pressure adjustment from 50 to to 400 to (adjustable via touchscreen) v) Stroke limitation selectable by pressure or position w) Programming mode, setup mode, single stroke + continuous stroke (selectable via rotary switch) x) Swiveling operator panel with 15-inch touchscreen monitor y) Two-hand operation on both sides z) Prepared for automatic material feed (SIEMENS S7 1500) aa) Machine body primed and painted bb) Installation, commissioning, and training available at extra cost The hydraulics of the presses we offer are completely assembled using components from BOSCH-REXROTH/Parker/HAWE. Only components (SIEMENS) that are readily available in Germany are used in the control cabinet. All safety equipment, except the light curtains, is supplied by SICK. The control system is supplied by SIEMENS (S7 1500) including the 15-inch touchscreen monitor. The SIEMENS remote maintenance unit SECOME-Ethernet is included in the scope of delivery. SPECIAL FEATURE: Our design, featuring two press cylinders and the accumulator, allows full performance with a main motor of just 90 kW. Please refer to section 1.3 for technical details. Technical Data Design Type of press: Column press Thermally neutral: 80 – 120°C Number of operator sides: 2 Forces Press force max.: 4,000 kN Free opening force max.: 600 kN Pressure build-up time (closed tool, steel on steel): max. 2 sec. Dimensions – intended minimum tool height: 600 mm Max. opening width: 1600 mm Stroke and min. opening: 1000/600 mm Table height above floor: 820 mm Height above floor (overall height): approx. 5700 mm Hall height min.: 7000 mm Parallelism deviation at 20°C: +/- 0.1 mm Deflection (at max. closing force with 70% occupancy): ≤ 0.17 mm/m Weight Total weight of the press without operating materials: approx. 52 tons Speeds (see attached cycle diagram) Rapid closing: 100 - 450 mm/s Pressing speed at F max.:

Stanje: novo, Leto izdelave: 2019, številka stroja/vozila: DF0309, Pressure: 200 t Table length: 2500 mm Table width: 2000 mm Max. stroke: 2050 mm Dimensions L x W x H: approx. 9200 x 4700 x 5800 mm Retracting force: 25 t Machine weight approx. (without operating materials): 50 t Column diameter: 210 mm Table swiveling speed: 25 mm/sec Table extension: 2000 mm Movable table speed: 30 mm/sec Max. table load: 15 t Drive power: 20 kW Adjustable working speed: 1 - 10 mm/sec Approach speed: 10 mm/sec Return speed: 25 mm/sec Rapid traverse speed: 10 mm/sec Oil tank: 400 l Oil cooling (electric): 1.5 kW (max) Platform height: 650 mm Table height: 800 mm Ram height: 850 mm Control system Siemens: S7 1200 Monitor: WEG 12 inch Hydraulics and tank on top of the press: 10,200 ? Surrounding maintenance balcony: 5,000 ? Ejector in table (capacity 30 tons, stroke 250 mm): 4,000 ? Two controlled hydraulic inlets and outlets: 1,000 ? Rotatable (up to 180°), electrically driven table: 18,000 ? Safety guard around work area: 1,500 ? Table plate tiltable by 75°: 12,000 ? Upper tool foldable: 170 degrees Swivel table: 75 degrees Table tiltable: 75 degrees Ejector with 60T in the ram center: 12,000 ? Ram plate foldable by 180 degrees: 14,000 ? Functioning of the spotting press: Control operation modes: The control features "Manual" and "Semi-automatic" mode. In manual mode (joystick operation): - The table can be hydraulically extended and retracted at max. 30 mm/sec - The table can be hydraulically tilted up to the set angle at max. 25 mm/sec - The ram plate can be hydraulically lowered and folded by 90° and extended up to 180° - Pressureless movement is possible - Pressure can be set via the monitor - The speed can be adjusted between 1 and 10 mm/sec - An additional hydraulic cylinder (core pull, etc.), located on the tool, can be controlled In semi-automatic mode: - The ram can perform rapid traverse up to 10 mm/sec - A pre-programmed cycle (input via monitor) can be executed. Example: - 30 t pressure - Upper limit 300 mm - Lower max. limit 900 mm - Speed change point 850 mm - Rapid traverse at 10 mm/sec - Pressing speed from 850 mm only 10 mm/sec - Dwell time at set pressure or BDC 1 second - Return to upper stop Joystick function: The lever can be pulled (downward motion) or pushed (upward motion). The more it is pulled or pushed, the faster the machine moves. 1 to 10 mm/sec for downward travel and 1 to 25 mm/sec for upward motion are possible. Monitor view: On the large touchscreen monitor, the ram position, set pressure, and active speed are always visible. In semi-automatic mode, all cycle values are displayed. They can be saved or loaded as needed. The control panel consists of two-hand operation, the joystick, the emergency stop button, and the mode selector for: - Table extension/retraction (two-hand operation active) - Table tilt up/down (two-hand operation active) Gedpofxyi Djfx Afqjbg - Ram raise/lower (joystick active) - Ram plate lower/raise (two-hand operation active)

Leto izdelave: 2007, Stanje: zelo dobro (rabljeno), Dryer Material Brand: MSM Model: HL 15 Year of manufacture: 2007 Gbsdpfokdblnox Afqeg Approx. 155 kg