Rokovalni manipulator vakuumski dvigalo

Schmalz 500 kg und 2000kg Hebeleistung

Stanje: rabljeno, • Load capacity: 350 kg • 6 suction pads, 250 mm diameter, adjustable • Vacuum lifter can rotate 90° and tilt 90° • Suction pads with guide tube and electric trolley • 4 units available, new and unused • Available immediately IV: + Design Standards 1. The construction of the system strictly complies with the European CE standard EN13155:2016, the American ASME (Mechanical Engineering Association) B30-20-2006 standard, and the German UVVI8 standard, with the key design parameters exceeding those required by the above standards. 2. Safety factor: The main structure features a safety factor of 4.0; the vacuum safety level is 65%, with the standard at 85%, which is 20% above the minimum safety standard. V+ Equipment Testing and Standards 1. General requirements Whether all materials are complete, whether the equipment’s exterior is painted or scratched, whether any suction pads or tubes are damaged. 2. Items tested before leaving the factory © Equipment suction test © Pressure retention test © Alarm function test © Various control components • Price on request Nsdpfx Agjxnvq Eexscr

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, moč: 18,5 kW (25,15 KM), vrsta prenosa: hidrostat, vrsta goriva: dizel, kapaciteta rezervoarja za gorivo: 50 l, barva: rdeča, skupna masa: 2.600 kg, lastna masa: 2.500 kg, dvižna moč: 1.000 kg/m, dvižna višina: 3.310 mm, stanje pnevmatik: 100 odstotek, konfiguracija osi: 2 osi, število sedežev: 1, prostornina žlice: 0,4 m³, širina izkopne žlice: 160 mm, Leto izdelave: 2025, nosilnost: 980 kg, Oprema: dodatne luči, hidravlika, kabina, nastavljiva roka, pogon na vsa štiri kolesa, spojka prikolice, standardna žlica, vilice za palete, zapora diferenciala, zaščita za glavo, The H&R 2210-T telescopic loader with the new 3-cylinder Perkins turbo engine (18.5 kW, Mannheim, Germany) meets the Euro 5 emissions standard, even without a particulate filter. The new turbo engine is particularly fuel efficient, and with its 2-stage hydrostatic drive, it achieves a speed of approx. 16 km/h. Thanks to the large steering angle of 42° and a tight turning radius, it is highly maneuverable even in the smallest spaces. The 2210T wheel loader with telescopic arm comes standard with a quick coupler, pallet forks, and a standard bucket, allowing you to begin work immediately. With the additional hydraulic control circuit, various attachments for the yard loader can be used. The telescopic arm provides the 2210-T with excellent reach. The electric gear function on the joystick makes operating the H&R 2210T especially comfortable. H&R loaders are technically and visually optimized in-house and undergo comprehensive inspection and testing. In addition, every machine receives extensive corrosion protection treatment. Our loaders are CE-compliant according to the EU Machinery Directive. For our machines, a TÜV Süd technical report is available for obtaining an individual road operation permit in accordance with §21 StVZO (road registration / operating permit as a self-propelled work machine). Advantages of the H&R 2210T Telehandler: • Fully equipped • Efficient German-made engine (Euro 5) • Extensively optimized in-house • Extendable telescopic arm • Heated comfort cab • Includes pallet fork • Includes standard bucket (150 cm) • Joystick with float position and electric gear • Additional hydraulics for front attachments • Hydraulic oil cooler • Brake inching pedal • Reversing camera with display • Rotating beacon • LED work lights front and rear • Wide tires 31 x 15.5 -15 • Radio with MP3 and USB • Adjustable steering column and seat • Hour meter and fuel gauge • Trailer hitch • 1-year spare parts warranty • CE compliant according to the EU Machinery Directive Ncodpfjul Af Dsx Agxer Price: Net: €24,975.00 VAT: €4,745.25 Gross: €29,720.25 Financing available! Options: 2-year warranty: €590 TÜV road registration / operating permit (work machine): €595 Transport within Germany & Austria upon request Technical Data: Engine: 3-cylinder Perkins turbo Power: 25 HP Emission class: Euro 5 Lifting capacity: 980 kg Lifting height: 3,310 mm (lower edge, standard pallet fork) Dumping height: 2,796 mm (lower edge, standard bucket tipped) Lift/lowering time: 4.0 / 3.5 seconds Wheelbase: 1.6 m Dimensions (L x W x H): 3,710 x 1,496 x 2,340 mm Weight: 2,430 kg Tires: 31 x 15.5 -15 Accessories and spare parts are available from us. Please include your phone number with inquiries!

Stanje: novo, Load capacity 500 kg Number of suction cups: 6 Diameter of suction cups: 215 mm Vacuum Lifter VH 6-500 For horizontal transport of smooth, dry, and airtight panels. Robust load-bearing structure made of steel, painted in RAL 2000 with low dead weight. Consisting of: Ncodpfx Ajq Sc Ausgxor - 1x Galvanized longitudinal beam, length 2,400 mm - 3x Galvanized crossbeams, each 1,000 mm in length - 6x Spring-mounted, articulated, and adjustable suction cup holders - 6x Suction cups Ø 215 mm; in case of wear, the sealing ring can be replaced separately from its metal carrier, cost-effectively and without tools - 6x Ball valves for individually shutting off each suction cup, enabling smaller formats to be lifted without moving the suction cups or beams - 1x Spiral connection cable, small coil: * extendable to 3,500 mm, version as extension cable with CEE plug and coupling * routed next to the load chain to the hoisting device - Low-maintenance, high-quality, dry-running rotary vane vacuum pump with a suction capacity of 8 m³/h and a final vacuum of 85% (150 mbar) - Electrical connection: 3-phase 230/400 V + PE, 50 Hz, with cable (approx. 0.5 m long) and CEE plug (16 A). Isolation transformer integrated into the control system (necessary if the vacuum lifter is connected via the crane trolley and there is no neutral conductor) - Extendable operator handle to 1,000 mm from beam center. Sturdy metal pouch for your crane control included at no extra charge. - Operation "Suction / Release" via manual slide valve: Wear-free and highly robust manual slide valve for safe suction and release after pressing the release button (double-action release according to EN 13155) - Control and safety unit for vacuum lifter: * Robust control box * Contactor circuit for the vacuum pump * Safety warning device with audible signal * Vacuum gauge with danger zone indication * Large vacuum reservoir with safety non-return valve * Double-action operation for load release - Fine dust filter to protect the vacuum pump - Comprehensive and easily understandable documentation - Warranty on material and manufacturing defects: one year in single-shift operation (excluding wear parts) Initial inspection according to UVV 18, VBG 9a with CE declaration of conformity according to EN 13155 - Packaging suitable for truck transport.

Stanje: novo, Load capacity in kg: 1000 kg Reach: 4000 mm Height: 3000 mm (underside of jib) Total column height: 3790 mm Slewing range: 270 degrees Total weight: approx. 525 kg Description: - Festoon cable power supply for trolley - Drag chain, cable sag approx. 800 mm - Operation from floor using pendant control Including: - ABUS electric chain hoist - Chain hoist type GM 4 1000.5-2, double-strand - Painted in RAL 5017 traffic blue - Lifting capacity 1 t - Hook travel 3000 mm - Maximum hook position 2442 mm - Design basis FEM 9.901 - Mechanism group 2m / M5 - Lifting, 2-speed (pole-switchable) 1.3 / 5 m/min - Lifting power 0.22 / 0.9 kW - Duty cycle 60% ED - Switching frequency 360 c/h Ncodpfx Asxak Hxjgxsr Overload protection The crane system complies with the requirements of Machinery Directive 2006/42/EC as well as current UVV regulations DGUV Regulation 52 (formerly BGV D6). Included: - Anchor rods L200 (set) size LS 200 - Consisting of 8 pieces M27 mm x 800 mm with 1 steel template (500/8) - For foundation anchoring, including grouting accessories For alignment of the slewing jib crane, a mounting gap between the column base and the building floor must be provided. The mounting gap is to be grouted by the customer after approx. 4 weeks of crane operation. Illustration shows a similar crane system.

Stanje: zelo dobro (rabljeno), SINGLE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness for rolls (min/max) mm: 0.3 / 3 – for solid strips mm: max 1 Panel thickness (min/max) mm: 14 / 60 (LASER – Max 50) Control system: ICOS Open Feed speed m/min (adjustable): 6 – 30 Top pressure: V-belt driven Sprayer unit (for liquid anti-adhesive) Adjustable fence, CNC controlled Panel infeed system Jointing cutter unit with CNC control 08.378 (2 x 4.5 kW) Edge pressure zone (CNC controlled) Gluing unit (PUR glue + premelter) 283.201 + 283.203 Gluing unit (premelter with laser) Laser System LASERLINE Spraying unit (for separating fluid) Pressure section + edge magazine for rolls (compartment No.) 36 + 12 End trim unit 08.428 (0.2 kW x 2) Speed up to 30 m/min (0°–25°) Pre-milling unit 08.0555 HS/LS1 (1 kW x 2) Ncsdei Hn Srjpfx Agxsr Multi-profile milling unit (CNC controlled) 08.0587 (0.66 kW x 1) 4 profiles Contour trimming unit (for fine trimming), CNC controlled KFA 30 (0.5 kW x 1) max. 30 m/min Multi-profile scraping unit (CNC controlled) 08.0516 (4 profiles) Flat scraper unit 08.521 Sprayer unit (for polishing fluid) Buffing unit 08.614 (0.25 kW x 4) Universal milling unit for grooving/rabbetting and profiling 2x08.190 (4.5 kW x 2) 90°/180°/270° (CNC)

Stanje: zelo dobro (rabljeno), Viessmann Vitoplex 270 kW nizkotemperaturni kotel Ncsdpfx Aewiqlcegxer

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, x-axis travel: 4216.0 mm y-axis travel: 2007.0 mm z-axis travel: 305.0 mm CNC control Table size: 4902.0 x 2134.0 mm Max. workpiece weight: 1465 kg/m² Machine weight: approx. 2500 kg Total power requirement: 30 kW Space requirement: approx. 5486.0 x 3708.0 mm The compact bridge-style waterjet cutting machine features a torsion-resistant steel frame with a specialized, durable anti-corrosion coating. Both X axes and the particularly elevated Y axis utilize the maintenance-free Intelli-TRAX drive system, specifically developed by OMAX to meet the unique demands of waterjet cutting applications. Equipment: - Motorized Z axis - Water level control - Abrasive feed system with AFS 1000 abrasive delivery unit - High-pressure system made of special stainless-steel tubing - MAXIEM direct pump M4050 - OMAX PC control software Intelli-MAX for MAXIEM Nsdjyclvnopfx Agxscr - OMAX PC control software Intelli-MAX Premium - Cutting head technology based on the 5-axis A-Jet taper compensation head - Height sensor for the 5-axis A-Jet cutting head - Laser pointer for positioning assistance - Automatic sludge removal system MBM ASAS-ME - Compressed air injection for the automatic sludge removal system MBM ASAS-ME - Clamping and fixturing set for sheet and workpiece securing - Catch grate in the cutting tank - Sensors for automatic process monitoring - Water treatment via water conditioning system, including water analysis - Omni-Start (Vacuum Assist) piercing aid for brittle and laminated materials

Stanje: dober (rabljeno), Leto izdelave: 1972, Scissor lift table, scissor lifting table, scissor platform, scissor lift platform, single scissor lift table -Manufacturer: Lödige, scissor lift table -Load capacity: 1,000 kg -Platform dimensions: 3,000 x 2,000 mm -Lowered height: 390 mm -Raised height: 2,000 mm Ncsdpfjmghawex Agxjr -Hydraulic unit: Bauknecht 3 kW / 150 bar -Transport dimensions: 3,000 x 2,000 x H390 mm -Own weight: 2,100 kg

Stanje: zelo dobro (rabljeno), Viessmann Vitoplex 225 kW grelni kotel, zemeljski plin, olje ali bioplin Ncodpfx Agew Ey Dmjxsr

Stanje: rabljeno, Hydraulic Low-Profile Scissor Lift Table FLEXLIFT FLUNDER Type 1500 / 100 (without hydraulic power unit) Year of manufacture: 1991 Nominal load capacity: 1,500 kg Lifting capacity (practically tested): 1,000 kg (at approx. 350 bar) Platform dimensions: 2,100 x 1,400 mm Lift stroke: max. 930 mm Installation height (lowered): 100 mm (with mounting frame) Installation height (raised): 1,030 mm Hydraulic operating pressure: 350 bar = lifting capacity 1,000 kg Hydraulic motor power: 1.5 kW Electrical connection: 400 Volt, 50 Hz - Mechanical-hydraulic safety limit switches stop the lowering process when the safety edge is actuated Ncsdpfxel Nbqcj Agxer - No hydraulic power unit included - No electrical controls included Mounting frame length: 2,270 mm Mounting frame width: 1,580 mm Mounting frame height = installation height (lowered): 100 mm Net weight of lift table: 500 kg Good condition