CNC CILINDRIČNI BRUSILNI STROJ

Schaudt Mikrosa BWF PS 51 N 600

Stanje: rabljeno, Leto izdelave: 2005, Stroj za brušenje zobnikov Reishauer RZ150 Nodpsxz E Srsfx Agxocr

Stanje: rabljeno, Grinding diameter: 350 mm Grinding length: 600 mm Centre height: 175 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MT5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivelling: 360° Grinding headstock swivelling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Incremental infeed: 0–9.99 mm/Ø Continuous infeed: 0–9.99 mm/Ø Table swivelling: ±10° Longitudinal table travel: 1100 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Max. workpiece weight in flying operation: 130 kg incl. clamping Cross travel max.: 270 mm Internal spindle mount: 80 mm Tailstock quill mount: MT3 Quill travel: 30 mm Total power requirement: 6.5 kW Machine weight approx.: 3.05 t Space requirement approx.: 4 x 2 m Overhauled according to Kellenberger guidelines, including new, modern and future-proof control system. Photo shows delivered machine with 1000 mm centre distance. - The operation via the touch panel is very straightforward. - The symbols on the control panel are almost identical to the original control system, making operator retraining unnecessary. - Diagnostic function with display of PLC information and digital I/O. - Dressing function can be extended or changed as per customer request. - On request, spindle orientation hold for the workpiece spindle is available. - New maximum infeed amount of 40 mm, further expansion possible on request. - Digital display in 2 axes. X-axis resolution 0.5 μm. Options: - Encoder with digital display on the workpiece headstock - Encoder with digital display on the grinding headstock (no height adjustment possible via spindle) - New robust internal grinding attachment diam. 80 mm or 100 mm - Increase centre height to max. 225 mm - Speed control for the grinding spindle Included: - Operating tools - Clamping tube for chuck Additional accessories on request. The machine features an electronically controlled infeed system with stepper motor drive on the X-axis. Hydraulic table longitudinal and rapid traverse movement. Versatile application in production for external cylindrical and internal grinding, or for external, face, and internal grinding in a single setup of individual parts. Optional features: - Semi-automatic dressing cycles for external and internal grinding Ncedpeuxft Esfx Agxsr - Automatic dressing compensation - Measurement control unit Note: The machine tool does not currently meet the basic safety and protection requirements as outlined in BetrSichV 2015. A risk assessment according to BetrSichV must be carried out to determine if the required minimum protection target can be met.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, obratovalne ure: 2.472 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 470 mm, pomik po osi Z: 876 mm, moč vretenovega motorja: 30.000 W, največja hitrost vretena: 1.250 obr/min, hitro pomikanje X-os: 24 m/min, hitri pomik os Y: 24 m/min, premer struženja: 1.000 mm, skupna dolžina: 2.375 mm, skupna višina: 3.659 mm, skupna širina: 4.558 mm, vrsta vhodnega toka: trifazni, vrtilni moment: 3.655 Nm, vhodna napetost: 400 V, skupna masa: 13.000 kg, Oprema: hladilna enota, CNC vertikalni stružnica MAZAK Mega Turn 900 TEHNIČNE LASTNOSTI: Leto izdelave: 2018 Krmljenje CNC: MAZATROL SmoothG Največji premer struženja: 920 mm Največji premer obdelave: 1000 mm Pomik X osi: 470 mm Pomik Z osi: 876 mm Hitri pomik X osi: 24.000 mm/min Hitri pomik Y osi: 24.000 mm/min Vreteno (prirobnica): A2-15 Največje število vrtljajev vretena: 1.250 min⁻¹ Moč glavnega vretena: 30 kW Navor vretena: 3.655 Nm Maksimalna razdalja od čela vretena do čela revolverja: 1.030 mm Največja masa obdelovanca: 3.000 kg Minimalna razdalja od čela vretena do čela revolverja: 154 mm Število orodnih postaj: 12 Čas indeksiranja revolverja: 0,4 s/pozicija Kapaciteta rezervoarja za mazanje: 516 l Skupna potrebna moč: 58,9 kVA Naznačen tok: 109 A Napetost napajanja: 400 V Delovne ure: 2.472 h Število rezalnih ur: 2.297 h Dimenzije stroja (DxŠxV): 2.375 × 4.558 × 3.659 mm Teža: 13.000 kg Ncedpfeym Surjx Agxjr OPREMA V CENI: x1 vpenjalna glava Ø800 mm, KITAGAWA tip NV-32C1515 x1 komplet trdih čeljusti x2 kompleta mehkih čeljusti x10 nosilcev orodij (stolček) x24 nosilcev orodij KENNAMETAL tip KM50 x1 izvlečna roka za merilno sondo orodij x1 dvojna nožna pedalna enota za vpenjanje glave x1 rezervoar za hladilno tekočino x1 transporter odrezkov x1 separator emulzijske megle LOSMA tip Galileo GP500 x1 komplet 4 dvižnih ušes x1 komplet zaklepnih elementov osi (za transport stroja) x1 Mazak orodna škatla z različnimi servisnimi ključi Različna programska navodila Stroj je mogoče videti pod napetostjo v naši hali po predhodnem dogovoru. Cena po dogovoru, nakladanje na tovornjak vključeno. Možna je dostava po celem svetu. Informacije so pridobljene po naših najboljših močeh, točnost ni zagotovljena. Stroji primerljivi z Biglia, Index, Tsugami, Miyano, Star in DMG Mori Tornos stružnicami ter tudi rezkalnimi stroji, brusilnimi stroji in CNC stroji.

Stanje: rabljeno, Leto izdelave: 1998, številka stroja/vozila: 100057, 1998 AMADA VIPROS 2510 KING Stroj za prebijanje je v dobrem stanju, redno in pravočasno servisiran s strani uradnega servisa Amada. Vsa dokumentacija je priložena. Napravo je možno upravljati s prebijalno silo 196 kN. Izdelano na Japonskem. Stroj je še vedno priključen na elektriko in ga je možno kadarkoli preizkusiti v Vilni, Litva. Specifikacija: Model: AMADA VIPROS 2510K Serijska št.: 100057 Leto izdelave: 1998 Izdelano v: Japonska Prebijalna sila: 20 ton Ncedpem Ncayjfx Agxsr Postaje: 31 Orodja: priloženi (RO 6; RO 6,5; RO 3; RE 30x5; RE 25x5; RE 80x5; RO 5; RO 3,5; RE 10x3; RE 10x5; RE 50x5; RE 8x12) Maksimalna debelina pločevine: 3 mm Pomik po X osi: 2500 mm Pomik po Y osi: 1270 mm Teža: 11.000 kg Lokacija: Vilna, Litva Možnost preizkusa: Da Za dodatne informacije nas prosimo kontaktirajte.

Stanje: dober (rabljeno), Leto izdelave: 2014, obratovalne ure: 8.035 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: MH0017-000100, potovalna razdalja osi X: 1.400 mm, pomik osi Y: 1.050 mm, pomik po osi Z: 1.200 mm, proizvajalec krmilnikov: fanuc, model krmilnika: 31i, delovne ure vretena: 6.000 h, Doosan NHP 8000 horizontal machining center, new, equipped with Fanuc 31i control cabinet Included equipment and options: 800x800 mm pallet centering system Hand-held coolant gun High-pressure coolant system, 70 bar, 7.5 kW with cyclone filtration Automatic tool changer Tool load monitoring Chip conveyor Renishaw RMP60 workpiece probe TS27R tool probe Nedpfxewu Rgqo Agxocr

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Rabljeni stroj za brušenje zobnikov Niles ZSTZ 630i. Stroj je v celoti delujoč, na zahtevo lahko pošljemo video. Nodpfx Aoxzfugegxjcr

Leto izdelave: 1993, stanje: pripravljen za uporabo (rabljen), številka stroja/vozila: Seriennummer: 9302394, CNC control HATASTAR 2000 Pressing capacity: 500 t or 5000 kN Tooling available in addition to the machine Control cabinet on the left X1- + R-/ X2- + R-axis on linear guide Y1- + Y2-axis Hydraulic upper tool clamping Pneumatic sheet follower device + front stops on linear guide Second two-hand operation Universal die 100x100x5'100 mm Gooseneck blade 280 x 5'100 mm Die centering plate, b = 111 mm Njdpfx Agjd Egc Aexscr

Stanje: rabljeno, Leto izdelave: 2000, Grinding diameter: 360 mm Grinding length: 1600 mm Njdpfxst Hw Rdo Agxjcr Centre height: 180 mm Internal diameter: 0 mm Grinding depth: 0 mm Swing diameter: 0 mm Total power requirement: 40 kW Machine weight approx.: 10,000 kg Space requirement approx.: m KARSTENS Universal "CNC" External, Internal and Face Grinding Machine with capabilities for multi-sided, non-circular, polygon, and thread grinding BWO CNC control Type 900 C, Type K 51-1500 Year of manufacture: 2000 Serial no. 99 033 _____ Centre height: 180 mm Centre distance / Grinding length: 1,700/1,600 mm Max. workpiece weight between centres: 250 kg External grinding: Grinding diameter approx.: 5 - 360 mm Grinding wheel size (diameter x width x bore): 500 x 100 x 127 mm Grinding spindle speeds (35 m/s / 50 m/s): 1,900 / 2,200 rpm Drive power external/face/internal: 7.5 / 7.5 / 4.0 kW Grinding spindle head: 3 positions B-axis swivel range: 240 / 17.5 ° X-axis / Cross slide stroke: 360 mm Grinding slide feed rate: 0.001 – 125 mm/min Workpiece spindle speeds, steplessly adjustable: 1 – 1,000 rpm C-axis spindle mount / Bore, 24 mm MK 4 Table feed (Z-axis): 0.01 – 10 m/min Total drive power: 40 kW - 400 V - 50 Hz Weight approx.: 10,000 kg Accessories / Special features: Universal CNC cylindrical grinding machine for almost all grinding tasks, suitable particularly for non-circular grinding / eccentric & cam profile grinding, polygonal grinding, as well as face grinding of multi-sided workpieces and even thread grinding with corresponding grinding wheel profiles. Freely programmable BWO CNC controller with numerous subprograms and easy parameter input. Grinding of multiple diameters in a single clamping possible. - B-axis with three grinding spindles, one with MOVOMATIC touch probe - MOVOMATIC pneumatic diameter gauge CR 60 for mounting on the grinding table, control unit type ES 400 - MPM grinding wheel balancing unit, straight dresser with diamond fleece mounted on table, powered diamond wheel dressing device - Workpiece spindle head pneumatically movable, hydraulic tailstock with adjustable quill - Various further accessories, but without coolant equipment Condition: good to very good – demonstration possible under power Ideal machine for spindle manufacturing, etc. Delivery: ex-stock – as inspected Payment: strictly net – upon receipt of invoice

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, Centre height: 181 mm Centre distance: 1000 mm Max. grindable workpiece diameter: 360 mm Max. cantilever load: 1000 N (100 kg) Max. load between centres: 3000 N (300 kg) Ncodpfotqf Rzox Agxjr Z-axis: Table swivel angle: 10° Hydraulic table drive: 0-4 m/min X-axis: Cross slide travel: 80 mm Rapid traverse (hydraulic): 50 mm Coarse adjustment (air cushion): 280 mm Feed drive via DC motor Rapid feed speed: 48 mm/min/Ø Feed operation: Plunge grinding / longitudinal grinding 4 presettable feed rates mm/min/Ø: 0.01-48 4 presettable feed amounts mm: 0.001-0.1 Sparkout during form grinding: 0-99 s / 0-99 strokes Tip feed mm/Ø: 0.001 Grinding spindle head: Universal, swiveling 0-180° Grinding wheel (external): D x w x d mm: 500 x 100 x 127 or 203.2 Grinding wheel (face; option): D x w x d mm: 250 x 32 x 76.2 Grinding wheel (internal; option): D mm: (2-250) Drive power – external/face: 5.5 (7.5) kW Drive power – internal: 2.2 kW Peripheral speed – external: 35 (50) m/s Grinding wheel wear (external): 160 mm/Ø Guard width: 100 mm Grinding spindle diameter: 60 mm Internal spindle mounting: 80 (100) mm Workpiece spindle head: Infinitely variable drive: Mk 4, 1/min: 30-270 / 50-450 Workpiece spindle lockable Spindle mount: Mk 4/24 mm Spindle nose for flange mounting: Mk 4, cylindrical Ø63H6 x 6 mm Workpiece spindle head swivels on rotary part: 0-90° Tailstock: Quill mounting/quill diameter: Mk 4/750 mm Quill stroke: 45 mm Quill force: 100-800 N / 250-1400 N adjustable Quill operation: manual (foot switch) Fine quill adjustment: ±40 µm Connection values: Total machine connected load: 6.5-10 kW Grinding spindle head: 5.5 (7.5) kW Workpiece spindle head: 0.55 (1.1) kW Coolant filtration: 0.75–2.2 kW Lubrication pump for guideways: 0.1 kW Hydraulic pump: 1.5 kW Hydraulic reservoir: 80 L Pneumatic system: 6 bar Comparable to: Weiss / EMAG / GP cylindrical grinders / Studer / Kellenberger / Schaudt / Tschudin / Tacchella / Dannobat

Stanje: generalkompletno obnovljen (rabljeno), številka stroja/vozila: 4507, ESTARTA 327 centreless grinding machine Nodpfxjg Ix Hms Agxscr