Navpična stružnica - enojni stolpec

SCHIESS 25 DKE 250

Stanje: dober (rabljeno), Leto izdelave: 2018, Internal item no.: 25043 5-Axis CNC Machining Center POSmill H 500 U Year: 2018 Only approx. 1,000 spindle hours since spindle replacement Total machine hours: approx. 20,500 2024: Spindle replaced (18,000 rpm) 2024: Geometry re-calibrated Bljdpowz I Acofx Afqjr Travel paths: X 650 / Y 850 / Z 500 mm Rotary table: 360° continuous Control: Heidenhain iTNC 530 Spindle: 18,000 rpm Spindle taper: HSK-A63 The machine is equipped as follows: - 60-position tool changer - ICS (20 bar) with belt filter system - Air through spindle - Kessler table, 500 mm diameter - Infrared part measurement – 3D probe - Tool measurement via BLUM laser - Rotational viewing window - POS DCM collision module - Mobile electronic handwheel - Oil mist extraction - Heidenhain linear measuring systems X, Y, Z - Purge air for all linear measuring systems - Active air-to-air electrical cabinet cooler - Active cooling for 4th & 5th axis, controlled - Network and USB connection - Controlled spindle chiller - Heidenhain rotary measuring system - POS contour monitoring - External hinged belt chip conveyor - Coolant pump at head, controlled via M functions - Pump for chip rinse system - Chip rinsing equipment - Machine status indicator - Air at spindle - Oil/coolant separator, electromechanical - Automatic coolant level monitoring - 3-fold media connection at table center - Hydraulic unit incl. control via M function Connected load: 60 kVA Installation dimensions: W 4800 / D 4600 / H 3000 mm + ICS unit (LxWxH): 2200 x 1300 x 1400 mm Weight: approx. 13,000 kg The machine is in very well-maintained condition and comes from a small, family-run company. In 2024, the spindle was replaced and geometry was calibrated (guides repaired and aligned). Since then, the machine has seen only limited use.

Stanje: rabljeno, Leto izdelave: 2001, Space requirement approx. 1450 x 1560 x 2620 mm Machine weight approx. 1.8 t The machine base is a heavy-duty welded construction. The coolant tank is integrated into the machine bed. The cross table is made of cast iron; the guideways are ground and scraped with adjustable gibs. The ram head is also made of cast iron, the guides are ground and scraped, and equipped with lubrication grooves. The ram head can be swiveled +/- 20 degrees. Stroke is adjustable via a side opening. The tool is positioned against the longitudinal stop. The machine is equipped with a mechanical stroke drive. The CNC rotary table controller is housed in the operator panel. The zero point can be set in any desired position of the indexing head with division options from 2-999 symmetric and 99 asymmetric divisions. Machine color: Green Indexing head color: Red Bljdpfx Aswbi Awofqer --> Technical Data Adjustable stroke from 0 up to: 250 mm (No. 1) Distance column/tool holder: 425 mm (No. 2) Distance table surface/head: 430 mm (No. 3) Vertical ram adjustment: 430 mm (No. 5) Rotary table diameter (NC on axis A): 450 mm (No. 6) Longitudinal table travel (NC on axis Y): 250 mm (No. 8) Cross table travel (NC on axis X): 220 mm (No. 9) Bore at the table center: 135 mm (No. 10) Infinitely variable ram strokes per minute: 22-90 strokes/min Ram motor power (automatic brake, asynchronous): 3 kW Dimensions (ram fully raised; LxWxH): 1450x1560x2620 mm --> Digital operating manual available in German and English

Stanje: dober (rabljeno), Leto izdelave: 1987, premer struženja nad prečnim suportom: 810 mm, izvrtina vretena: 130 mm, premer struženja: 1.140 mm, stružna dolžina: 7.500 mm, poteza s peresom: 300 mm, skupna dolžina: 7.500 mm, skupna širina: 2.300 mm, skupna višina: 1.650 mm, širina postelje: 600 mm, Please note: these are not original pictures. The length is only 3000 mm, not 5000 mm. 3-guideway bed construction 2-axis Heidenhain digital readout Bljdov S Dp Ijpfx Afqjr Power feed in 3 directions on all tool post slides Central lubrication Workpiece weight when flying in chuck: 2,500 kg Workpiece weight unsupported: 8,500 kg Workpiece weight supported: 10,000 kg Optional: 4-jaw chuck approx. 1,200 mm Optional: 4-jaw chuck approx. 1,500 mm Optional package with 3 fixed steady rests, for workpieces from ... to ... Turning length: 5,000 / 7,500 mm Swing diameter over bed: Ø 1,140 mm Swing diameter over cross slide: 810 mm Swing diameter in gap: Ø 1,500 mm Gap length: 2,500 mm Spindle bore: 130 mm Bed width: 600 mm Quill diameter: 130 mm Quill stroke: 300 mm Spindle taper: 6 Morse taper Motor power: 25 kW Speed range: 9 – 900 rpm Length: 7,500 mm Width: 2,300 mm Height: 1,650 mm Weight: 12,000 kg

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 9.000 mm, pomik osi Y: 4.000 mm, pomik po osi Z: 1.000 mm, FREZALNI / VRTALNI STROJ S PREMIČNO KOLOMNO CME TEHNIČNE LASTNOSTI CME - MOŽEN OGLED V OBRATOVANJU Znamka: CME Model: MB 9000 Leto: 2007 CNC: Siemens Sinumerik 840D Os X: 9000 mm Bljdpfx Afeu R Rk Heqsr Os Y (vertikalno): 4000 mm Os Z: 1000 mm Os W (Ø 150 mm): 700 mm 2 rotacijsko-translacijski mizi (Linearna pot: 2000 mm) 2500 x 2500 mm, nosilnost 25 t Heidenhain optične letev na vseh oseh Neposredna glava Zamenjava orodja, 90 mest ZF menjalnik Notranje hlajenje Odvzemanje ostružkov

Stanje: novo, Leto izdelave: 2024, Tank rotator with 10-ton load capacity Dual synchronized drive Axle spacing steplessly adjustable via threaded spindle Speed steplessly adjustable with foot remote control Bledpfx Asifk Rbsfqer For diameters from 300 mm to 3,500 mm Roller width and diameter: 120 x 270 mm Speed: 200 – 1,200 mm/min.

Leto izdelave: 1989, Stanje: zelo dobro (rabljeno),

Stanje: generalkompletno obnovljen (rabljeno), Portalrichtpresse Druckkraft: 450 t Hub: 50 mm Lichte Weite: 1000 mm Arbeitsbereich: Länge: 5.200 mm Breite: 2.300 mm Höhe: 1.000 mm Gewicht: 45.000 kg Schraubenabstand links-rechts: 1.000 mm Bledpfx Afefcnu Ieqsr

Stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, premer struženja nad prečnim suportom: 240 mm, izvrtina vretena: 58 mm, premer struženja nad ležiščem sani: 430 mm, višina središča: 215 mm, stružna dolžina: 760 mm, poteza s peresom: 127 mm, premer tulec: 58 mm, skupna dolžina: 1.885 mm, skupna širina: 810 mm, največja hitrost vretena: 2.000 obr/min, hitrost vretena (min.): 20 obr/min, širina postelje: 300 mm, skupna masa: 1.680 kg, nosilec puše: MK 4, Centre height: 215 mm Centre distance: 760 mm Spindle bore: 58 mm Spindle nose according to DIN 55029 Camlock D6 Motor power: 5.5 kW Spindle speed range: 20–2000 rpm Weight approx. 1680 kg Equipment includes, among others: Hardened and precision-ground Z-axis guideways Turcite coatings (on counterface) of the cross and top slides Manual central lubrication with a pump for longitudinal and cross slides Complete coolant system with rear splash guard and slide splash protection Chuck guard Control bar with 3 adjustable cams Blodpfx Ajcir Anefqsr Machine lamp Fixed centre Set of machine mounting plates

Stanje: dober (rabljeno), Težki stružnica, stružnica, stružna postelja, vodilno-vlečni stružnica, Leit- und Zugspindel-stružnica -Proizvajalec: Meuser, vodilno-vlečni stružnica tip M-IV-S -Postelja stroja: kaljena -Dolžina struženja: 3800 mm -Premer struženja nad posteljo: 720 mm Bjdpfx Afowrfkfoqolr -Premer struženja nad suportom: 440 mm -Vretenina odprtina: Ø 95 mm -Hitrosti vretena: 22,4 - 1000 o/min -Klinično vpenjalo Forkardt Ø 400 mm -Držalo konjička: MK6 -Pogon: 18 kW -Oprema: 1x luneta, Multifix nosilec orodja, orodja glej fotografije -Dimenzije: 5930/1650/H1600 mm -Teža: 7500 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Travel distances X/Y/Z: 900 x 400 x 200 mm Bledpfx Aov Irwrofqsr Table size: 800 x 400 mm