Stroj za valjanje in folijiranje

Schüco Isomat 4

Leto izdelave: 2006, stanje: pripravljen za uporabo (rabljen), skupna masa: 880 kg, Profilirni/krivljalni stroj iz leta 2006. Ta SCHÜCO ISOMAT 4 ima največji obratovalni tlak 0,8 MPa in nazivni tlak 0,7 MPa. S težo stroja 880 kg ter dodatnim varnostnim valjčnim kompletom, ki tehta 250 kg, je zasnovan za robustno delovanje. Če iščete visokokakovostni stroj za profiliranje, razmislite o SCHÜCO ISOMAT 4, ki ga ponujamo v prodajo. Za več podrobnosti nas kontaktirajte. • Napajalna napetost: 400 V • Frekvenca: 50 Hz • Nazivni tok: 3,5 A • Moč: 1,2 kW • Največji delovni tlak: 0,8 MPa • Nazivni tlak: 0,7 MPa Dodatna oprema Cgsdpfxsypcile Ahxjt • Opcijsko na voljo: velik komplet valjev in dodatna oprema, varnostni valjčni komplet (nastavitveni valjčni komplet), 250 kg

Stanje: novo, Leto izdelave: 2026, Technical data: • Extraction capacity approx. 5,200 m³/h • Motor power 3.0 kW • Speed 3,000 rpm • Voltage 400 V, 50 Hz • Extraction port 250/200 mm • Filter surface area 13.7 m² • Air velocity 28 m/sec • Number of filters: 28 • Dimensions: 752 x 1,982 x 2,144 mm • Weight: 300 kg • Filter category: G • Filter material: polyester • Noise level: 80 dB without connection, 65 dB when connected to the machine via ductwork Scope of delivery: • Complies with H-2 standard • Polyester filter, 5 microns • 2 containers Codpfx Ahjd H Rf Texsgt • Mobile undercarriage • Filter cleaning with a vibration system and control unit + €850 for models equipped with a fire extinguisher (Safe System)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, The Vertical Machining Centre enables drilling, milling, cutting, and notching operations within the technical parameters specified in the manual, on workpieces made of: plastic, PVC, ABS, methacrylate, polycarbonate, thermoplastic, composite, and aluminium materials. The vertical worktable allows for easy loading and unloading of processed parts and minimises the maximum dimensions of the machine to the essential minimum. Tool changing using a 10-position side-mounted tool magazine enables a wide range of operations without the need to remove the workpiece from the table. Maximum workpiece dimensions: X = 4200 mm Y = 1600 mm Z = 20 mm Rapid traverse speed (m/min): X = 30 Y = 30 Z = 15 Codpfomzbr Sjx Ahxegt Milling head units T1 and T2: Spindle power (kW): 3.3 Spindle speed (rpm): max 18,000 Electric spindle with clamp – ER32 Drilling head unit T3: Spindle motor power (W): 370 Spindle speed (rpm): max 2,800

Stanje: dober (rabljeno), Refrigeration compressor, chiller, refrigeration compressor unit, condensing unit, cooling compressor, compressor, motor compressor, cooling machine -Manufacturer: Bitzer, motor-driven compressor -Type: BHS 752 -Power: 4 kW / 1450 rpm -Displacement: 28.11 m³/h -Max. allowable operating pressure: 24.5 bar Cgjdpfx Aheguztgexjt -Dimensions: 640/450/H425 mm -Weight: 131 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, potovalna razdalja osi X: 762 mm, pomik osi Y: 406 mm, pomik po osi Z: 508 mm, proizvajalec krmilnikov: HAAS, največja hitrost vretena: 12.000 obr/min, število mest v zalogovniku orodij: 24, število osi: 3, This 3-axis HAAS VF-2SS-EU was manufactured in 2018. It features an impressive X-axis travel of 762 mm, a Y-axis travel of 406 mm, and a Z-axis travel of 508 mm. The machine is equipped with a side-mounted tool changer with capacity for approximately 24 tools and a spindle speed of up to 12,000 rpm. If you are looking for high-quality machining capabilities, you should consider the HAAS VF-2SS-EU vertical machining center we have for sale. Contact us for further details. Cgsdpfoywv Tnsx Ahxot • Country of origin: USA • Certification: CE • Electrical: 440 V, 3-phase, 50/60 Hz • Full load current: 33 A • Maximum load current: 33 A • Short-circuit capacity: 10,000 A • Software version: 100.19.000.1123 • Power-on hours: 1,056 h • Tool changes: 32,413 • Included machine equipment: coolant system, washdown gun, LED work light, fully enclosed work area • Condition: very good condition, low operating hours, well-maintained Additional Equipment • Machine vice • Probe Technical Specification Taper Size SK 40

Leto izdelave: 1991, stanje: skoraj kot novo (rabljeno), skupna masa: 1.420 kg, največja hitrost vrtenja: 1.485 obr/min, 3 stainless steel spiral volute process pumps 2 x CPK-CM 250-315, year of manufacture 1991 1 x CPKN-C1 250-315, year of manufacture 2011 !!! Price per unit !!! Pumps were operated on a test bench and all have very low operating hours! See pictures!! Flow rate: 1001 m³/h (278 liters/second) Delivery head / Pressure: 18 m / 1.8 bar Pump speed: 1485 rpm NPSH: 5.00 m Shaft seal: Single-acting mechanical seal with flushing water Manufacturer: Burgmann Impeller type: Closed radial impeller Impeller diameter: 324 mm Bearing type: Rolling bearing Lubrication: Oil Oil level monitoring Materials: 1.4408 (AISI 316) Pump casing: 1.4408 (AISI 316) Cgedpoqabiaefx Ahxet Wear plate: 1.4408 (AISI 316) Pressure cover: 1.4408 (AISI 316) Shaft: Heat-treated steel C45+N Impeller: 1.4408 (AISI 316) Bearing lantern: Cast iron JL1040 Shaft sleeve: CrNiMo steel Suction nozzle nominal diameter: DN 300 Discharge nozzle nominal diameter: DN 250 Nominal pressure suction side: PN 16 Nominal pressure discharge side: PN 16 Coupling manufacturer: Flender Coupling type: Eupex NH without spacer sleeve Baseplate: Painted cast iron Motor manufacturer: VEM K21R 280S4-Z Efficiency class: IE 0 Motor speed: 1480 rpm Frequency: 50 Hz Rated voltage: 400 / 690 V Rated motor output P2: 75 kW Thermal class: F Motor protection: IP55 Power factor (cos phi): 0.86 Dimensions: Length: 2120 mm Width: 950 mm Height: 1090 mm Weight: 1420 kg

Leto izdelave: 1999, stanje: zelo dobro (rabljeno), TRIULZI-IG glass tilting table Hydraulic Equipped with steering castors The rollers lower to enable 360-degree movement of the glass (for sealing purposes). Cgjdpfeiy Dtbox Ahxst Length: 3600 mm, Working height: 2400 mm Good working condition Good overall condition As is Immediately available

Leto izdelave: 1993, stanje: zelo dobro (rabljeno), 2 kosu centrifugalnih črpalk Proizvajalec: KSB Model: WKF 50/7 Pretok: 5,5 l/s (19,8 m³/h) Dvižna višina: 214 metrov (21,4 bar) Maks. temperatura: 130°C Tesnilo: Mehansko tesnilo z priključkom za zaporno vodo Elektromotor: VEM Pogonska moč: 30 kW Cgjdjibwaropfx Ahxst Hitrost vrtenja: 2935 obr/min ! Cena na kos !

Stanje: rabljeno, Leto izdelave: 2008, Bombiranje CNC krmiljeno Dolžina upogibanja 4250 mm 6-osni zadnji prislon Osvetlitev delovnega prostora Parkirni položaj 900 mm Hidravlično vpenjanje spodnjega orodja Cgsdpfx Aheyvr Apsxet Hidravlično vpenjanje zgornjega orodja Premik spodnjega orodja CNC Vgradna višina 615 Priprava za ACB

Leto izdelave: 2004, stanje: pripravljen za uporabo (rabljen), A fully automatic glazing bead saw by Schüco is available. Saw blade diameter: 400mm, cutting angles: 45°/90°, motor type: E63SP-2, speed: 2800 rpm. An on-site inspection is possible. Cgedpfjwu Ez Nex Ahxot