Večvretenični stroj
Schütte SF 51 DNT

Name: Schütte SF 51 DNT
Brand: Schütte
Availability: InStock

Leto izdelave

1992

Stanje

Rabljeno (popolnoma funkcionalen)

Lokacija

Sachsen-Anhalt Nemčija

Spremljaj dražbo

Podatki o stroju

Oznaka stroja:: Večvretenični stroj

Proizvajalec:: Schütte

Model:: SF 51 DNT

Leto izdelave:: 1992

Stanje:: pripravljen za uporabo (rabljen)

Funkcionalnost:: popolnoma funkcionalen

Tehnične podrobnosti

Premer palice (maks.):: 51 mm

Stružna dolžina:: 102 mm

Globina vrtanja:: 102 mm

zagotovitev

Lokacija:: Sachsen-Anhalt, Nemčija – Razdalja: pribl. 701 km

Razpoložljivost:: takoj po zaključku dražbe

Dobavni pogoji:: FCA

Stroški demontaže in nakladanja:
brezplačno

Prevzem na lokaciji:
brezplačno

Stroški pošiljanja:

Opis

No reserve price – guaranteed sale to the highest bidder!

The machine is sold with collets, tool holders, and additional accessories!

For more Schütte multi-spindle machines available from the same location, see below!

TECHNICAL DETAILS

Max. turning length: 102 mm
Max. drilling depth: 102 mm

Largest bar diameter, round: 51 mm
Largest bar diameter, square: 36 mm
Largest bar diameter, hexagon: 44 mm
Largest bar diameter, octagon: 47 mm
Spindle circle diameter: 340 mm

Standard bar feed: 125 mm
Special bar feed: 290 mm

Longitudinal slide travel, standard, total: 125 mm
Longitudinal slide travel, standard, working travel: 100 mm
Longitudinal slide travel, special, total: 160 mm
Longitudinal slide travel, special, working travel: 125 mm

Cross slide travel, upper slide, total: 60 mm
Cross slide travel, upper slide, working travel: 36 mm
Cross slide travel, middle slide, total: 60 mm
Cross slide travel, middle slide, working travel: 36 mm
Cross slide travel, lower slide, total: 70 mm
Cross slide travel, lower slide, working travel: 44 mm

Maximum material pass-through: 51 mm
Maximum material feed: 125 mm

MACHINE DETAILS

Coolant capacity: 660 l
Pump flow rate: 170 l/min

EQUIPMENT
Thread cutting device
Right-hand thread via undercutting

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.

Obdelava plačil

Dodatni stroški nakupa:: 18 %

Plačilni pogoji:: 100 % predplačilo

Načini plačila:: Bančno nakazilo

Račun se izdaja v višini najvišje ponudbe, pri čemer se prištejejo morebitni stroški demontaže/nakladanja, stroški pošiljanja ter dodatni stroški nakupa in zakonski DDV.

Podrobnosti ponudbe

ID oglasa:: A21918578

Referenčna številka:: AUC-2605120

Posodobitev:: nazadnje dne 13.05.2026

Ekskluzivna ponudba:: na voljo samo na dražbi

Opazovati

Kontakt

Kontaktna oseba: Cedric Schuhmann

ID stroja: 21918578

+49 201 8... oglasi

Telefon: +49 201 857 861 77

Zaščita kupca Machineseeker

Varno plačilo prek fiduciarniega računa

Strogo preverjeni prodajalec

Osebna in večjezična podpora

Izplačilo kupnine se izvede šele po predaji blaga.

ogled

Možen ogled

Machineseeker v splošnem priporoča ogled rabljenih strojev.

Vsi podatki so vneseni po najboljšem vedenju in vesti – prepričajte se na kraju samem.

Ponudnik

Profesionalni komercialni prodajalec
Od 2017 pri Machineseeker

Sachsen-Anhalt Nemčija

Razdalja: pribl. 700 km

Tukaj bi lahko stala vaša naprava

Dražba s številko 1

Prodate v samo nekaj tednih!

Prodajate po najvišji ceni!

Prodajate brez fiksnih stroškov in tveganj!

ali pokličite +49 201 857 861 10

Razpravljati o sodelovanju

Ti oglasi bi vas prav tako lahko zanimali.

Mali oglas

CNC večvretenska stružnica Schütte SF 42/SF 51 DNT

Nemčija

650 km

CNC večvretenska stružnica
SchütteSF 42/SF 51 DNT

Pokliči

Leto izdelave: 1977, stanje: pripravljen za uporabo (rabljen), Na voljo sta dve šestvretenski stružnici Schütte skupaj z nalagalnim magazinom Iemca. 1) Schütte SF 42, letnik: 1977, število vretenc: 6, največji premer materiala: 42 mm, maksimalni vzdolžni hod sani: 125 mm, hitrost vrtenja: 2240 min⁻¹, dimenzije stroja X/Y/Z: pribl. 6500 mm/1400 mm/2200 mm, teža: pribl. 10.000 kg. Vključno z odjemno vretensko glavo, krivuljami, vpenjalnimi čeljustmi, transporterjem za ostružke, izsesovanjem oljne meglice in staničnim nalagalnim magazinom Iemca PRA40/33/P. 2) Schütte SF 51 DNT, leto izdelave: 1987, maksimalni premer materiala: 51 mm, število vretenc: 6, maksimalna dolžina obdelave: 102 mm, maksimalna globina vrtanja: 102 mm, premer kroga vretenc: 340 mm. Vključno z odjemno vretensko glavo, CNC-prečnim sani na poziciji 4, krivuljami, vpenjalnimi čeljustmi, dodatno črpalko za hladilno sredstvo in transporterjem za ostružke. Dokumentacija je na voljo. Ogled na lokaciji je možen. Gsdpfxjzbuuwj Aa Uouc

Poglej podrobnosti

Mali oglas

Berlingo

392 km

Schütte AG20
SchütteAG20

Pokliči

Mali oglas

Večvretenska avtomatska palica SCHÜTTE SF51 DNT

Nemčija

780 km

Večvretenska avtomatska palica
SCHÜTTESF51 DNT

Pokliči

Stanje: rabljeno, Leto izdelave: 1991, Technical Details: Number of spindles: 6 Spindle passage: 51 mm Schütte SF51 DNT, year of manufacture 1987, our ID #61868 Item: cam-controlled multi-spindle automatic lathe Manufacturer: Schütte Model: SF51 DNT Year of manufacture: 1987 Six-spindle automatic lathe with 6 main spindles max. nominal bar capacity D=51mm electronic cam controller Balluff Gripper in position 6 for rear-side machining, sorting chute independent longitudinal feed at position 5 screw-type chip conveyor Gjdpfx Asl Rmqpea Ueuc thread cutting clutches Interface for: bar loader magazine IEMCA PRA Bar loader IEMCA PRA40/33/F Scope of delivery excludes the blue chip conveyor The tooling may differ from that shown in the delivery scope! Please contact us for further information and pictures via mail(at) or

Poglej podrobnosti

Mali oglas

Večvretenska avtomatska palica SCHÜTTE AF42

Nemčija

682 km

Večvretenska avtomatska palica
SCHÜTTEAF42

Pokliči

Mali oglas

Iserlohn

793 km

Viličar
RMF MAXEINKSL 70D

15.500 €

~~17.500 €~~

VB plus DDV

Pokliči

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, vrsta goriva: električni, Diesel Compact Forklift, Manufacturer: RMF MAXEIN, Type: KSL 70D Year of manufacture: 2000, Lifting capacity: 7 t Fork length: 1.4 m, Lift height: 3.6 m Dimensions: Length with forks 4 m, Height 2.7 m, Width 1.5 m Hydraulic fork positioner, triplex mast. Guedpfj Tfywsx Aa Ujc Operating hours: 9,800 h With new safety inspection (UVV) upon purchase. Immediately operational.

Poglej podrobnosti

Mali oglas

Iserlohn

793 km

Sistem za transport ostružkov
BMFSPA

1.750 €

VB plus DDV

Pokliči

Mali oglas

Recikliranje čipov - celoten sistem Steimel + ARP + DGS Komplettanlage für Späne

Weinstadt

516 km

Recikliranje čipov - celoten sistem
Steimel + ARP + DGSKomplettanlage für Späne

25.000 €

VB plus DDV

Pokliči

Stanje: dober (rabljeno), Leto izdelave: 2004, We are selling a used recycling machinery system with the following components (year of manufacture: 2004): Gedpfxeri N D Ij Aa Ueuc - Chip crusher type RS 300 E with coarse material outlet (manufacturer: Steimel) - Drag chain conveyor with torque shut-off (manufacturer: DGS) - Chip centrifuge AZ - 250 with feed hopper (manufacturer: ARP) - Vacuum lock VSS 100 (manufacturer: ARP) - Pump sump (manufacturer: ARP) - Vibrating screen - Control cabinet The system is fully operational and ready for collection.

Poglej podrobnosti

Mali oglas

Večvretenska orodja Gildemeister GMC20 ONE

Nemčija

650 km

Večvretenska orodja
GildemeisterGMC20 ONE

Pokliči

Mali oglas

Rezkalni stroj DECKEL FP2 6810 mit schnellauf Fräßkopf

Burgoberbach

476 km

Rezkalni stroj
DECKELFP2 6810 mit schnellauf Fräßkopf

Pokliči

Stanje: dober (rabljeno), For sale is a Deckel FP2 with rapid traverse milling head (V-belt drive with gear ratio). Gujdpfx Ajlz R Iwea Ujc The machine was only used for copper and graphite machining, and therefore has not been heavily used. The machine is ready for immediate operation and fully functional. Retrofitting with a digital readout is possible for an additional charge. The machine can also be sold without the milling head. Dividing head NOT included. Accessories available at extra cost. Tool holder: SK 40 Travel (X/Y/Z): 400 / 200 / 400 mm Speed range: 40 - 2000 rpm Vertical spindle stroke: 60 mm Horizontal spindle stroke: 100 mm Feed rates: 8 - 400 mm/rev Table size: 700 x 330 mm Motor power: 2.2 kW Connection: 400 V / 16 A plug Weight: approx. 1300 kg All prices plus VAT. Machine Trade – Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY AND MORE. Do you need a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or to contact us, please visit our website.

Poglej podrobnosti

Mali oglas

Berlingo

392 km

Schütte SG18
SchütteSG18

Pokliči

Auction Conditions

The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.

Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
All prices and bids are net prices and do not include VAT.
Stated dismantling and loading costs are binding.
All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
The duration of an auction may be subject to change.
By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
Submitted direct or maximum bids are binding.
Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
The General Auction Terms of Machineseeker Group GmbH apply.